Honeywell DR4300 Series Leitfaden

44-45-33-60B Page 1 of 4

Models DR4200, DR4300, and

DR4500 Recorders

Replacement Instruction

Chart Hub Kit (30756150-501)

Document Number Form: 44-45-33-60B

Effective: 7/00

Supersedes: 3/99

Kit Contents This Chart Hub Replacement Kit contains the following parts:

Description Quantity

•Allen wrench 1, 5 mm 1

•Chart hub ass’y, tamper resist. 1

•Chart hub ass’y, large diam. 1

•Compression spring 1

•Chart hub ass’y, small diam. 1

Summary Enclosed is a new chart hub kit with parts required to replace the chart

hub in a DR4200, DR4300, or DR4500 recorder. Use the following

procedures, as appropriate, to replace the existing chart hub assembly.

WARNING Never access components inside the case, or remove or install

any connectors, with power applied.

Chart hub types Chart Hub Type Description How to intall

Hub used with ink pens and

preprinted charts when

approval bodies or process

inspectors require tamper

proof operation.

Slide hub down to

bottom of motor shaft

and tighten set screw.

Standard hub used on all

DR4500/DR4300/DR4200

recorders.

Push hub onto motor

shaft.

Hub used with ink pens and

preprinted charts that have a

small center hole.

Push hub onto motor

shaft.

Kit Instruction, continued

Page 2 of 4 44-45-33-60B

Component Location Refer to Figure 1 for the component locations and Table 1 for the

for DR4200/DR4300 installation procedure.

Screws 24240

Figure 1 – Component Location

DR4200/DR4300 Follow the procedure in Table 1 to replace the existing chart hub

Procedure assembly in your recorder.

Table 1 –

Chart Hub Assembly Replacement for DR4200/DR4300 Recorders

Step Action

1Open the chart door and swing the chart plate out.

2Remove chart hub (front of chart plate) and chart motor (rear

of chart plate) by removing screws. Save screws. Pull hub

off the motor.

3Select the chart hub from the kit that matches the one you

removed.

4Attach hub to motor. Refer to chart hub types on page 1.

5Hold motor in place and adjust chart hub flush with platen

and centered in platen opening.

6Re-install motor with screws. Ensure that chart hub rotates

freely and does not bind.

Kit Instruction, continued

44-45-33-60B Page 3 of 4

Component Location Refer to Figure 2 for the component locations and Table 2 for the

for DR4500 installation procedure.

Chart

Hub

Chart Motor

Spring

24241

Figure 2 –Component Location

DR4500 Procedure Follow the procedure in Table 2 to replace the existing chart hub in your

recorder.

Table 2 –Chart Hub Assembly Replacement for DR4500 Recorder

Step Action

1Open the chart door and swing the chart plate out.

2Remove chart hub and motor assembly by removing screws.

Save screws. Pull hub off the motor.

3Select the appropriate chart hub from the kit.

4For Classic models (DR45A1, DR45A2):

Assemble chart hub to chart motor—no spring is used. See

Chart hub types on page 1.

For Truline models (DR45AT, DR45AR, DR45AW, DR45AH,

DR45AP, DR45AS):

Slip new spring over chart motor shaft before pushing on the

chart hub assembly. See Chart hub types on page 1.

5Hold motor in place and adjust chart hub flush with platen

and centered in platen opening.

6Re-install motor with screws. Ensure that chart hub rotates

freely and does not bind.

Sensing and Control

Honeywell

11 West Spring Street

Freeport, IL 61032

44-45-33-60B 0700 Printed in USA www.honeywell.com/sensing

Warranty/Remedy

Honeywell warrants goods of its manufacture as being free of defective materials and faulty

workmanship. Contact your local sales office for warranty information. If warranted goods

are returned to Honeywell during the period of coverage, Honeywell will repair or replace

without charge those items it finds defective. The foregoing is Buyer’s sole remedy and is

in lieu of all other warranties, expressed or implied, including those of

merchantability and fitness for a particular purpose. Specifications may change

without notice. The information we supply is believed to be accurate and reliable as of this

printing. However, we assume no responsibility for its use.

While we provide application assistance personally, through our literature and the

Honeywell web site, it is up to the customer to determine the suitability of the product in

the application.

Andere Handbücher für DR4300 Series

Dieses Handbuch passt für folgende Modelle

Andere Honeywell Messgerät Handbücher

Honeywell

Honeywell AUTOCUBE 8200 Bedienungsanleitung

Honeywell

Honeywell MagneW 3000 Plus Benutzerhandbuch

Honeywell

Honeywell Enraf 977 Bedienungsanleitung

Honeywell

Honeywell MiniRAE 3000+ Bedienungsanleitung

Honeywell

Honeywell Themis alpha EI2 Bedienungs- und Wartungshandbuch

Honeywell

Honeywell Sensepoint XCL Bedienungsanleitung

Honeywell

Honeywell FE260 Bedienungsanleitung

Honeywell

Honeywell QX Bedienungsanleitung

Honeywell

Honeywell E-Mon KWH Bedienungsanleitung

Honeywell

Honeywell E3Point Bedienungsanleitung

Honeywell

Honeywell E-Mon Class 1000 Bedienungsanleitung

Honeywell

Honeywell Minitrend QX Bedienungsanleitung

Honeywell

Honeywell Minitrend Bedienungsanleitung

Honeywell

Honeywell SmartLine SLG 700 Bedienungsanleitung

Honeywell

Honeywell BW RigRat Bedienungsanleitung

Honeywell

Honeywell AC-250NXS Bedienungsanleitung

Honeywell

Honeywell AD1200-CT Bedienungsanleitung

Honeywell

Honeywell LeaderLine DPR 100 C Bedienungsanleitung

Honeywell

Honeywell SmartLine SLG 700 Bedienungsanleitung

Honeywell

Honeywell Versatilis Signal Scout Bedienungsanleitung

Honeywell

Honeywell Enraf FlexLine RMA805 Bedienungsanleitung

Honeywell

Honeywell APT4000PH Bedienungsanleitung

Honeywell

Honeywell Vertex M Bedienungsanleitung

Honeywell

Honeywell AC-250NXS Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

Keysight

Keysight M8290A Bedienungsanleitung

Acterna

Acterna MS1400 Bedienungsanleitung

R&S

R&S ZPH Bedienungsanleitung

Datacolor

Datacolor ColorReader DC10-2 Bedienungsanleitung