Hioki 7016 Bedienungsanleitung

OPERATION GUIDE

SIGNAL SOURCE

7016

Contents

Introduction ............................................................... 1

Chapter 1 Source Function 3

1.1 Basic Sourcing Procedure........................... 4

1.2 Constant-Voltage Source (DCCV)............... 6

1.3 Constant-Current Source (DCCC)............... 8

1.4 Pulse Source (PULSE).............................. 10

1.5 Using Memory Function

(SCAN and RAMP).................................... 12

1.5.1 Using the SCAN Function .............. 12

1.5.2 Using the RAMP Function.............. 17

Chapter 2 Measurement Function 21

2.1 Basic Measurement Procedure

(Common Procedure)................................ 21

2.2 Measuring Voltage .................................... 23

2.3 Measuring Current..................................... 25

2.4 Measuring Frequency................................ 27

2.5 Measuring the Resistance......................... 28

2.5.1 Continuity Test ............................... 30

2.6 Diode Test ................................................. 31

2.7 Measuring Temperature ............................ 32

Contents

Chapter 3 Special Measurement

Functions 33

3.1 Recording Function ................................... 34

3.2 Data Hold / Refresh Hold Function ........... 36

3.3 Relative (relative display) Function ........... 38

3.4 1-ms Peak Hold Function.......................... 39

3.5 Dual Display Function ............................... 41

Introduction

This manual describes the basic operation of

HIOKI 7016 SIGNAL SOURCE.

❖Details→Instruction manual for the 7016

Introduction

Symbols

❖Indicates the reference.

Indicates quick references for operation.

Introduction

Source Function Chapter 1

Important!

• The yellow labels around the outer circum-

ference of the function selector indicate

signal source/generation

• functions.

• The [SHIFT] button must first be pressed

to enable the source-related button func-

tions.

1.1 Basic Sourcing Procedure

1. Set the slide switch to the

[M/S] position.

Set the function

selector to the follow-

ing position.

(ex. Sourcing constant-

current)

Sourcing constant-voltage [CV]

Sourcing constant-current [CC]

Sourcing pulse [PULSE]

Using memory function Voltage source: [CV]

Current source: [CC]

1.1 Basic Sourcing Procedure

4. Press the [MODE] button as necessary to select

the source mode or the parameter on the second-

ary display.

5. Making the settings with the [W], [X], [S], or [T]

button.

7. Press the [OUTPUT] button again to disable out-

put. Verify that is no longer displayed.

Press the [SHIFT] button

and confirm that is

displayed on the LCD. (Ex. Voltage Source)

The source-related button functions are now enabled.

Press the [OUTPUT] but-

ton and output the setting

value. Verify that is

displayed on the LCD. (Ex. Voltage Source)

1.2 Constant-Voltage Source (DCCV)

This mode outputs a constant current at the set

value regardless of load.

Procedure

1.2 Constant-Voltage Source (DCCV)

1. Set the slide switch. [M/S]

2. Set the function selector. [CV]

3. Press the [SHIFT] button. Confirm that

is displayed.

Press the [

MODE

] button as nec-

essary to select the source mode

on the secondary display.

Source Mode

• Constant-voltage

source 1.5 V range

• Constant-voltage

source 15 V range

• Constant-voltage

SCAN source 1.5 V

range

• Constant-voltage

SCAN source 15 V

range

• Constant-voltage

RAMP source 1.5

V range

• Constant-voltage

RAMP source 15 V

range

Andere Handbücher für 7016

Inhaltsverzeichnis

Andere Hioki Messgerät Handbücher

Hioki

Hioki RM3545A-1 Benutzerhandbuch

Hioki

Hioki DM7275-01 Bedienungsanleitung

Hioki

Hioki 8835-01 Bedienungsanleitung

Hioki

Hioki SAFETY HiTESTER 3258 Gebrauchsanweisung

Hioki

Hioki 3246-60 Bedienungsanleitung

Hioki

Hioki 3274 Bedienungsanleitung

Hioki

Hioki L2002 Bedienungsanleitung

Hioki

Hioki 3390-10 Gebrauchs- und Pflegehandbuch

Hioki

Hioki CM4375 Bedienungsanleitung

Hioki

Hioki CHT3548 Bedienungsanleitung

Hioki

Hioki 9010 Bedienungsanleitung

Hioki

Hioki DSM-8542 Bedienungsanleitung

Hioki

Hioki MR8740T Gebrauchsanweisung

Hioki

Hioki 3169-20 Bedienungsanleitung

Hioki

Hioki CM3286 Bedienungsanleitung

Hioki

Hioki 7015 Bedienungsanleitung

Hioki

Hioki PW3198 Bedienungsanleitung

Hioki

Hioki PW8001-01 Bedienungsanleitung

Hioki

Hioki IM3523 Gebrauchs- und Pflegehandbuch

Hioki

Hioki 3506-10 Bedienungsanleitung

Hioki

Hioki IM3533 Bedienungsanleitung

Hioki

Hioki Hioki Bedienungsanleitung

Hioki

Hioki PQ3198 Bedienungsanleitung

Hioki

Hioki MR8740 Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

ELMETRON

ELMETRON CP-511 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

EXFO

EXFO FTB-2 Bedienungs- und Wartungshandbuch

Keysight

Keysight M8290A Bedienungsanleitung

ADTEK

ADTEK MW-5 Bedienungsanleitung