Herd PB11C4-02 Bedienungsanleitung

Installation Guide

1-888-543-4373

www.HERD.com

1-888-543-4373

Part No: PB11C4-02-IG

Rev: C

Date: 2020-04-16

Important

•Herd Truck Guards are vehicle "Make & Model" specific. Use of a Truck Guard on a vehicle other than the

model it was designed for will constitute improper use of the product and may void warranty.

•Unless otherwise specified, Grade 8 or Class 10.9 hardware is to be used. For the purposes of these

instructions, OE hardware means the truck's original factory hardware.

•For further detail of warranty coverage and warranty repair information visit www.HERD.com.

SKU #

Truck Model

PB11C4-02

Peterbilt 365, 367,

567

General Safety

•Take time to fully read the instructions before installing the Herd Truck Guard.

•At all times exercise safe work shop practices, wear steel toe boots and safety glasses during installation.

•Parts and components of the Herd Truck Guard can be heavy, handle with care to avoid injuries.

•Respect power tools and use them as advertised.

For assistance call

1-888-543-4373

www.HERD.com

Thank you for choosing HERD!

HERD North America Inc.

2168 Springfield Road

Box 28, Group 525, RR5

Winnipeg, MB. Canada R2C 2Z2

Parts and Tools Referenced in this Installation Guide

1-888-543-4373

www.HERD.com

1-888-543-4373

Part No: PB11C4-02-IG

Rev: C

Date: 2020-04-16

Parts and Hardware Included

Item No

Part No

Description

Qty

2P6004

WLDMT-TRUCK GUARD PB11C4-02

100062

ASSY-UNIVERSAL BRACKET

1P6023

KIT –MOUNTING PB11C4-02

100027

C4-02 SLAM LATCH ASSEMBLY

100021

ASSY-LIFT ASSIST

100054

ASSY-HINGE

100058

KIT-CHANNEL STRUT

400014

KIT-RUMBER 20 MM

400040

KIT-AIR DEFLECTOR PB11

100046

KIT-CAS BRACKET

500167

NUT-NYLOCK 1/2-13 NC GR8 YZP

500263

WASHER-FLAT 1/2X1-1/2OD 1/4THICK

500206

WASHER-FLAT 1/2 SAE GR8 YZP

500169

NUT-NYLOCK 1/4-20 NC GR8 YZP

500208

WASHER-FLAT 1/4 SAE GR8 YZP

500095

BOLT-HEX 1/4-20X1 NC GR5 WZP

500173

NUT-NYLOCK 3/4-16 NF GR8 YZP

500211

WASHER-FLAT 3/4 SAE GR8 YZP

500085

BOLT-HEX 1/2-13X1-3/4 NC GR8 YZP

100049

WLDMT-TOW PIN

Installation Procedure

Part No: PB11C4-02-IG

Rev: C

Date: 2020-04-16

1-888-543-4373

www.HERD.com

1-888-543-4373

1. With the hood of the truck

closed, remove the bolts shown

on each side of the bumper.

OEM bumper can be removed.

Factory bumper uninstall (Passenger side shown)

Figure 1 –OEM Bumper Uninstall

Installation Procedure

Part No: PB11C4-02-IG

Rev: C

Date: 2020-04-16

1-888-543-4373

www.HERD.com

1-888-543-4373

2. Install HERD mounting brackets

onto truck frame. Do not tighten

bolts until installation is

complete.

Figure 2 –OEM Bumper Mount Removed from the truck

3. Install tow receiver mounts

(From Item 3) into truck tow

receivers. Remove the OEM

bolts indicated by arrows.

Figure 3 –Tow Receiver Mounts Installation

4. Install clevis pins (From Item 3)

through OEM tow receiver holes

and HERD tow receiver mounts.

Install hair pins into the clevis

pins from the PB11 Mounting Kit

(Item 3).

Figure 4 –Tow Receiver Clevis & Hair Pins Installation

Installation Procedure

Part No: PB11C4-02-IG

Rev: C

Date: 2020-04-16

1-888-543-4373

www.HERD.com

1-888-543-4373

5. Install driver side mounting

brackets (Item 3). Use ¾” flat

washers (Item 17) and nylon

locking nuts (Item 16) to attach

the mounting brackets to the

tow receiver mounts, torque to

150 lb-ft. Use the OEM washers

and bolts saved from Step 2 on

the bottom of the mounts,

torque to 110 lb-ft. Use

M16x2x50 and flat washer 5/8 to

mount the top side of the

mounting bracket to the truck

(Items 18 and 19). Try mount the

sub-mount level with respect to

the truck’s frame.

6. Repeat for the passenger side

Figure 5 –Side Mounting Bracket Installation

Driver side

OEM Hardware

18 -

Installation Procedure

Part No: PB11C4-02-IG

Rev: C

Date: 2020-04-16

1-888-543-4373

www.HERD.com

1-888-543-4373

7. Open truck guard by pulling on

the handle. Using lift, raise the

Truck Guard (Item 1) and

universal bracket (Item 2) and

attach to side mounting brackets

(Items 3). Do not tighten the

nuts.

Note:

If installer does not have a lift

available, truck guard can be

disassembled from the universal

bracket to simplify installation as

shown in step 7, otherwise

proceed to step 8.

Figure 6 –Universal Bracket Installation

8. a) Ensure truck guard is closed.

