Hitachi CV710 Bedienungsanleitung

How to use your

HITACHI

Vacuum cleaner

MODEL:CV710

1 2

4 5 6

7 8 9

CLICK

1 14 15

10 11 12

16b 17

20 21 22

CLICK

2 24 25

26 27 28

16a

0 1

HITACHI CV-710

OPERATING INSTRUCTIONS

I. SAFETY PRECAUTIONS

• Before putting the app iance into operation for the first time, p ease read this instruction

book and study the diagrams thorough y. This instruction book shou d be retained for

future reference.

• Check that the vo tage indicated on the rating abe is the same as the

• vo tage of your mains supp y.

• The plug of the supply cord should be removed from the mains socket before

cleaning the appliance or undertaking maintenance operations.

• This appliance is intended for home use only.

• Your vacuum cleaner is not a toy. Do not allow children to play with the cleaner.

• Never put the hose or nozzle near your eyes or ears.

• Never operate the cleaner with wet hands or feet.

• Never leave the appliance running unattended.

• This vacuum cleaner is not intended for cleaning wet or damp flooring.

Water entering the motor unit can cause permanent damage, putting the c eaner out

of operation. This defect is not covered by guarantee.

• To avoid damage to the dust bag and c eaner mechanics, never use the c eaner to

remove sharp artic es such as broken g ass, hot, vo ati e or exp osive materia s such

as burning cigarette butts, matches, ashes or other smoking materia . These are potentia

fire hazards.

• If the c eaner is used to remove very fine partic es such as fine sand, cement or simi ar

substances, the pores of the dust bag may become b ocked, which wi cause the air

throughput capacity of the fi ter to be diminished, resu ting in poor performance of the

c eaner. If this situation occurs, p ease rep ace the dust bag and micro-fi ters, even

if the dust bag is on y part y fi ed.

• If the supp y cord is damaged, it must be rep aced by the manufacturer or its service

agent or a simi ar y qua ified person in order to avoid a hazard.

• Any b ockages or obstructions to the suction in et, rug, f oor too , extension pipe, hose

or the exhaust air out et can cause oss of power and overheat the motor.

• The manufacturer sha not be he d iab e for any damage caused by incorrect use

of the c eaner

II. ACCESSORIES

F oor nozz e (figure 1)

Upho stery nozz e (figure 2)

Dusting brush (figure 3)

Crevice nozz e (figure 4)

Two part te escopic suction tubes (figure 7)

For troub e free operation of the

c eaner, on y use genuine Hitachi

bags and micro-fi ters.

III. OPERATING FEATURES OF THE VACUUM CLEANER

HITACHI CV-710

This cleaner incorporates the following features:

• dust bag fu indicator

• reusab e c oth bag

• four micro-fi ters (one in et and three exhaust)

• carrying grip

• e ectronic speed contro

• te escopic tubes

• optiona doub e paper bag PB4

IV. PREPARING THE VACUUM CLEANER FOR USE

Assemb e the c eaner accessory parts as shown in figures 5,6 and 7. NB. To use the

dusting brush (figure 3), s ide the upho stery nozz e (figure 2) into the s ots on the back

of the dusting brush.

Fu y extend the power cord and p ug from the app iance to the mains. The c eaner can be

switched ON/OFF with the button showing I/O (figure 8) The suction force can be a tered

by turning the suction contro on the suction hose (figure 9) and by the s ide contro

(figure 10). After you have finished c eaning, unp ug the c eaner from the mains. To retract

the mains cord into the body of the c eaner, first ho d the power p ug in your hand then

press the button showing a p ug (figure 11).

CAUTION: the power plug must be held when retracting the power cord to prevent

injury due to whiplash etc.

The c eaner can be he d and carried by the carrying grips in the c eaner body (figure 27).

The c eaning accessories can be either disassemb ed or eft assemb ed and hooked

on the c eaner side or bottom in the standby position (figures 28 & 29).

Full-bag indicator

Check the c eaning power by ifting the f oor nozz e from the surface (with the power set to

maximum) and the suction contro on the hose c osed. Shou d the indicator ight, the dust

bag must be rep aced (figure 12).

Replacing the dust bag

After depressing the id ock in the front of the id (figure 13) , ift the id to the open position

(figure 14). Remove the ho der carrying the dust bag (figure 15). Remove the dust bag

from the dust bag ho der by pu ing the catch (figures 16a & 16b). Rep ace the dust bag in

the dust bag ho der. Its curved edge with the recess in the dust bag face shou d fit against

the s ot in the dust bag ho der, so that the dust bag catch is engaged (figure 17). Fo owing

the above dust bag remova procedure in the reverse order, insta the dust bag ho der

carrying the dust bag into the c eaner compartment and c ose the id.

Important:

The safety catch (figure 20) does not a ow the c eaner id to be shut as ong as there is no

paper bag insta ed.

