Honeywell CENTRA LINE WEB-HMI4/C Bedienungsanleitung

WEB-HMI4/C, WEB-HMI7/C,

WEB-HMI7/CF, WEB-HMI10/CF,

WEB-HMI16/CF and

WEB-HMI21/CF User’s Manual (SW)

WEB-HMI4/C, WEB-HMI7/C, WEB-HMI7/CF, WEB-HMI10/CF, WEB-HMI16/CF AND WEB-HMI21/CF - USER'S MANUAL (SW)

EN2Z-1077GE51 R0621 2

This page intentionally left blank.

WEB-HMI4/C, WEB-HMI7/C, WEB-HMI7/CF, WEB-HMI10/CF, WEB-HMI16/CF AND WEB-HMI21/CF - USER'S MANUAL (SW)

3 EN2Z-1077GE51 R0621

CONTENTS

DOCUMENT PROCESS .........................................................................................................................................................4

TRADEMARKS.......................................................................................................................................................................4

Software License Advisory .................................................................................4

Trademark Information .......................................................................................4

FIRST AND QUICK START OF DEVICE................................................................................................................................5

First start of the device .......................................................................................5

Configuration of the web client ...........................................................................6

The Settings Page.........................................................................................6

Accessing the System Settings Screen .........................................................6

The Web Browser Settings............................................................................7

Configure the Network interface ....................................................................7

Finish Quick start...........................................................................................8

OPEN THE SYSTEM SETTINGS MENU................................................................................................................................9

Localisation ........................................................................................................9

System ...............................................................................................................10

Logs....................................................................................................................10

To download the log files:..............................................................................10

To view the log files:......................................................................................10

Date & Time .......................................................................................................11

Networks ............................................................................................................11

Services..............................................................................................................11

Management ......................................................................................................12

Display................................................................................................................12

Fonts ..................................................................................................................12

Install additional fonts....................................................................................12

To remove a custom font...............................................................................13

Authentication.....................................................................................................13

Restart................................................................................................................13

Web Browser......................................................................................................13

Exit .....................................................................................................................14

FACTORY RESET ..................................................................................................................................................................15

Create the recovery USB device ........................................................................15

Restore the device from USB.............................................................................15

WEB-HMI4/C, WEB-HMI7/C, WEB-HMI7/CF, WEB-HMI10/CF, WEB-HMI16/CF AND WEB-HMI21/CF - USER'S MANUAL (SW)

EN2Z-1077GE51 R0621 4

DOCUMENT PROCESS

Table 1. Document process

Version Updated Location Comments

ENG01 2021-05-25 -

- New Document

- New SKU numbers

- Removed “Resetting password”

- Removed “Touchscreen Calibration”

- Removed “Plugin” and changed screenshots.

- Modified “Certificate” and “Certificate’s

Parameters”

TRADEMARKS

Software License Advisory

The information contained in this document is provided for informational purposes

only. While efforts were made to verify the accuracy of the information contained in

this documentation, it is provided 'as is' without warranty of any kind.

Third-party brands and names are the property of their respective owners.

Microsoft®, Win32, Windows®, Windows XP, Windows Vista, Windows 7, Windows

8, Visual Studio are either registered trademarks or trademarks of the Microsoft

Corporation in the United States and other countries. Other products and company

names mentioned herein may be the trademarks of their respective owners.

The example companies, organizations, products, domain names, e-mail

addresses, logo, people, places, and events depicted herein are fictitious. No

association with any real company, organization, product, domain name, e-mail

address, logo, person, place or event is intended or should be inferred.

This document supports software that is proprietary to Honeywell GmbH, Honeywell

Control Systems Ltd. and/or to third party software vendors. Before software

delivery, the end user must execute a software license agreement that governs

software use. Software license agreement provisions include limiting use of the

software to equipment furnished, limiting copying, preserving confidentiality, and

prohibiting transfer to a third party. Disclosure, use, or reproduction beyond that

permitted in the license agreement is prohibited.

