Honeywell E-Mon KWH Bedienungsanleitung

62-0417-02

OWNER’S MANUAL

Honeywell E-Mon®

MMU-Style Meters

KWH AND KWH/DEMAND

Honeywell E-Mon

715 Peachtree Street NE

Atlanta, GA 30308

customer.honeywell.com

62-0417_B.fm Page 1 Tuesday, May 8, 2018 1:35 PM

HONEYWELL E-MON® MMU-STYLE METERS

62-0417—02 2

Dear Valued Customer,

We are pleased that you chose to buy one of our products, and want you to be just

as pleased with owning it. Before installing your new Honeywell E-Mon product,

please read the information on the following pages carefully.

We believe that you will find the Honeywell E-Mon meters easy to install and to use

for monitoring and evaluating your electrical usage.

To be sure that you are 100% satisfied with your products, we provide toll-free

technical and sales support Monday through Friday, 8:00 am to 7:30 pm, EST:

(800) 334-3666. You may also reach us via email at [email protected].

If you have questions, we can handle them quickly and effectively with a telephone

call. Please let us try to help you BEFORE you remove your meter. And to help us

help you, we ask that you have all relevant information on hand when you call

(model or part numbers, nature of difficulty, etc.)

Be sure to forward this manual to the owner after installation is complete, so that

they may use it as a reference guide when reading the Honeywell E-Mon meter.

Thank you.

62-0417_B.fm Page 2 Tuesday, May 8, 2018 1:35 PM

HONEYWELL E-MON® MMU-STYLE METERS

3 62-0417—02

TABLE OF CONTENTS

Section 1.0 Safety Label Definitions and Information 4

Section 2.0 Precautionary and Safety Information 5

Section 3.0 Introduction to Multiple Meter Units (MMUs) 6

Section 3.1 Application 6

Section 3.2 General Description 6

Section 4.0 Description of Multiple Meter Units (MMUs) 7

Section 4.1 Class 1000/2000 Meters 7

Section 4.2 Class 3200 Meters 7

Section 4.3 Green Class Meters 7

Section 4.4 IDR (Interval Data Recorders) 7

Section 5.0 MMU Cabinet Installation 8

Section 5.1 MMU Cabinet Description 8

Section 5.2 MMU Cabinet Installation 8

Section 6.0 MMU Cabinet Wiring 10

Section 6.1 MMU Cabinet Wiring 10

Section 6.2 MMU Cabinet Wiring 11

Section 6.3 MMU Cabinet Wiring 11

Section 7.0 Individual Meter Wiring Diagrams and Installation

Procedures

Section 7.1 Class 1000, 2000, and Green Class Meter Wiring

Diagrams and Installation Procedures

Section 7.2 Class 3200 Meter Wiring Diagrams and Installation

Procedures

Section 7.3 IDR (Interval Data Recorders) Wiring Diagrams and

Installation Procedures

Section 7.4 Webmon Procedures 13

Appendix A System Wiring Guides 14

Appendix B System Wiring Guides 15

Appendix C Modern System Configuration Diagrams 16

Appendix D Hardwired System Configuration Diagrams 17

Appendix E Hardwired System Configuration Diagrams (Continued) 18

Section 8.0 Troubleshooting 19

Section 9.0 Meter Technical Specifications 19

Section 10.0 Meter Limited Warranty 20

62-0417_B.fm Page 3 Tuesday, May 8, 2018 1:35 PM

HONEYWELL E-MON® MMU-STYLE METERS

62-0417—02 4

1.0 SAFETY LABEL DEFINITIONS AND

INFORMATION

The MMU Style Meter may contain one or more of the following labels.

Operator(s) should familiarize themselves with the meaning of each label to

minimize risk.

The presence of this label is a cautionary indicator identifying a

danger risk. The manual should be consulted prior to proceeding.

The presence of this label indicates an electrical shock hazard

exists in the location or area where the label is placed. Prior to

proceeding, the MAINS power must be disconnected and the

manual consulted for safety information.

62-0417_B.fm Page 4 Tuesday, May 8, 2018 1:35 PM

HONEYWELL E-MON® MMU-STYLE METERS

5 62-0417—02

2.0 PRECAUTIONARY AND SAFETY

INFORMATION

CAUTION

Internal circuit card components are extremely sensitive to

electrostatic discharge. Be careful not to touch internal circuitry prior

to discharging any static buildup on your person. To discharge yourself,

touch a grounded metal object such as conduit or an earth-grounded

metal enclosure.

