Honeywell 6108 Anleitung zur Verwendung

Models 6108, 6110

Read this manual carefully and never store it inside the safe!

ENGLISH

Operation & Installation Guide

DIGITAL STEEL SECURITY BOX

Welcome / Package Contents Product OverviewBefore Use / Set-up and

Operation (Step 1)Set-up and Operation (Step 2) / Closing and Locking

Model 6110-Attaching Security Cable NotesConsumer AssistanceOrdering

Additional Keys / Safe Identication RecordWarranty Information

For Your Protection

• Record all Safe Identication Numbers on Safe Identication

Record (page 9).

• Save this manual and NEVER keep it inside the safe.

Page 1

Page 2

Page 3

Page 4

Page 5

Page 6-7

Page 8

Page 9

Back

Cover

Index

The following list outlines the items and quantities of each included with your new safe. Please

carefully check the list to conrm all items have been received. If any items are missing, please

contact Consumer Assistance (See page 4 for contact information).

Digital Steel Security Box (1ea.)

Operation Manual (1 ea.)

Override Access Keys (2 ea.)

“AA” Batteries (4 ea.)

Your new Honeywell Digital Steel Security Box will provide years of secure protection for your

valuables, important documents and other personal items. All Honeywell Digital Steel Security Boxes

are designed and built using the highest manufacturing standards to ensure maximum user satisfaction

under a variety of conditions. Your Honeywell Digital Steel Security Box will provide “Peace of Mind” for

many years to come.

Thank you and enjoy!

Attention: DO NOT RETURN SAFE TO STORE

If you are missing parts or have diculty operating your safe, please contact our Consumer Assistance

Department by telephone. Store will not accept returned products without prior authorization. You must

rst contact our consumer assistance department (See page 8 for contact information).

WELCOME

PACKAGE CONTENTS

EXTERIOR

A - Emergency Key Cover

B - Open/Close Knob

C - Keypad

D - LED Indicator

E - Box Lid

F - Carry Handle

G - Box Body

INTERIOR

H - Box Lid

I - Battery Compartment

J - Reset Button

PRODUCT OVERVIEW

BCD

IH J

IMPORTANT - For your convenience, we have included 4 “AA” Batteries that provide the power for

the electronic keypad. These must be installed before using your box. If your safe is locked, you

may use the Emergency Key to open it. The starter batteries included with this product are for testing

purposes only and should be immediately replaced with new alkaline or lithium batteries. It is NOT

RECOMMENDED to use Non-alkaline or rechargeable batteries.

1. Remove the Black Emergency Key Cover. (Figure 1).

2. Insert the Emergency key and turn ¼ turn to the left (counterclockwise) (Figure 2).

3. Turn the Open/Close knob ¼ turn to the left (counterclockwise) and open the lid. (Figure 3).

4. Remove the Battery Compartment cover by pushing in and sliding down (Figure 4).

5. Install the batteries as pictured on the inside of the Battery compartment. Ensure the batteries are

installed in the correct direction, with regard to polarity (+ and -)

6. Once the batteries are properly installed, replace the battery compartment cover. Close lid and

return Knob & Key to “Locked” position and replace Emergency key cover.

Figure 1

Figure 3

Figure 2

NOTE: If batteries are removed or fail, the keypad memory will NOT be erased and the active

programmed code will still work once power has been restored.

Weak or dead batteries should be replaced immediately and all 4 batteries should be changed. To

replace the batteries please follow the instructions in the SETUP section. Remember to always remove

batteries from safe if not using for an extended period of time. If your batteries are completely dead

and you cannot open the safe by using the digital keypad, use the override access key to open safe

and access the battery compartment.

BEFORE USE

SETUP & OPERATION (STEP 1)

Open the box and reset passcode:

The preset factory user code is 3*.

1. Enter the factory preset code and you will see the LED light turn green (Figure 1).

2. Turn the Open/Close knob ¼ turn to the left (counterclockwise) and open the lid (Figure 2).

3. To program a new code, press the red reset button on the right side of the battery box.

The LED light will ash Orange (Figure 3).

4. Enter a new code (up to 5 digits), followed by the *key and repeat a second time.

Example: 1 - 2 - 3 - 4 - 5 -* / 1 - 2 - 3 - 4 - 5 -*.

After the rst set the LED will ash orange and after the second it will ash green indicating that you

have successfully reprogrammed the code.

Lock the safe:

Close the Lid and make sure that the Open/Close Knob is in the Locked position.

SETUP & OPERATION (STEP 2)

CLOSING AND LOCKING

Figure 1 Figure 3Figure 2

123

1. Remove plug from hole on the outer left side of the box

(Figure 1).

2. Wrap cable around object and back through looped end

(Figure 2).

3. Depress cable release button and hold down (Figure 3).

4. Insert security cable into the hole and release button.

(Figure 4).

Figure 1

Figure 2

Figure 3

Figure 4

MODEL 6110 - ATTACHING SECURITY CABLE

NOTES

EMAIL: [email protected]

WEBSITE: www.honeywellsafes.com

ADDRESS: Consumer Assistance Dept.

LH Licensed Products, Inc. 860 East Sandhill Avenue Carson, CA 90746 USA

TELEPHONE: US/Canada 1-877-354-5457 (Toll Free)

Mexico 01-800-288-2872 After English voice recording stops you must then enter 800-860-1677

to complete your call. (Toll Free)

Australia 0011-800-5325-7000 (Toll Free)

Germany/New Zealand 00-800-5325-7000 (Toll Free)

Other Countries XX*-310-323-5722 (Toll Charges Apply)

XX*- Dial U.S. Country Code rst

CALL CENTER HOURS: US/Canada 7am – 5pm (PST**) Mon – Fri (Subject to change)

CALL BACK HOURS: Other Countries 7am – 8pm (PST**) Mon – Fri (Subject to change)

PST**- Local time in Los Angeles, CA, USA

INTERNATIONAL CALL BACK HOURS:

If you need to speak with a consumer assistant and cannot contact us during the Call

Center hours above, please send an email or leave a telephone message, including your Name,

Telephone Number and the best time for us to contact you during the Call Back hours above and we

will make every eort to contact you and help answer any of your questions or concerns.

* Insert correct Country Code

** Local Time based on Los Angles California USA

CONSUMER ASSISTANCE

Andere Handbücher für 6108

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Honeywell Messgerät Handbücher

Honeywell

Honeywell FlexLine SmartServo 954 Bedienungsanleitung

Honeywell

Honeywell W8710A Bedienungsanleitung

Honeywell

Honeywell VERSAFLOW VORTEX 200 Verdrahtungsschema

Honeywell

Honeywell Class 320 Meter Bedienungsanleitung

Honeywell

Honeywell S7751A Bedienungsanleitung

Honeywell

Honeywell AD1200-CT Bedienungsanleitung

Honeywell

Honeywell TMS 9250 Bedienungsanleitung

Honeywell

Honeywell DR 4300 Leitfaden

Honeywell

Honeywell RMA300-ME Bedienungsanleitung

Honeywell

Honeywell SEARCHLINE EXCEL PLUS Bedienungsanleitung

Honeywell

Honeywell VERTEX C Bedienungsanleitung

Honeywell

Honeywell VERSAFLOW MAG 200 Bedienungsanleitung

Honeywell

Honeywell Minitrend QX Bedienungsanleitung

Honeywell

Honeywell APT4000PH Bedienungsanleitung

Honeywell

Honeywell BK-G1.6A Bedienungsanleitung

Honeywell

Honeywell E-Mon Anleitung zur Verwendung

Honeywell

Honeywell HPB Bedienungsanleitung

Honeywell

Honeywell 3400 Bedienungsanleitung

Honeywell

Honeywell Bendix/King KN 63 Bedienungsanleitung

Honeywell

Honeywell 04973 Series Handbuch

Honeywell

Honeywell 854 ATG Series Bedienungsanleitung

Honeywell

Honeywell VERSAFLOW VORTEX 200 Bedienungsanleitung

Honeywell

Honeywell enCore FC Series Bedienungsanleitung

Honeywell

Honeywell SmartLine SLG 700 Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

Keysight

Keysight M8290A Bedienungsanleitung

Acterna

Acterna MS1400 Bedienungsanleitung

R&S

R&S ZPH Bedienungsanleitung

Datacolor

Datacolor ColorReader DC10-2 Bedienungsanleitung