From underneath the truck

guard, remove the 3/8’’

hardware securing the lift assist

spring and slide off spring form

the lift assist (item 5)

Figure 7a –Bracket and Lift Assist Disassembly

Lift Assist Spring

3/8”Hardware

Installation Procedure

Part No: PB11C4-02-IG

Rev: C

Date: 2020-04-16

1-888-543-4373

www.HERD.com

1-888-543-4373

b) Once the springs are removed,

carefully open the truck guard

using the slam latch. Remove the

1/2” hardware securing the truck

guard to the universal bracket.

Remove truck guard and set aside

on cardboard. Now the bracket is

isolated for mounting without a

lift.

Figure 7b –Bracket and Truck guard Disassembly (Driver Side Shown)

9. Attach universal bracket

(Item 2) to mounting brackets

(Items 3). Level the bar to the

truck and then tighten the

fasteners (110 lb-ft). Use all the

available slots for mounting.

Note that the schematic view

of the bracket may differ from

what can be seen in Figure 8.

Figure 8 –Universal Bracket Side Mounting Location (Driver Side Shown)

12, 19

11, 13

1/2”Hardware

Installation Procedure

Part No: PB11C4-02-IG

Rev: C

Date: 2020-04-16

1-888-543-4373

www.HERD.com

1-888-543-4373

10. If truck guard was

disconnected from the

universal bracket in step 7,

reverse the procedure to

mount truck guard back onto

the bracket.

a) First ensure the truck

guard hinges are open.

b) Attach using previously

removed 1/2” bolts until the

hinge just slightly touches the

bracket.

c) Close the truck guard and

ensure the latch engages.

d) Open the truck guard and

tighten the bolts until they

are snug.

e) Close the truck guard again

to ensure the latches engage

properly.

f) Fully tighten the ½”

hardware to 110 ft⋅lb.

Latches may need to be

adjusted, refer to Slam Latch

Adjustment guide (S012).

g) Close the truck guard and

slide springs onto the lift

assist shaft, ensuring that

spring arms are inserted into

slots of truck guard. Reinsert

3/8” hardware securing the

lift assist springs.

Figure 9.1 –Bracket and Lift Assist Reassembly

Figure 9.2 –Bracket and Lift Assist Reassembly

Installation Procedure

Part No: PB11C4-02-IG

Rev: C

Date: 2020-04-16

1-888-543-4373

www.HERD.com

1-888-543-4373

11. Close the truck guard and

check fitment. Truck guard

position can be adjusted side

to side and up or down as

required. Once fitment is

confirmed, tighten all

mounting bolts to 110 lb-ft

(10 bolts total).

Figure 10 –Side Bracket Bolt Torque Specs (Driver Side Shown)

12. Install the air deflector

(Item 9) to the truck guard

(Item 1) as shown using the

supplied hardware

(Items 14, 15, 16).

Figure 11 –Air Deflector Installation

13. Install radar sensor, if truck is

equipped with one. Refer to

the HERD radar sensor

installation guide (S009) to

re-install your sensor.

Figure 12 –CAS Unit Installation

Important

•Check mounting points after the first 5000 km and every 3-6 months.

110 ft-lb

23, 24

Installation Procedure

Part No: PB11C4-02-IG

Rev: C

Date: 2020-04-16

1-888-543-4373

www.HERD.com

1-888-543-4373

•This truck guard is equipped with Herd Slam Latch which requires periodic adjustment. Refer to Slam Latch

Installation adjustment instructions (S001) to properly adjust your Slam Latch.

Andere Herd Autozubehör Handbücher

Herd

Herd SLAM LATCH Leitfaden

Herd

Herd FL33BG Bedienungsanleitung

Herd

Herd Aero Bedienungsanleitung

Herd

Herd C4 Series Bedienungsanleitung

Herd

Herd KW01 Bedienungsanleitung

Herd

Herd KW22C4-02 Bedienungsanleitung

Herd

Herd IN24A2 Bedienungsanleitung

Herd

Herd IN27BG Bedienungsanleitung

Herd

Herd Aero Series Bedienungsanleitung

Herd

Herd Defender Series Bedienungsanleitung

Herd

Herd WS30C4-02 Bedienungs- und Wartungshandbuch

Herd

Herd MK15C4-02 Bedienungsanleitung

Herd

Herd AeroPLUS C4-02 Leitfaden

Herd

Herd 404006 Bedienungsanleitung

Herd

Herd Aero Bedienungsanleitung

Herd

Herd Aero Bedienungsanleitung

Beliebte Autozubehör Handbücher anderer Marken

James Baroud

James Baroud Odyssey Bedienungsanleitung

Motorola

Motorola i50sx Bedienungsanleitung

Yakima

Yakima 9MM STANDARD BIKE MOUNT Bedienungsanleitung

Feniex

Feniex T3 Bedienungsanleitung

Kia

Kia E8300-4D000 Bedienungsanleitung

Brink

Brink 756843 Bedienungsanleitung

Whispbar

Whispbar K085W Bedienungsanleitung

v.link

v.link CI-VL2-PC-HSD Bedienungsanleitung

Viking

Viking Stack-Rack Kurzanleitung zur Einrichtung

Aries

Aries 203015 Bedienungsanleitung

Choetech

Choetech AT0005 Bedienungsanleitung

ZZ2

ZZ2 ZZAIR-PRO Bedienungsanleitung

Holman

Holman 4A80L Bedienungsanleitung

Thule

Thule 2075 Bedienungsanleitung

Motorola

Motorola T325 Bedienungsanleitung

TAUBENREUTHER

TAUBENREUTHER 16-3950 Installationsanleitung

DV8

DV8 FBJL-02 Bedienungsanleitung

Prorack

Prorack K1163 Bedienungsanleitung