CAUTION

High voltages present on main PCB terminal block TB1 screw

terminals. Risk of serious injury and/or electrical shock exists. Prior to

performing any wiring operations, review all contents of the user

manual and de-energize the MAINS power switch. Only qualified

personnel should perform installation wiring. Installation wiring must

comply with all local and national electrical codes.

CAUTION

Failure to ground the enclosure creates a possible shock hazard. Do not

operate the MMU Style Meter without a protective earth wire attached

securely to the PE terminal screw. After installing protective earth

wiring, secure the screw tightly (7 N-m torque.)

CAUTION

NEVER open front panel of unit while unit has MAINS power applied.

Failure to comply can increase the risk of serious injury and/or

electrical shock.

62-0417_B.fm Page 5 Tuesday, May 8, 2018 1:35 PM

HONEYWELL E-MON® MMU-STYLE METERS

62-0417—02 6

3.0 INTRODUCTION TO MULTIPLE METER

UNITS (MMU)

3.1 Application

This Install Manual describes a line of Multiple Meter Units (MMU) used in

monitoring electrical usage in commercial, industrial, or institutional facilities.

Voltage and current are continuously measured and updated to provide highly

accurate, true RMS power information via current sensors.

3.2 General Description

The MMU allows for compact installation of multiple meters that allows for easy

and centralized reading. A single MMU cabinet can be configured to contain up

to 8, 16, or 24 meters of different voltage configurations (i.e. 208V and 480V).

Fig. 1. MMU 8 Cabinet.

62-0417_B.fm Page 6 Tuesday, May 8, 2018 1:35 PM

HONEYWELL E-MON® MMU-STYLE METERS

7 62-0417—02

4.0 DESCRIPTION OF MULTIPLE METER

UNITS (MMU)

MMU cabinets can be used to house Class 1000, Class 2000, Class 3200 and

Green Class meters. IDR’s, (Interval Data Recorders) can also be installed in the

MMU cabinets with the meters.

These units are briefly described below:

4.1 Class 1000/2000 Meters

The Class 1000 and Class 2000 meters are power meters for use in sub metering

applications. The devices take inputs from current sensors and the line voltage

and output kW hours in pulses.

Refer to Sections 5, 6, &7 for general installation instructions on installing Class

1000 or Class 2000 meters into a MMU Cabinet.

4.2 Class 3200 Meters

The Class 3200 meter is a 3-element meter with communication. The device is

used to monitor electric power usage after the utility meter and store kW and

kVAR data for automatic meter reading.

Refer to Sections 5, 6, &7 for general installation instructions on installing Class

3200 meters into a MMU Cabinet.

4.3 Green Class Meters

The Green Class Meter is a power meter for use in sub metering applications. The

devices take inputs from current sensors and the line voltage and output kW

hours in pulses.

Refer to Sections 5, 6, &7 for general installation instructions on installing Class

3200 meters into a MMU Cabinet.

4.4 IDR (Interval Data Recorders)

The Interval Data Recorder (IDR) is an energy data collection device with

communication. The device is used to count digital pulses of the utility meter and

store data for automatic meter reading. Various communications types are

provided, EZ7, Modbus RTU, Modbus TCP/IP, BACnet MS/TP, BACnet IP, and

Lonworks TP/FT-10.

Refer to Sections 5, 6, &7 for general installation instructions on installing IDR

meters into a MMU Cabinet.

62-0417_B.fm Page 7 Tuesday, May 8, 2018 1:35 PM

HONEYWELL E-MON® MMU-STYLE METERS

62-0417—02 8

5.0 MMU CABINET INSTALLATION

5.1 MMU Cabinet Description

The MMU Cabinet is made from 14 or 16 gauge steel. The cabinet has an ANSI 61

gray exterior finish. It contains a seam that is continuously welded and ground

smooth. The heavy gauge continuous hinge pin that connects the door and the

enclosure body are removable. There are screw-down clamps located on the door

for easy locking of the cabinet.

Fig. 2. Cabinet Dimensions.

5.2 MMU Cabinet Installation

The dimensions of the MMU8, MMU16, and MMU 24 cabinet are shown in Figure

The MMU cabinet shall be mounted in an upright orientation as shown in Figure

3. The MMU cabinet must only be installed by personnel with the proper electrical

licensing for the intended location.

Use appropriately sized mounting hardware to fasten the MMU enclosure to the

selected mounting surface. The four housing mounting holes are located on the

upper and lower mounting brackets.

Serviceability/field Repair Service and repair should be completed by qualified

personnel only. Meters cannot be calibrated in the field. Adjustment is limited to

reset of the meter display and should be performed by qualified personnel only.

The configuration is stated on each meter nameplate.

