Honeywell BendixKing KN 62A Bedienungsanleitung

INSTALLATION MANUAL

KN 62/62A/64

DISTANCE MEASURING

EQUIPMENT

MANUAL NUMBER 006-00144-0007

REVISION 7 November, 2004

WARNING

Prior to the export of this document, review for export license requirement is needed.

REPRODUCTION OF THIS PUBLICATION OR ANY PORTION THEREOF BY ANY MEANS

WITHOUT THE EXPRESS WRITTEN PERMISSION OF HONEYWELL IS PROHIBITED,

EXCEPT TO THE EXTENT REQUIRED FOR INSTALLATION OR MAINTENANCE OF THE

RECIPIENT'S EQUIPMENT. FOR FURTHER INFORMATION CONTACT THE MANAGER,

TECHNICAL PUBLICATIONS, HONEYWELL, ONE TECHNOLOGY CENTER, 23500 WEST

105TH STREET OLATHE KS 66061 TELEPHONE: (913) 782-0400.

BENDIX/KING KN 62/62A/64

Rev 7, November/2004 00144I06.TDC Page R-1

REVISION HISTORY

KN 62/62A/64 Installation Manual

Part Number: 006-00144-0007

For each revision, Add, delete or replace pages as indicated.

REVISION: 7, November, 2004

ITEM ACTION

All pages Remove and Replace

BENDIX/KING KN 62/62A/64

Rev 7, November/2004 00144I06.TDC Page R-2

THIS PAGE RESERVED

BENDIX/KING KN 62/62A/64

Rev 7, November/2004 00144I06.TDC Page TOC-1

SECTION I

GENERAL INFORMATION

1.1 INTRODUCTION..........................................................................................1-1

1.2 EQUIPMENT DESCRIPTION......................................................................1-1

1.3 TECHNICAL CHARACTERISTIC ................................................................1-1

1.3.1 DME CHANNEL SOURCES........................................................................1-3

1.3.2 UNIT RESONANT FREQUENCY................................................................1-5

1.4 UNITS AND ACCESSORIES.......................................................................1-5

1.4.1 KN 62 DME..................................................................................................1-5

1.4.2 KN62A..........................................................................................................1-5

1.4.3 KN 64 DME..................................................................................................1-5

1.4.4 KN 62/62A/64 INSTALLATION KIT ..............................................................1-6

1.5 LICENSE REQUIREMENTS........................................................................1-6

SECTION II

INSTALLATION

2.1 GENERAL INFORMATION..........................................................................2-1

2.1.1 KN 62A.........................................................................................................2-1

2.1.2 KN 62 AND KN 64........................................................................................2-1

2.2 UNPACKING AND INSPECTING EQUIPMENT ..........................................2-1

2.3 EQUIPMENT INSTALLATION......................................................................2-1

2.3.1 AVIONICS COOLING REQUIREMENTS FOR PANEL

MOUNTED EQUIPMENT.............................................................................2-1

2.3.2 KN 62/62A/64 INSTALLATION.....................................................................2-2

2.3.3 MOLEX CONNECTOR ASSEMBLY.............................................................2-3

2.3.4 DME ANTENNA INSTALLATION.................................................................2-3

SECTION III

OPERATION

3.1 GENERAL....................................................................................................3-1

BENDIX/KING KN 62/62A/64

Rev 7, November/2004 00144I06.TDC Page TOC-2

LIST OF FIGURES

FIGURE 1-1 KN 62/62A/64 CRITICAL FREQUENCIES....................................1-5

FIGURE 2-1 MOLEX TERMINALS AND TOOLS...............................................2-5

FIGURE 2-2 KN 62/62A/64 PIN FUNCTION .....................................................2-8

FIGURE 2-3 ANTENNA CABLE ASSEMBLY.....................................................2-11

FIGURE 2-4 KN 62/62A/64 INTERCONNECT ..................................................2-13

FIGURE 2-5 KN 62/62A/64 TONARCO NAV122 INTERCONNECT ...............2-15

