HIK VISION IVMS-5200 Pro Installationsanleitung

iVMS-5200 Pro V 3.2.302

FAQ

FAQ of Parking System Client Software

1. Q: The platform requires entrance/exit should be added in pair by default. However, the

number of entrance/exit in most projects may be not exactly equivalent.

A: The entrance/exit should be added in pair. The extra entrance or the exit can be spared

which doesn’t associate with capture unit, display screen or barrier. For example, a parking

lot has 2 entrances and 3 exits. Then the user can add 3 pairs of entrances/exits and choose

one entrance to be spared.

2. Q: How long does the parking overstaying alarm support?

A: The current version supports Max allowed staying hours is 24 hours.

3. Q: What if the connection breaks between PES and CMS?

A: When the connection between CMS and PES breaks, the data can be saved up to 7 days in

the database.

4. Q: CMS cannot be installed properly. Why is it?

A: Because CMS should be installed on 64-bit PC. If CMS is installed on 32-bit PC, the

installation would be failed.

5. Q: Does Web Manager and Web Client can skip to each other’s page without login?

A: In the last version, Users need to exit the admin when switches Web Manager to Web

Client. Web Manager of V3.2.302 integrates module Web Client in Video System so users

can login Web Client directly. Then users can click the homepage icon in upper-left corner

back to Web Manager.

6. Q: Why does “free spaces”in PSCS keep unchanged when a vehicle enters or exits the

parking lot?

A: Users can check the latest “free spaces”information in the parking system of Web

manager and upper-right corner in PSCS. Generally speaking, free spaces keep unchanged

due to the entry rule was configured into Manual and the user didn’t either click open in the

barrier control. When the entry rule was configured into Manual, users need to click the

barrier control in PSCS manually. When the entry rule was configured into Auto, free spaces

would have change automatically.

7. Q: What do we need to pay attention when there is no trigger coil or smash-proof coil in the

spot?

A: Firstly, the trigger rule of capture unit should be configured into video triggering and the

identifiable area should be configured. Secondly, if there is no smash-proof coil in the spot,

the barrier couldn’t close automatically. When a vehicle passes the barrier, the user needs to

operate barrier controlmanually.

8. Q: Could PES be restarted if the connection between PES and CMS breaks?

A: No, PES couldn’t be restarted. Otherwise, PES would have registration failure.

9. Q: Is barrier control in PSCS still working when barrier is controlled by IPC and the entry

rule is configured into Auto of a parking lot?

A: Barrier Control in PSCS is working 24/7. There exits situation that needs manual

operation no matter which entry rule is.

10. Q: Is there necessary to install Control Client in entrance/exit of some parking lots?

A: Users can only check the status of devices, SMS and SS in Control Client, operate live

view of multiple windows and manage non-parking lot monitoring points. We advise users to

install Control Client with PSCS together.

11. Q: Tips for the storage of Platform.

A: The storage of passing vehicles starts as soon as the parking lot is edited and associated to

PES. After PES and SS are associated, the capturing pictures of passing vehicles would be

saved. But users need to allocate the percentage of picture storage and record schedule of

video storage.

12. Q: The Closing time of Parking after Closing Time Alarm is a timing point, but the

Forbidden Period Alarm is a time period. Why is that?

A: Parking after Closing time refers that platform will send alarm to users when the closing

time is up. Forbidden Period Alarm refers that platform will send alarm to users when

vehicles enters/exits the parking lot in the forbidden period. If Parking after Closing Time

Alarm and Forbidden Period Alarm need to be configured at the same time, users can set up

the timing point of Parking after Closing Time Alarm as the starting time of Forbidden Period

Alarm.

13. Q: Could the user still search the vehicle recordings and pictures of last PES if the PES and

SS of the parking lot were changed?

A: Yes. The parking lot is the target of search, and earlier pictures were saved in former SS.

The following pictures will be saved in the new SS.