Trademark Information

CentraLine and 'close to you' are trademarks of Honeywell Inc.

BACnet and ASHRAE are registered trademarks of American Society of Heating,

Refrigerating and Air-Conditioning Engineers. Microsoft and Windows are registered

trademarks, and Windows Internet Explorer are trademarks of Microsoft

Corporation. Java and other Java-based names are trademarks of Sun

Microsystems Inc. and refer to Sun's family of Java-branded technologies. Mozilla

and Firefox are trademarks of the Mozilla Foundation. Echelon, LON, LonMark,

LonTalk, and LonWorks are registered trademarks of Echelon Corporation.

Tridium, JACE, Niagara Framework, NiagaraAX Framework, Sedona Framework,

and Vykon are registered trademarks, and Workbench, WorkPlaceAX, and

AXSupervisor are trademarks of Tridium Inc. All other product names and services

mentioned in this publication that are known to be trademarks, registered

trademarks, or service marks are the property of their respective owners.

WEB-HMI4/C, WEB-HMI7/C, WEB-HMI7/CF, WEB-HMI10/CF, WEB-HMI16/CF AND WEB-HMI21/CF - USER'S MANUAL (SW)

5 EN2Z-1077GE51 R0621

FIRST AND QUICK START OF DEVICE

First start of the device

After starting up the device for the first time, you are located on the settings page.

Therefore, user need to login to the Setup menu to configure the device. By default,

the username and password are admin.

After entering the configuration menu for the first time, the user is forced to change

the admin password. This password must follow security requirements and must be

remembered all the time to be able to change the configuration of the device.

New password: _____________________________________________________

Confirm the new password in the Confirm Password box. Select Change Password.

The ‘admin’ password will be changed and the device will now reboot.

The new password will be required to change the configuration of the device.

IMPORTANT: DO NOT FORGET THE NEW PASSWORD. A forgotten

password cannot be cleared or reset. If you forget the ‘admin’ password,

contact CentraLine Technical Support.

Wait for the device to reboot and display the Login screen again.

Enter ‘admin’ in the Username box.

WEB-HMI4/C, WEB-HMI7/C, WEB-HMI7/CF, WEB-HMI10/CF, WEB-HMI16/CF AND WEB-HMI21/CF - USER'S MANUAL (SW)

EN2Z-1077GE51 R0621 6

Configuration of the web client

The Settings Page

The settings page is the default start page.

Enter your credentials to open the configuration menu or press Load Homepage on

the write top to access the configuration done in the web browser setup.

If you download a new application, you can force the panel to clear the cache.

Accessing the System Settings Screen

On the HTML5 web application, long press for 5 seconds on the top left corner of

the web panel touchscreen to open the settings page.

WEB-HMI4/C, WEB-HMI7/C, WEB-HMI7/CF, WEB-HMI10/CF, WEB-HMI16/CF AND WEB-HMI21/CF - USER'S MANUAL (SW)

7 EN2Z-1077GE51 R0621

The Web Browser Settings

After entering the configuration menu, you are forwarded to the Web Browser

configuration. To change the web Browser configuration, press the EDIT button on

the right top on the page.

Change the “on start” behavior of the device.

Table 2. Web browser settings

Item Default Description

On Startup

Open settings page

After a restart of the device, the setting

page is displayed

Continue where you left Jump to the application where you left

Open homepage Open the configured Homepage

Homepage https://google.com

Enter here the start page which you want

to load as homepage including http:// or

https://

Configure the Network interface

By default, all network interfaces are configured for DHCP. The ETH0 (which is

located right next to the power connector - refer to the WEB-HMI User’s manual) is

configured as WAN port and should be used to provide the connection to the

required web server.

If you connect the panel to the network using ETH0 and a DHCP server is running,

the Ip-Address is automatically requested from the DHCP server.