FIGURE 2-6 DUAL SLIP CODE CONTROL UNIT INTERCONNECT ...............2-17

FIGURE 2-7 DUAL BCD CONTROL UNIT INTERCONNECT...........................2-19

FIGURE 2-8 DUAL 2X5 CONTROL UNIT INTERCONNECT............................2-21

FIGURE 2-9 SLIP CODE AND 2X5 CONTROL UNIT INTERCONNECT..........2-23

FIGURE 2-10 SLIP CODE AND BCD CONTROL UNIT INTERCONNECT.........2-25

FIGURE 2-11 2X5 AND BCD CONTROL UNIT INTERCONNECT .....................2-27

FIGURE 2-12 NAV1 - NAV 2 CHANNELING OF A KN 62/62A/64 FROM

2 KX 155/165’S .............................................................................2-29

FIGURE 2-13 KN 62/62A/64 OUTLINE AND MOUNTING DRAWING................2-31

FIGURE 2-14 KN 62/62A/64 INSTALLATION DRAWING....................................2-33

FIGURE 2-15 KN 62/62A/64 INSTALLATION DRAWING....................................2-35

FIGURE 2-16 KN 60 ANTENNA INSTALLATION DRAWING ..............................2-37

FIGURE 2-17 KN 61 ANTENNA INSTALLATION DRAWING ..............................2-39

FIGURE 2-18 030-00005-0000 CONNECTOR ASSEMBLY................................2-43

FIGURE 3-1 KN 62/62A/64 FREQUENCY MODE.............................................3-2

FIGURE 3-2 KN 62/62A/64 GROUND SPEED/TIME-TO-STATION MODE.......3-2

FIGURE 3-3 KN 62/62A/64 REMOTE MODE....................................................3-3

BENDIX/KING KN 62/62A/64

Rev 7, November/2004 00144I06.TDC Page TOC-3

LIST OF TABLES

TABLE 1-1 SHIFTED BCD DME CHANNELING CODES...............................1-3

TABLE 1-2 2X5 DME CHANNELING CODES.................................................1-4

TABLE 1-3 SLIP CODE DME CHANNELING CODES....................................1-4

TABLE 1-4 KN 62/62A/64 INSTALLATION KIT................................................1-6

TABLE 2-1 KN 62/62A/64 PIN FUNCTION LIST.............................................2-9

BENDIX/KING KN 62/62A/64

Rev 7, November/2004 00144I06.TDC Page TOC-4

BENDIX/KING KN 62/62A/64

Rev 7, November/2004 00144I06.TDC Page 1-1

SECTION I

GENERAL INFORMATION

1.1 INTRODUCTION

This manual contains information relative to the physical, mechanical, and electrical characteris-

tics and installation procedures for the KN 62/62A/64 DME. The KN 64 has lower output power

than the KN 62/62A. The KN 64 is not TSO’ed.

1.2 EQUIPMENT DESCRIPTION

The KN 62/62A/64 is a panel mounted, 200 channel DME employing the latest state of the art sol-

id-state transmitter and large scale integrated circuit (LSI) technology. All tuning is done electron-

ically using a single crystal, digital, frequency synthesizer. The unit has a gas discharge display

that simultaneously indicates range, speed, and time-to-station or range and frequency. An auto-

matic dimming circuit adjusts the brightness of the display to compensate for changes in ambient

light level.

Range, speed, and time-to-station are measured digitally, using two LSI,s. Two other LSI circuits

are employed in the digital frequency synthesizer and display circuitry.

The KN 62/62A/64 can be channeled internally using its own frequency selection knobs or exter-

nally from any of the common NAV receiver codes.

The KN 62/62A/64 is an extremely compact DME requiring only 1.3 inches of panel height. It can

be operated with any DC input from 11 to 33 volts. Power consumption is only 15 watts at any

input voltage; thus, forced air cooling is not required.

1.3 TECHNICAL CHARACTERISTICS

SPECIFICATION CHARACTERISTIC

TSO COMPLIANCE (KN 62A only): F.A.A. TSO C66a

KA 60 Antenna: FAA TSO C66a and TSO C74c

KA 61 Antenna: FAA TSO C66c, C74c, C112, C118, C147

RTCA DO-160 Environmental

Categories

KA 61: [D2X]ACB[SCMYL,RG]XRFXX-

SXXXXXXX[XXXX][2A]AX

CHANNELS: 200 channels

ELECTRICAL: A. All solid state transmitter

B. Electronically tuned by single crystal, digital,

frequency synthesizer

C. Range, speed, and time-to-station measured

digitally, using large scale integrated circuits

BENDIX/KING KN 62/62A/64

Rev 7, November/2004 00144I06.TDC Page 1-2

NOTE

*THE MAXIMUM RANGE AT WHICH THE DME

WILL LOCK UP IS DETERMINED BY ALTITUDE

AND GROUND STATION OUTPUT POWER AND

SENSITIVITY.