14. Q: Does the platform display the current status of barrier? Will the platform send success

order when it controls barrier?

A: The platform wouldn’t display the status of barrier. When the platform failed in sending

order and displayed “Open barrier failed operation”, users need to check the control

connection and relay’s working status.

15. Q: One platform supports up to 100 pairs of entrances/exits and up to 200 capture units. Is it

necessary to deploy SMS?

A: Generally speaking, we advise users to configure 24 hours record schedule and add SMS

for capture unit. SMS can extremely reduce the bandwidth pressure of front-end devices.

16. Q: The Playback function doesn’t work in PSCS. Why is that?

A: The prerequisite of Playback function are record schedule configuration and playback

permission.

17. Q: If a vehicle arrives at the entrance, but it doesn’t enter the parking lot. Will the data be

saved in platform?

A: Yes. The data will be saved as soon as the capture unit is triggered by vehicles. When

barrier opens, the vehicle will be regarded as successfully entered the parking lot. Entry Rule

in Web Manager has 3 types: Not Allowed, Allowed and Manual. These types mean:

Captured not entered, entered with Auto Rule, entered with Manual Rule. Users can also

check the status in No Exit Record Vehicle.

18. Q: What is the meaning of Exception vehicles of Parking Type in Search function in Web

Manager?

A: Parking Type has 4 kinds: Whitelist vehicles, Blacklist vehicles, Temporary vehicles and

Exception vehicles. Exception Vehicles refer to vehicles enters the parking lot with manual

rule and not captured by camera.

19. Q: If a parking lot has serval pairs of entrances/exits, does PSCS can have live view of these

entrances/exits?

A: Users can have live view of one pair at the same time, but other entrances/exits can be

switched.

20. Q: Whitelist/Blacklist can be configured in the capture unit. How to do it?

A: The function can be used when capture unit is configured into camera control mode. But

Version 3.2.302 should be configured into platform control mode. The control order is

determined and sent by PES so the Whitelist/Blacklist Alarm function couldn’t be realized.

We advise users not to use this function when operate iVMS-5200 Professional.

21. Q: In some parking lots, securities used to use remote controller to controlbarrier.

A: We advise not to use remote controller. Remote controller sends control order to barrier,

but the order doesn’t go through platform. Frequent use of remote controller would affect the

accuracy of free spaces.

22. Q: Does LPR function include plates color, vehicle type and vehicle logo?

A: No. The capture details include plate number and country information.

23. Q: The Whitelist Alarm has already been configured, but no alarms were displayed in Alarm.

A: Whitelist/Blacklist Alarm should be added in Vehicle List in advance. The alarm

parameters defaults blacklist alarm sends alarm. If users need Whitelist/Blacklist Alarm both,

alarm parameters of Whitelist Alarm in Vehicle List also needs to be configured.

24. Q: What kinds of reports does The Parking Lot Traffic Flow support?

A: Version 3.2.302 supports histogram report and table report.

25. Q: Users may click “Barrier Control”repeatedly when only one vehicle was captured by a set

of camera unit. Such operation would affect the accuracy of system to calculate free spaces.

A: No. To prevent such operation affecting the accuracy, System only calculates one “Barrier

Control”order even though the user may click the order repeatedly.

26. Q: Does TPE100 can store video recordings?

A: The Max storage space of TPE100 is 4T. Picture storage is recommended, but not video

storage.At the same time we advise to store videos in the surveillance center.

27. Q: Does PSCS can only be installed in entrance/exit?

A: We advise users to install PSCS in entrance/exit, surveillance centers of parking lot and

headquarter. The current version only supports checking alarms via PSCS. The guard stand

has no permission to operate Web Manager, and PSCS manages the entrance/exit.

28. Q: Users can set permission allocation in User Manager to prevent PSCS installed in other

PSCS to controlthe barrier.

A: Version 3.2.302 doesn’t support the function. All PSCS can control the barrier no matter

where the client is.