Exchanging micro-filters

Usua y after five paper bags have been fi ed, the micro-fi ters must be exchanged for new

ones. To exchange the intake micro-fi ter, pu the gri ho ding the micro-fi ter upwards from

the dust bag compartment (figure 21). Open the gri cartridge and exchange the micro-fi ter

(figure 22). To exchange the exhaust micro-fi ters, press the ock in the c eaner gri e

bottom, ift the gri e and remove it from the c eaner (figure 23). Remove the fi ter cartridge

with the micro-fi ters (figure 24) and rep ace the fi ters with new ones (figure 25).

WARNING: Failure to replace the micro-filters regularly can result in cleaner

damage! P ease ensure that rep acement micro-fi ters are insta ed as detai ed

be ow:

Pre-motor micro-filter: The pre-motor micro-fi ter must be insta ed so that its green side

faces the c eaner compartment.

Reusable cloth dust bag

A reusab e c oth dust bag is supp ied as standard accessory. The c oth dust bag is

removed and reinsta ed in exact y the same way as the paper dust bag.

To empty the dust bag, proceed as follows:

1. Remove the bag from the ho der and the c amp bar by pu ing to the side (Figure 30).

The c oth bag can be opened and the dust shaken and emptied. (Figure 31).

2. Reinsta the c amp bar by fo owing the above procedure in the reverse order. Put the

bag back in its ho der and insta the bag and the ho der in the c eaner.

Important precautions:

- never wash or dip the c oth dust bag in water

- never use a damaged c oth dust bag

- the safety catch (Figure 20) wi not a ow the c eaner id to shut if no dust bag

(paper or c oth) has been insta ed

Exhaust micro-filter: The exhaust micro-fi ter must be insta ed in the gri e cartridge, so

that green part of the e ement is visib e from the gri e. The second

green/white e ement shou d be insta ed behind the first green/white

e ement and the b ack carbon e ement shou d be insta ed behind

the two green/white e ements. (The sequence of the fi ter e ements

is as fo ows: gri e, green/white, green/white, b ack carbon.)

Storing the cleaning accessories

The upho stery, crevice too s and brush can be stored in the storage compartment of the

c eaner under a separate id (figure 26).

V. MAINTENANCE

Store the c eaner in a dry p ace and protect it from any heat source. Protect the c eaner

from exposure to the e ements such as rain or sunshine. C ean the app iance surface with

a damp soft c oth and never use abrasive or corrosive c eaners.

VI. THE ENVIRONMENT

As far as possib e (taking into consideration component sizes) most of the components

have an indication of the materia s uti ised for manufacture and a recyc ing mark.

Once the c eaner is past its service ife, p ease dispose of the c eaner via a recyc ing

network operated for this purpose.

Any repairs to this appliance should only be carried out by an authorised service

agent.

VII. SPECIFICATIONS

Vo tage (V) 230-240

Rated power (W) 1200

Peak power (W) 1500

Insu ation c ass II.

Noise eve (dBA) 75

Air throughput (I/s) 45

Negative pressure (kPa) 25

Specifications are subject to change for performance improvement without notice.

This product conforms with directives 89/336/EEC and 73/23/EEC pertaining

to e ectromagnetic compatibi ity and safety.

Hitachi, Ltd. Tokyo, Japan

International Sales Division

THE HITACHI ATAGO BUILDING,

No. 15 –12 Nishi Shinbashi, 2 –Chome,

Minato –Ku, Tokyo 105-8430, Japan.

Tel: 03 35022111

HITACHI EUROPE LTD,

Whitebrook Park

Lower Cookham Road

Maidenhead

Berkshire

SL6 8YA

UNITED KINGDOM

Tel: 01628 643000

Fax: 01628 643400

Email: consumer-service@hitachi-eu.com

HITACHI EUROPE S.A.

364 Kifissias Ave. & 1, Delfon Str.

152 33 Chalandri

Athens

GREECE

Tel: 1-6837200

Fax: 1-6835964

Email:service.hellas@hitachi-eu.com

HITACHI EUROPE GmbH

Munich Office

Dornacher Strasse 3

D-85622 Feldkirchen bei München

GERMANY

Tel: +49-89-991 80-0

Fax: +49-89-991 80-224

Hotline: +49-180-551 25 51 (12ct/min)

Email: HSE-DUS.service@hitachi-eu.com

HITACHI EUROPE S.A.