SPECIFICATION CHARACTERISTIC

D. Gas discharge display

OUTPUT POWER: 50 watts peak, pulsed power minimum (35 watts,

KN 64)

100 watts nominal (50 watts, KN 64)

MAXIMUM DISPLAY RANGE:* 389 nautical miles

PANEL HEIGHT: 1.3 inches (3.30 cm) maximum

ACQUISITION SENSITIVITY: -82dBm minimum, -87dBm nominal

(-78dBm minimum, -87dBm nominal, KN 64)

SPECIFICATION CHARACTERISTIC

RANGE ACCURACY:*

±.1 NAUTICAL MILES OR ±.14%, WHICH-

EVER IS GREATER, FROM 0 TO 99.9 NAU-

TICAL MILES

±1 NAUTICAL MILE FROM 100 TO 389

NAUTICAL MILES

GROUND SPEED ACCURACY:

±1 KNOT OR ±1%, WHICHEVER IS

GREATER FROM 0 TO 999 KNOTS

TIME-TO-STATION ACCURACY: ±1 MINUTEFROM 0 TO 99 MINUTES

SEARCH TIME: 1.0 second nominal

MEMORY TIME: 11 to 15 seconds

AUDIO OUTPUT (IDENT): Level adjustable up to 15mW INTO 600 OHM

LOAD, nominally set for 2mW

MAXIMUM ALTITUDE: 50,000 feet

KN 62/62A/64 OVERALL DIMENSIONS (in-

cluding mounting rack and connectors)

LENGTH 12.258 INCHES (31.135 cm)

WIDTH: 6.312 inches (16.032 cm)

HEIGHT: 1.300 inches ( 3.302 cm)

WEIGHT: 2.6 LBS (1.18 KG) nominal

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Honeywell Messgerät Handbücher

Honeywell

Honeywell Bendix/King KN 63 Bedienungsanleitung

Honeywell

Honeywell Envitec MySignO Bedienungsanleitung

Honeywell

Honeywell EK205 Bedienungsanleitung

Honeywell

Honeywell Sensepoint XCD RTD Bedienungsanleitung

Honeywell

Honeywell BW RigRat Bedienungsanleitung

Honeywell

Honeywell VERSAFLOW SONIC 2000 Beilage

Honeywell

Honeywell HEN04112 Bedienungsanleitung

Honeywell

Honeywell Touchpoint Plus Bedienungsanleitung

Honeywell

Honeywell VERSAFLOW VORTEX 200 Verdrahtungsschema

Honeywell

Honeywell H Series Bedienungsanleitung

Honeywell

Honeywell ERX 350 Bedienungsanleitung

Honeywell

Honeywell Minitrend QX Bedienungsanleitung

Honeywell

Honeywell HG4930 Bedienungsanleitung

Honeywell

Honeywell AD1200-CT Bedienungsanleitung

Honeywell

Honeywell Vertex M Bedienungsanleitung

Honeywell

Honeywell TWM 9000 Verdrahtungsschema

Honeywell

Honeywell 854 ATG Series Bedienungsanleitung

Honeywell

Honeywell RABO Bedienungsanleitung

Honeywell

Honeywell NK Bedienungsanleitung

Honeywell

Honeywell UDA2182 Installationsanleitung

Honeywell

Honeywell Q4000 Bedienungsanleitung

Honeywell

Honeywell DR Graphic Bedienungsanleitung

Honeywell

Honeywell VERTEX C Bedienungsanleitung

Honeywell

Honeywell RMA 3000 Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

ELMETRON

ELMETRON CP-511 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

EXFO

EXFO FTB-2 Bedienungs- und Wartungshandbuch

Keysight

Keysight M8290A Bedienungsanleitung

ADTEK

ADTEK MW-5 Bedienungsanleitung