29. Q: Could Entrance/Exit share the same display screen?

A: Yes. Version 3.2.302 supports the information of entrance/exit displayed in the same

screen.

30. Q: Could users use alarm of capture unit in Web Manager, such as Motion Detection and

Device Offline?

A: No. Even if the alarm can be configured in the Web Manager, the configuration is useless.

As soon as the capture unit was armed by platform, it doesn’t support the upload of other

alarm types.

31. Q: CMS and PES can be installed in one server in centralized deployment scenario.

A: CMS and PES can be installed together when CMS only manages the monitoring point of

parking lot. But when CMS manages multiple monitoring points of parking lot and building,

we advise to install CMS and PES separately. The installation principle also goes for SMS

and SS.

32. Q: Could alarms still be handled normally when CMS and PES become offline?

A: Yes. PES can handle the alarm even if CMS and PES become offline.

33. Q: What is the difference between Series-4 camera and Series-9 camera in deployment?

A: The difference is in the barrier control. The current version only supports customized

Series-4 camera and customized Series-9 camera, namely IPC control. But in the practical

programs, Series-4 camera baseline only supports serial port. And pixels, bitrate and storage

space of Series-4 and Series-9 are also different and should be calculated separately. As to the

camera type, please consult Pre-sales engineer.

34. Q: When users click PSCS, the system would popup the tip “The screen resolution is lower

than the recommended resolution and the client may not display correctly. Continue?”Why is

that?

A: The resolution of PSCS is different with Control Client. When the screen resolution is

lower than the recommended resolution, the system would popup the tip. Generally speaking,

the screen resolution of a desktop PC can meet with the requirement of PSCS, but the

resolution of a notebook may be lower than the requirement.

35. Q: There are Entry Picture and Live View in Vehicle Tracking module. How to deal with the

problem that Entry Picture cannot be displayed when users restart PSCS or click Switch

User?

A: Firstly, please check the working status of PES and the capture unit. If the working

status is normal, then entry picture would be displayed in a few seconds generally. If not,

please click Reboot in Configuration of capture unit and check the connection between PES

and PSCS. When PSCS is deployed in external network, please check whether the ports of

PES are forwarded or not.

36. Q: The range of Free Space is -20000~20000. When the value of Free Space is negative

number?

A: The negative number applies to the situation when there is no free space in the parking lot,

but the security still allows vehicle to enter. At the moment, the actual free space is negative

number.

37. Q: If the capture unit in entrance/exit failed in recognizing plates, the barrier would keep

closed. At this moment, the security could open the barrier manually. Then does the system

support in inputting passing vehicles’information manually?

A: To avoid the error occurred by inputting passing vehicles’information manually, all

information of passing vehicles should be sent by the capture unit.

38. Q: What’s the difference between WAN IP configuration in Basic Settings and in Parking

System?

A: WAN IP configuration represents the WAN IP of CMS on Basic Settings. However, WAN

IP in Parking System represents the WAN address of Parking System. When the parking

system is deployed in internal network and Mobile Video Recorder is deployed in external

network, users need to configure WAN IPon Basic Settings, not Parking System.

39. Q: What’s the function of Matching Rule? Do users need to configure it on Web Manager?

A: To increase the matching efficiency in the process of plates’recognition, iVMS-5200 Pro

(V3.2.302) provides Matching Rule for advance search of license plate number. When the

leaving vehicle has no entry record, users can use Matching Rule to search out the plates.

Users can also set the parallel characters as Matching Rule depends on actual situation.

40. Q: What’s the function of Barrier Lock in PSCS?

A: Barrier Lock is the order sent by smash-proof coil. If Barrier Lock is enabled, the order

sent by smash-proof coilwould be invalid and the barrier would keep open.

41. Q: Does the system support Barrier Control when entrance and exit are deployed together?

A: Yes. There are 2 barriers when entrance and exit are deployed together. Users can choose

IPC Control, TPE 100 and Control Terminal to control the barrier. If users choose Control

Terminal, the serial ports need to be extended in advance.

