Hirschmann OWL LTE Bedienungsanleitung

UM Installation OWL_LTE

Release

1.0

09/2015 Technical Support

https://hirschmann-support.belden.eu.com

User Manual

Installation

OWL LTE (Industrial Cellular Router)

Thenamingofcopyrightedtrademarksinthismanual,evenwhennotspeciallyindicated,should

not be taken to mean that these names may be considered as free in the sense of the trademark

and tradename protection law and hence that they may be freely used by anyone.

Manualsandsoftwareare protectedby copyright.All rightsreserved.Thecopying,reproduction,

translation, conversion into any electronic medium or machine scannable form is not permitted,

either in whole or in part. An exception is the preparation of a backup copy of the software for

your own use. For devices with embedded software, the end-user license agreement on the

enclosed CD/DVD applies.

The performance features described here are binding only if they have been expressly agreed

when the contract was made. This document was produced by Hirschmann Automation and

ControlGmbHaccordingtothebestofthecompany'sknowledge.Hirschmannreservestheright

to change the contents of this document without prior notice. Hirschmann can give no guarantee

in respect of the correctness or accuracy of the information in this document.

Hirschmann can accept no responsibility for damages, resulting from the use of the network

components or the associated operating software. In addition, we refer to the conditions of use

specified in the license contract.

You can get the latest version of this manual on the Internet at the Hirschmann product site

(http://www.hirschmann.com).

Hirschmann Automation and Control GmbH

Stuttgarter Str. 45-51

72654 Neckartenzlingen

Germany

Tel.: +49 1805 141538

Rel. 1.0 - Installation – 04.01.2016

Contents

UM Installation OWL_LTE

Release

1.0

09/2015

About this Guide 5

Legend 6

GPL License 7

Safety Instructions 8

1 Router Description 13

2 Contents of Package 15

3 Router Design 17

3.1 Router Versions 18

3.2 Delivery Identification 19

3.3 Basic Dimensions of Router Box 20

3.4 Mechanical Dimensions and Mounting Recommendations 21

3.5 Removing from the DIN rail 23

3.6 Description of the rear panel 24

3.7 Description of the Front Panel 25

3.7.1 Status Indication 26

3.7.2 Power Connector 27

3.7.3 Grounding the device (functional earth) 28

3.7.4 Antenna Connectors 28

3.7.5 SIM Card Reader 30

3.7.6 MicroSD card reader 31

3.7.7 Reset 32

3.7.8 Ethernet Ports ETH0 & ETH1 32

3.7.9 USB Port 34

3.7.10 I/O Port 35

3.7.11 RS232 interface 37

4FirstUse 39

4.1 Connecting Components before the First Use 40

4.2 Start 42

4.3 Configuration 43

4.3.1 Configuration using a Web Browser 43

5 Technical Parameters 45

Contents

UM Installation OWL_LTE

Release

1.0

09/2015

5.1 Basic parameters 46

5.2 Type tests and environmental conditions 47

5.3 Technical Parameters of module 48

5.4 Technical Parameters of the processor 49

5.5 Technical parameters of the GPS 50

5.6 Technical parameters of the I/O port 51

5.6.1 Characteristics of inputs 51

5.6.2 Binary output parameters 51

5.6.3 PoE PD Technical Parameters – PSE Requirements 52

5.7 Other technical parameters 53

6 Recommended literature 55

6.1 Available Literature 56

7 Possible problems 57

7.1 Solutions 58

8FAQ 59

9 Customers Support 61

9.1 CE-marking 62

9.2 E marking 63

A Further Support 65

About this Guide

UM Installation OWL_LTE

Release

1.0

09/2015 5

About this Guide

This document provides technical specifications for the Industrial Cellular

Router and illustrates the hardware installation for a Hirschmann Industrial

Cellular Router. It also helps the developers to validate their application

design using the Industrial Cellular Router.

The information in this publication contains general descriptions or

performance factors which, when applied in an actual situation, do not

always correspond with the described form and may be amended by way of

further development of products. The desired performance factors shall only

be deemed binding if these are expressly agreed on conclusion of the

contract. Please note that some characteristics of the recommended

accessory parts may differ from the appropriate product. This might limit the

possible operating conditions for the entire system.

About this Guide

Legend

UM Installation OWL_LTE

Release

1.0

09/2015

Legend

The designations used in this manual have the following meanings:

List

Work step

Subheading

Link Cross-reference with link

Note: A note emphasizes an important fact or draws your attention to a dependency.

Courier ASCII representation in the graphical user interface

About this Guide

UM Installation OWL_LTE

Release

1.0

09/2015

GPL License

Source codes under the GPL license are available free of charge. Send an

email request to:

[email protected]

About this Guide

Safety Instructions

UM Installation OWL_LTE

Release

1.0

09/2015

Safety Instructions

General safety instructions

You operate this device with electricity. The safe operation of the device

dependsonproperhandlingduringtransportation,storageandassembly,

and proper use of operation and maintenance procedures. Improper use

of this device can cause injury or property damage.

Read this documentation, safety instructions and warnings before

connecting any cables.

Never start an operation with damaged components.