Gran Via Carlos III, 101-1

08028 Barcelona

SPAIN

Tel: 93 409 2550

Fax: 93 491 3513

Email: atencion.cliente@hitachi-eu.com

HITACHI EUROPE srl

Via Tommaso Gulli N.39, 20147

Milano, Italia

ITALY

Tel: +39 02 487861

Tel: +39 02 38073415 Servizio Clienti

Fax: +39 02 48786381/2

Email: customerservice.italy@hitachi-eu.com

HITACHI Europe AB

Box 77 S-164 94 Kista

SWEDEN

Tel: +46 (0) 8 562 711 00

Fax: +46 (0) 8 562 711 13

Email: csgswe@hitachi-eu.com

HITACHI EUROPE S.A.S

Lyon Office

B.P. 45, 69671 BRON CEDEX

FRANCE

Tel: 04 72 14 29 70

Fax: 04 72 14 29 99

Email: france.consommateur@hitachi-eu.com

HITACHI EUROPE LTD (Norway) AB

STRANDVEIEN 18

1366 Lysaker

NORWAY

Tel: 67 5190 30

Fax: 67 5190 32

Email: csgnor@hitachi-eu.com

HITACH EUROPE AB

Egebækgård

Egebækvej 98

DK-2850 Nærum

DENMARK

Tel: +45 43 43 6050

Fax: +45 43 60 51

Email: csgnor@hitachi-eu.com

HITACHI EUROPE AB

Neopoli / Niemenkatu 73

FIN-15140 Lahti

FINLAND

Tel : +358 3 8858 271

Fax: +358 3 8858 272

Email: csgnor@hitachi-eu.com

Hitachi Europe Ltd

Bergensesteenweg 421

1600 Sint-Pieters-Leeuw

BELGIUM

Tel: +32 2 363 99 01

Fax: +32 2 363 99 00

Email:sofie.van.bom@hitachi-eu.com

HITACHI EUROPE LTD

Na Sychrove 975/8

101 27 Praha 10 –Bohdalec

CZECH REPUBLIC

Tel: +420 267 212 383

Fax: +420 267 212 385

Email:csgnor@hitachi-eu.com

www.hitachidigitalmedia.com

Andere Hitachi Staubsauger Handbücher

Hitachi

Hitachi CVSF8BS Bedienungsanleitung

Hitachi

Hitachi CV-975FC Bedienungsanleitung

Hitachi

Hitachi R 7D Bedienungsanleitung

Hitachi

Hitachi CV-400PRO Bedienungsanleitung

Hitachi

Hitachi CV-SJ21V Bedienungsanleitung

Hitachi

Hitachi CV-100 Betriebsanleitung

Hitachi

Hitachi R 7D Bedienungsanleitung

Hitachi

Hitachi CV-770D Bedienungsanleitung

Hitachi

Hitachi RP 350YDM Bedienungsanleitung

Hitachi

Hitachi PV-XEH900 Bedienungsanleitung

Hitachi

Hitachi CV-90CY Betriebsanleitung

Hitachi

Hitachi CV-930F Bedienungsanleitung

Hitachi

Hitachi RP 350YDH Bedienungsanleitung

Hitachi

Hitachi CV-SC230V Betriebsanleitung

Hitachi

Hitachi CV-S880 Bedienungsanleitung

Hitachi

Hitachi R 18DL Fehlerbehebungshandbuch

Hitachi

Hitachi PV-XL300J Bedienungsanleitung

Hitachi

Hitachi CV-90CY Bedienungsanleitung

Hitachi

Hitachi PV-XC500 Bedienungsanleitung

Hitachi

Hitachi CV-BH18 Bedienungsanleitung

Hitachi

Hitachi CV-300 Betriebsanleitung

Hitachi

Hitachi R 14DL Bedienungsanleitung

Hitachi

Hitachi PV-X100N Bedienungsanleitung

Hitachi

Hitachi PV-XH850M Bedienungsanleitung

Beliebte Staubsauger Handbücher anderer Marken

Bissell

Bissell LittleGreen Proheat 1425 Series Bedienungsanleitung

Panasonic

Panasonic MC-YL637S147-AE Bedienungsanleitung

NEFF

NEFF N17XH10 0 Series Bedienungsanleitung

LG A9 Series Bedienungsanleitung

Oreck

Oreck Cordless Captura BK51700 Series Bedienungsanleitung

Kogan

Kogan KAVACROBVWA Bedienungsanleitung

Kränzle

Kränzle VENTOS 50 ID Benutzerhandbuch

EVVO

EVVO Ai35 Bedienungsanleitung

DeWalt

DeWalt DWH200D Bedienungsanleitung

Pontec

Pontec Pondomatic Vacuum Cleaner Bedienungsanleitung

Cleanmaxx

Cleanmaxx PC-P007E Bedienungsanleitung

Exido

Exido 240-114 Bedienungsanleitung

RIDGID

RIDGID WD1685AU0 Bedienungsanleitung

Ezviz

Ezviz RE4P Bedienungsanleitung

STG global

STG global TANVAC HDV3000 Bedienungsanleitung

Shark

Shark ROTATOR PRO COMPLETE NV550 Series Bedienungsanleitung

Factory

Factory M3340 Bedienungsanleitung

Shop-Vac

Shop-Vac VN92 SERIES Bedienungsanleitung