42. Q: Live View is working normally, but Entry/Exit Picture cannot be displayed in PSCS.

A: Please check the working status of Storage Server or NVR.

Inhaltsverzeichnis

Andere HIK VISION DVR Handbücher

HIK VISION

HIK VISION DS-90 HWI-ST Series Bedienungsanleitung

HIK VISION

HIK VISION DS-7208HUI-K2 Bedienungsanleitung

HIK VISION

HIK VISION Ds-7604ni-e1, ds-7608ni-e1 Bedienungsanleitung

HIK VISION

HIK VISION HiLook Series Bedienungsanleitung

HIK VISION

HIK VISION RH5xx Series Bedienungsanleitung

HIK VISION

HIK VISION DS-9600NI-H8 Bedienungsanleitung

HIK VISION

HIK VISION DS-8100-S Series Benutzerhandbuch

HIK VISION

HIK VISION DS-7108HI-S Bedienungsanleitung

HIK VISION

HIK VISION DS-7600 Series Bedienungsanleitung

HIK VISION

HIK VISION DS-9104HFI-S Bedienungsanleitung

HIK VISION

HIK VISION DS-B116HCI-ST Bedienungsanleitung

HIK VISION

HIK VISION Digital Video Recorder Bedienungsanleitung

HIK VISION

HIK VISION DS-8004HSI-S Bedienungsanleitung

HIK VISION

HIK VISION UD13435B Bedienungsanleitung

HIK VISION

HIK VISION DS-9600NI-I16 Series Bedienungsanleitung

HIK VISION

HIK VISION DS-7204HVI-S Series Bedienungsanleitung

HIK VISION

HIK VISION DS-7100HGHI-K1/R Series Bedienungsanleitung

HIK VISION

HIK VISION DS-9500 Series NVR Benutzerhandbuch

HIK VISION

HIK VISION DS-8000AHI Series Bedienungsanleitung

HIK VISION

HIK VISION DS-7100NI-SL series Benutzerhandbuch

HIK VISION

HIK VISION DS-7104HGHI-SH Bedienungsanleitung

HIK VISION

HIK VISION DS-90 HUHI-F8/N Series Bedienungsanleitung

HIK VISION

HIK VISION DS-9000 Series Bedienungsanleitung

HIK VISION

HIK VISION DS-7300HI-ST Series Bedienungsanleitung

Beliebte DVR Handbücher anderer Marken

FLIR

FLIR M3100E Series Bedienungsanleitung

VTRACKPRO

VTRACKPRO FPRO300 Bedienungsanleitung

Swann

Swann NVR-7085 models Bedienungsanleitung

XtendLan

XtendLan DVR-1670C Bedienungsanleitung

urmet domus

urmet domus 1093/004AHD Bedienungsanleitung

Holux

Holux M1 Bedienungsanleitung

CMOS DOTCOM

CMOS DOTCOM ANX-1670 Bedienungsanleitung

Whistler

Whistler D16VRS Bedienungsanleitung

Defender Security

Defender Security 82-20235 Bedienungsanleitung

MISUMI

MISUMI MP-WF100M Bedienungsanleitung

Speco

Speco D8HU Bedienungsanleitung

UST

UST DDR-E04AA Gebrauchsanweisung

Consolidated

Consolidated Digital Video Recorder Bedienungsanleitung

Mace

Mace DVR0404RW Kurzanleitung

RCA

RCA RTD315W Bedienungsanleitung

FSM

FSM Colibri Grande PRO Bedienungsanleitung

Hauppauge

Hauppauge HD PVR 2 Bedienungsanleitung

Identivision

Identivision ICR-PH161i PIONEER Bedienungsanleitung

HIK VISION iVMS-5200 Pro Installationsanleitung

Beliebte DVR Handbücher anderer Marken