The device does not contain any service components. If the device is

not functioning correctly, or if it is damaged, turn off the power supply

and return the device to Hirschmann for inspection.

Qualification requirements for personnel

Allow only qualified personnel to work on the device who have the

following characteristics:

Properly trained personnel who have practical knowledge and

experience. This is the prerequisite for grounding and labeling

circuits, devices, and systems in accordance with current

technology safety standards.

Qualified personnel are aware of the dangers that exist in their

work.

WARNING

UNCONTROLLED MACHINE ACTIONS

To avoid uncontrolled machine actions caused by data loss, configure all

the data transmission devices individually.

Before you start any machine which is controlled via data transmission, be

sure to complete the configuration of all the data transmission devices.

Failure to follow these instructions can result in death, serious injury,

or equipment damage.

About this Guide

UM Installation OWL_LTE

Release

1.0

09/2015

Safety Instructions

Qualified personnel are familiar with appropriate measures against

thesehazards inorder to reduce the risk for themselves and others.

Qualified personnel receive training on a regular basis.

Intended usage

Use the product only for the application cases described in the

Hirschmann product information, including this manual.

Operate the product according to the technical parameters. See “First

Use” on page 39.

Connect components which are suitable for the requirements of the

specific application to the product.

National and international safety regulations

Verify that the electrical installation meets applicable national and

international safety regulations.

Working voltage

Connect only a working voltage that corresponds to the type plate of

your device.

Make sure the following requirements are met every time you connect

the electrical conductors:

The power supply conforms to over voltage category I or II.

The power supply has an easily accessible disconnecting device

(such as a switch or a plug) which is clearly identified. So in case

of an emergency, it is clear which disconnecting device belongs to

which power supply cable.

The electrical wires are voltage-free.

The power supply is Class 2 compliant.

The working voltage inputs are designed for operation with safety

extra-low voltage. Connect only SELV circuits with voltage

restrictions in line with IEC/EN 60950-1 to the working voltage

connections.

The wire diameter of the power supply cable is at least 0.5 mm²

(North America: AWG20) on the working voltage input.

About this Guide

Safety Instructions

UM Installation OWL_LTE

Release

1.0

09/2015

The wire diameter of the ground conductor is at least 0.5 mm²

(North America: AWG20).

The power supply cables used are permitted for the temperature

range required by the application case.

The power cords are suitable for ambient air temperatures of at

least 167 °F (75 °C). The power cord wires are made of copper.

Turn on the operating voltage for the device only when the following

requirements are fulfilled:

The housing is closed

The terminal block is wired correctly

The terminal block for the operating supply is connected

Installation site requirements

Verify that there is at least 4 in (10 cm) of space above and below the

device.

Verify that there is at least 0.8 in (2 cm) of space on the right and left

sides of the device.

Verify that there is at least a minimum distance of 20cm between the

antenna and the human body.

Housing

Never insert pointed objects (narrow screwdrivers, wires, etc.) into the

device or into the connection terminals for electric conductors. Do not

touch the connection terminals.

Inhaltsverzeichnis

Andere Hirschmann Netzwerk-Router Handbücher

Hirschmann

Hirschmann EAGLE30-0402 series Bedienungsanleitung

Hirschmann

Hirschmann PowerMICE Bedienungsanleitung

Hirschmann

Hirschmann RSB20 Bedienungsanleitung

Hirschmann

Hirschmann RS20 series Bedienungsanleitung

Hirschmann

Hirschmann MICE MS20-0800 Series Bedienungsanleitung

Hirschmann

Hirschmann GigaLION-24TP Bedienungsanleitung

Hirschmann

Hirschmann OWL3G Bedienungsanleitung

Hirschmann

Hirschmann OWL LTE M12 Bedienungsanleitung

Hirschmann

Hirschmann MACH 4000 Series Bedienungsanleitung

Hirschmann

Hirschmann RS2-FX-LH/FX-LH Handbuch

Hirschmann

Hirschmann RS30-...U Series Bedienungsanleitung

Hirschmann

Hirschmann OCTOPUS OS3 Bedienungsanleitung

Hirschmann

Hirschmann RS20 series Bedienungsanleitung

Hirschmann

Hirschmann MACH104-20TX-FR Series Bedienungsanleitung

Hirschmann

Hirschmann GECKO 4TX Bedienungsanleitung

Hirschmann

Hirschmann OCTOPUS 5TX-EEC Handbuch

Hirschmann

Hirschmann HiSecOS EAGLE20 Bedienungsanleitung

Hirschmann

Hirschmann MACH 1020 Bedienungsanleitung

Hirschmann

Hirschmann MICE MS20-1600 Series Bedienungsanleitung

Hirschmann

Hirschmann MS30, Power MICE, MACH 4000, OCTOPUS Bedienungsanleitung

Hirschmann

Hirschmann SPIDER 3TX-TAP Handbuch

Hirschmann

Hirschmann OWL3G Bedienungsanleitung

Hirschmann

Hirschmann RSR20-0900 Bedienungsanleitung

Hirschmann

Hirschmann MACH 4000 Series Bedienungsanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Korenix

Korenix JetNet 5710G Series Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise