Honeywell COMBISAFE SkyReach 8100 Bedienungsanleitung

8100 SkyReach Anchor

USER INSTRUCTIONS

0158 - EN 795:2012-B

CONTENTS

General 3

Quick Guide 4

Safety instructions 5

Technical data 9

SkyReach Anchor 9

Personal Fall Protection Equipment 12

Attachments 14

Optional items 18

Attachment installation 20

Cast-In Sleeve installation 20

Steel Flange Clamp installation 24

Assembly 29

Installation by hand 29

Installation by crane 32

Dismantling 36

Working procedure 37

Changing the anchor point 42

Maintenance 43

Safety check before initial use 43

Cleaning 45

Storage 45

Recycling 45

UI 8100-EN-2027.

Subject to changes.

SkyReach Anchor Safety instructions

General

The SkyReach Anchor is a product that has been designed to

prevent falls from heights, mainly during all work associated with

decking for horizontal formwork operations. Together with speciﬁc

attachments and certiﬁed Personal Fall Protection Equipment

(PFPE) it will create a personal fall protection system which

contributes to a safe workplace.

The SkyReach Anchor is also compatible to use with the

COMBISAFE Loading System MkII, which allows you to load and

unload ﬂatbed vehicles in a safe manner.

The SkyReach Anchor is 3,1 metres high and the anchor boom is

2 metres long which allows the system to cover a working radius

of up to 8.5 metres and gives access to a surface area of close to

230 m2when used in conjunction with a Falcon 6.2 m retractable

fall arrest block. Due to the lightweight design of the SkyReach

Anchor, it can be manoeuvred and installed by a single person,

and it can also be moved by crane if that is preferred.

The SkyReach Anchor is tested to comply with

EN 795:2012 Type B standard, and is CE-certiﬁed by DEKRA

Testing and Certiﬁaction GmbH, Dinnendahlstraße 9, 44809

Bochum, Germany, with identiﬁcation nr 0158.

Read carefully through this user instruction before using the

product. In case of questions and uncertainties, please contact

Combisafe for support.

Safety instructions SkyReach Anchor

Quick Guide

EN 795:2012 Type B

# 8100 # 8200

SkyReach Anchor Safety instructions

Safety instructions

The SkyReach Anchor is intended for the purpose stated in this

user instruction only, any other use is not allowed. The SkyReach

Anchor is a personal fall protection anchor device, used to

protect workers operating at height. If used incorrectly there is

a potential risk of accidents to both the user and other people in

the vicinity. Please read this manual carefully before use.

• Under no circumstances may the product be used as a makeshift

crane or lifting/lowering device.

• Under no circumstances may any item other than those provided with

the system be used either in replacement or through choice as this

may affect the performance of the product.

• Care should be taken in the transportation of the product between

locations. If any damage is found on any part, the item must be

withdrawn from use, inspected by a trained person and replaced if

required.

• Care should be taken while installing the product and if any damage

occurs or is found on any part, the item must be withdrawn from use,

inspected by a trained person and replaced if required.

• The site location where the SkyReach Anchor is being used must have

a rescue plan in place, in the event of a fall arrest incident.

• The device is designed for use by one person at a time only. Under no

circumstances may multiple persons be attached to the device.

• If a crane is used as lifting device, be aware of the movements made

by the crane and keep workers at a safe distance.

• The SkyReach Anchor is designed to be used within a zero factor fall

arrest system. Make sure that the anchorage is always overhead and

the self- retracting lifeline is taut between the anchorage point and

the worker.

• The maximum vertical deﬂection of the anchor point that can occur

during service is 0,7 m.

• In case that SkyReach Anchor is re-sold outside the original country

of destination, it is essential that the reseller provides user instruc-

tions in the language of the country in which the system is to be used.

• When referring to included components not produced by Combisafe,

please refer to the speciﬁc user guide / manual for that speciﬁc item.

Safety instructions SkyReach Anchor

• When using a retractable fall arrest block, the certiﬁcation of this

product is only valid when the prescribed block is used, hence it is

tested and approved in combination with the SkyReach Anchor.

• PFPE that is used together with the SkyReach Anchor must be

CE-certiﬁed and approved in the speciﬁc country of use.

• It is forbidden to use the products stated in this user instruction if

pregnant, suffering from cardiovascular disease, affected by alcohol

or drugs or other health issues that might affect your mental or physi-

cal capacity.

Always check products and equipment before use

Check all component parts of the SkyReach Anchor before

assembly. Never use damaged or rusty parts, as this can affect

safety. Refer to the check list in the Maintenance chapter which

must be followed prior to use.

Never combine products

It is not recommended to install, combine or interconnect products

other than those supplied by Combisafe. Combisafe product

liability is limited to correctly installed Combisafe products only.

Always use Personal Fall Protection Equipment

Personal Fall Protection Equipment (PFPE) must always be worn

during assembly and dismantling when a risk of falling exists,

see Figure 1. This also applies to work carried out from MEWPs

(Mobile Elevating Working Platforms).

Figure 1. Personal Fall Protection Equipment

SkyReach Anchor Safety instructions

Fall clearance

Note that it is necessary that enough free distance is veriﬁed to

closest underlying object, see Figure 2 below.

A+B

Figure 2. Explanation of fall clearance

A: 0,7 [m] Vertical deﬂection of the SkyReach Anchor Point

B: X Braking distance of the PFPE. Please refer to the

manufacturer’s user instructions for speciﬁc value.

C: 1 [m] Safety distance.

Total required fall clearance = A+B+C

Safety instructions SkyReach Anchor

Periodic inspection/inspection after a fall

To ensure the function and safety of the components, a safety

inspection of the SkyReach Anchor, the attachments and the

PFPE, needs to be done by a competent person at least once

every 12 months. The inspections must be documented into a

component record.

If an accident has occurred, e.g. a person has fallen, the items must

be immediately withdrawn from use and inspected by a competent

person according to the manufacturer’s safety check.

Please contact Combisafe for more information regarding

inspections and associated documentation.

NOTE

The SkyReach Anchor is designed to deform if a fall occurs, to

absorb the energy and reduce the arising forces. When tested,

the maximum vertical deﬂection of the anchor point is 0,7 m.

Rescue

If there is a need to rescue a person that has fallen, the

SkyReach Anchor can provide help by using a SafEscape Elite

(Part No. CM1028770) and Webbing Anchorage Sling (Part

No. CM1002918). By looping the sling round the lower section

of the mast of the SkyReach Anchor, a rescue operation can be

performed. It is not allowed to connect the SafEscape to the

anchor point of the SkyReach Anchor. Remember that a rescue

operation can only be performed by a person that has been trained

to use the SafEscape. Thus, no rescue method can be described

in this User Instruction. The operation needs to be planned by the

Safety Manager at the site and evaluated to the actual case with a

separate risk analysis.

Remember

• Plan the fall prevention at an early stage, this will beneﬁt everyone.

• Use only safety-checked products.

• Restrict access below and around the installation and working area to

prevent injury to others from any fall hazard.

• Use tools designed for the type of work to be carried out.

• Keep the installation area in order.

• A safe workplace is a good workplace.

• Many fall accidents occur from a low height.

SkyReach Anchor Technical data

Technical data

SkyReach Anchor

The SkyReach Anchor is designed to be a lightweight product and

is easily foldable for moving and conﬁgured to be space-saving

when transporting or storing the item, see Figure 3. To secure both

positions (assembled mode and folded mode) the attached Lock

Pin is used. Due to the lightweight design of the SkyReach Anchor

it can be installed by a single person.

Incorporated to the SkyReach Anchor there are two pieces of 2 m

Endless Webbing Sling (100605) which allows the product to be

lifted by crane if needed. For this purpose there are two lifting eyes

on SkyReach.

Material: Hot-dip galvanised/painted steel

Weight: 25 kg

Height: 3,1 m

Assembled width: 2,0 m

Packed width: 0,2 m

2,0 m

3,1 m

0,14 m

Figure 3. SkyReach Anchor in assembled mode and folded mode

Technical data SkyReach Anchor

SkyReach Anchor Labels and Markings

Figure 4 below shows all the labels and markings of the SkyReach

Anchor.

The following ﬁgures (Figure 5, Figure 6 and Figure 7) are showing

these important elements.

Figure 4. Labels and markings on the SkyReach Anchor

1. ID Plate

2. Reﬂective Tape

3. Anti Slip Grip Tape

4. Insertion Marking Label

5. 5 x Reﬂective Tape

6. Combisafe Label

7. Anti Slip Grip Tape

8. Product Information Label

Inhaltsverzeichnis

Andere Honeywell Sicherheitsausrüstung Handbücher

Honeywell

Honeywell MILLER MIGHTEVAC 1014390-A Bedienerhandbuch

Honeywell

Honeywell Miller EN 795 Bedienungsanleitung

Honeywell

Honeywell FF-SYA14 Series Bedienungsanleitung

Honeywell

Honeywell SPACEL 3500 Bedienungsanleitung

Honeywell

Honeywell EBI XLS MASS NOTIFICATION SYSTEM Bedienungsanleitung

Honeywell

Honeywell SALISBURY ARC FLASH PROTECTIVE GARMENTS Bedienungsanleitung

Honeywell

Honeywell MFL/6FT Bedienerhandbuch

Honeywell

Honeywell BA300 Series Bedienungsanleitung

Honeywell

Honeywell Howard Leight VERISHIELD VS 321 Bedienungsanleitung

Honeywell

Honeywell HS-600 Bedienungs- und Montageanleitung

Honeywell

Honeywell Miller H-Design DuraFlex Bedienerhandbuch

Honeywell

Honeywell ESSIAN 2 Bedienungsanleitung

Honeywell

Honeywell Miller MLAS Bedienungsanleitung

Honeywell

Honeywell 15.112.816 Bedienerhandbuch

Honeywell

Honeywell MILLER TurboLite EXTREME MFLEC-3/6FT Bedienerhandbuch

Honeywell

Honeywell MaxLED 26m Bedienungsanleitung

Honeywell

Honeywell FF-SB14 Series Handbuch

Honeywell

Honeywell ExiLED Bedienungsanleitung

Honeywell

Honeywell Miller AirCore Series Bedienungsanleitung

Honeywell

Honeywell GENT S4-348 Series Gebrauchsanweisung

Honeywell

Honeywell MaxLED 26m Bedienungsanleitung

Honeywell

Honeywell MILLER GlideLoc Body Control I Bedienerhandbuch

Honeywell

Honeywell Miller TurboLite MFL Bedienerhandbuch

Honeywell

Honeywell Miller Soll Xenon Montageanleitung

Beliebte Sicherheitsausrüstung Handbücher anderer Marken

Innova

Innova Xtirpa Bedienungsanleitung

bolle SAFETY

bolle SAFETY B810 Bedienungsanleitung

SHENZHEN FANHAI SANJIANG ELECTRONICS

SHENZHEN FANHAI SANJIANG ELECTRONICS A9060T Bedienungsanleitung

Hiltron security

Hiltron security POWER8E Leitfaden

Hatco

Hatco B-950P Bedienungsanleitung

Sitec

Sitec TX MATIC Bedienungsanleitung

TEUFELBERGER

TEUFELBERGER GRIP 12 Bedienungsanleitung

MSA

MSA PremAire System Bedienungsanleitung

AMC

AMC 1022M Series Bedienungsanleitung

Trinity

Trinity CASS S3 Bedienungsanleitung

CMC

CMC Helitack HotSeat Bedienungsanleitung

Force

Force P-35 Bedienungsanleitung

ACM

ACM SAFETY D200 Produkthandbuch

ROCK

ROCK P-451 AS Bedienungsanleitung

Power first

Power first 2XYR7A Service-Handbuch

SCHUBERTH

SCHUBERTH SHP 28-C Bedienungsanleitung

Trango

Trango CINCH Bedienungsanleitung

GRIDMESH ANCHOR

GRIDMESH ANCHOR GA01 Bedienungsanleitung