M33734

SIDE VIEWFRONT VIEW

(178)

3-3/8

(86)

(51) 7/16 (11)

DIA

1-1/4 (32)

3-3/8

(86)

DOOR

CLAMP

PADLOCKING

HASP

MMU

DIMENSIONS

IN INCHES AND (MM)

AB C

MMU8

MMU16

MMU24

24 (610)

30 (762)

12 (305)

20 (508)

24 (610)

1-1/4 (32)

3 (76)

MMU

METER

CONFIGURATION TA S K

METER

SPACES

ACROSS DOWN

MMU8

MMU16

MMU24

2 (51)

4 (102)

5 (127)

4 (102)

5 (127)

8 (203)

16 (406)

24 (610)

5/8

(16)

7/16

(11)

62-0417_B.fm Page 8 Tuesday, May 8, 2018 1:35 PM

HONEYWELL E-MON® MMU-STYLE METERS

9 62-0417—02

The MMU enclosure is not supplied with knockouts. The installer will make the

necessary entrances to the enclosure to supply entry for the voltage and current

sensor conductors. The conduit and fittings must be appropriate for the

application and installed in a manner to meet national and local electrical codes.

Spaces not occupied by meters will have a blank metal cover over the display

window.

Fig. 3. Example of an 8 Meter MMU Enclosure.

62-0417_B.fm Page 9 Tuesday, May 8, 2018 1:35 PM

HONEYWELL E-MON® MMU-STYLE METERS

62-0417—02 10

6.0 MMU CABINET WIRING

6.1 General Wiring Instructions

Wiring of the individual MMU meters are the same as for a stand-alone meter.

See section 7.0.

Refer to the Individual Meter Installation Manual for individual meter wiring.

Fig. 4. MMU Terminal.

Some MMU units may come from the factory already pre-wired for the voltage to

the installed meters. When supplied this way, there will be a terminal block

located inside the MMU that is labeled A, B, C, N. See Figure 4. The letters refer to

the three phases and neutral connections already made to the meters. The power

only has to be landed on the terminal block in order to power all of the meters in

the MMU.

As with the stand-alone meters, the power wires must be fused. The size of the

fuse will be determined by the number of meters installed in the MMU. The

Littelfuse KLDR series are used for this component. Each meter point requires 1/

10 amp fusing. With 8 meters, a one amp fuse would be acceptable.

The current sensor wiring is installed by bringing in the leads from their source

and landing them on the appropriate terminals on the meter’s sensor input

terminals.

M33744

62-0417_B.fm Page 10 Tuesday, May 8, 2018 1:35 PM

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Honeywell Messgerät Handbücher

Honeywell

Honeywell HG4930 Bedienungsanleitung

Honeywell

Honeywell TS34C Bedienungsanleitung

Honeywell

Honeywell DR 4300 Leitfaden

Honeywell

Honeywell HAQ Series Installationsanleitung

Honeywell

Honeywell 854 ATG Series Bedienungsanleitung

Honeywell

Honeywell IAQPoint2 Bedienungsanleitung

Honeywell

Honeywell SmartLine RMA800 Bedienungsanleitung

Honeywell

Honeywell MagneW 3000 Plus Benutzerhandbuch

Honeywell

Honeywell enCore Series Bedienungsanleitung

Honeywell

Honeywell 6108 Anleitung zur Verwendung

Honeywell

Honeywell Themis alpha EI2 Bedienungs- und Wartungshandbuch

Honeywell

Honeywell E-Mon Class 1000 Bedienungsanleitung

Honeywell

Honeywell HERMetic PRESS Bedienungsanleitung

Honeywell

Honeywell NOTIFIER UDS-3 Verdrahtungsschema

Honeywell

Honeywell Sensepoint XCL Bedienungsanleitung

Honeywell

Honeywell MiniRAE 3000+ Bedienungsanleitung

Honeywell

Honeywell 90DM4 Bedienungsanleitung

Honeywell

Honeywell Q209E Modutrol IV Bedienungsanleitung

Honeywell

Honeywell HERMetic UTImeter Gtex Chem Bedienungsanleitung

Honeywell

Honeywell GasLab Q2 Bedienungsanleitung

Honeywell

Honeywell HERMetic UTImeter Gtex Chem IIC Bedienungsanleitung

Honeywell

Honeywell AS302P Bedienungsanleitung

Honeywell

Honeywell HG1120 Bedienungsanleitung

Honeywell

Honeywell Minitrend Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

Keysight

Keysight M8290A Bedienungsanleitung

Acterna

Acterna MS1400 Bedienungsanleitung

R&S

R&S ZPH Bedienungsanleitung

Datacolor

Datacolor ColorReader DC10-2 Bedienungsanleitung