If no DHCP server is available or can’t be used on site, the configuration can be

changed to static IP configuration. To configure the network interface, open the

“Network” tab and press the EDIT button on the top right.

WEB-HMI4/C, WEB-HMI7/C, WEB-HMI7/CF, WEB-HMI10/CF, WEB-HMI16/CF AND WEB-HMI21/CF - USER'S MANUAL (SW)

EN2Z-1077GE51 R0621 8

Disabling the DHCP switch will allow you to enter the IP-Address manually. After

you press Save, the manually entered IP address will be used for the device.

NOTE: The device has an internal firewall which blocks all incoming network traffic,

including ICMP ping requests. Therefore, you can’t ping the device to test

the network connectivity.

Finish Quick start

The device is now correctly configured to load the homepage you entered.

Therefore, you can close the setup menu to access the homepage by clicking EXIT

in the System Settings list. Depending on the Web Browser configuration “On

Startup”, the application gets directly opened or you need to press Load Homepage

on the Settings Page.

WEB-HMI4/C, WEB-HMI7/C, WEB-HMI7/CF, WEB-HMI10/CF, WEB-HMI16/CF AND WEB-HMI21/CF - USER'S MANUAL (SW)

9 EN2Z-1077GE51 R0621

OPEN THE SYSTEM SETTINGS MENU

The system settings menu is entered after powering on the device and entering

valid credentials “Username” and “Password” into the login mask.

The main topics of configuration are listed on the left side of the system settings

screen.

WEB BROWSER

Localisation

Setup the language of the device

System

System information, Status and Timers

Logs

Configure logfile generation

Date and Time

Configure the date and time of the device

Network

Configure the network settings of the

Ethernet interfaces

Services

Use to enable the network bridge

Management

Firmware updates and basic FW and

booter configurations

Display

Display setup like colors, timeouts and

touchscreen calibration and more

Fonts

Use to install additional fonts

Authentication

Change passwords or create SSL

certificates

Restart

Restart the main or config OS

Web Browser

Configure the web browser properties like

home page

Exit

Will close the system settings view

Localisation

Use to set the language used for the text in the System Settings screen only. Select

the required language from the listed options.

County Code:

Select from the listed options. Required for WLAN regulatory domain.

System keyboard layout:

Use this option to change the layout of the virtual keyboard according to the

required language. The default keyboard layout is American English.

NOTE: The “Localisation” option does not affect the language of any other web

browser content.

WEB-HMI4/C, WEB-HMI7/C, WEB-HMI7/CF, WEB-HMI10/CF, WEB-HMI16/CF AND WEB-HMI21/CF - USER'S MANUAL (SW)

EN2Z-1077GE51 R0621 10

System

Parameter Description

Info

Provide ‘Device information’ like:

Name

Kernal version

Build date

Hardware code

Total available RAM

Status

Provides device ‘Status’ like:

Free RAM

Uptime

Average CPU Usage

Timers

Provides device “Timers” information like:

System on: Shows how many hours the HMI panel has

been powered.

Backlight on: Shows how many hours the HMI panel

backlight has been powered.

Logs

Persistent log:

Set the persistent log option if you want to maintain the log files saved after a power

reset.

NOTE: The log file manager cyclically fills 3 files of 4Mb.

Save:

Use save button to export a copy of the log files. This option allows the log file(s) to

be saved to an external storage device, e.g. USB device.

NOTE: Log file entries are timestamped with the HMI panel date and time settings.

To download the log files:

1. Access the System Settings screen. Then, select Logs.

2. Select Save. The file system screen is displayed.

3. Insert a USB memory stick into one of the USB ports of the HMI panel.

4. Select the USB device (e.g. usbmemory).

5. Select Save. This will save a file called ‘logs.tar.gz’ to the USB device.

Note: The files are downloaded in a compressed format and will require a

decompression tool (e.g. 7-Zip) in order to view the files.

To view the log files:

1. Access the USB device on a PC and navigate to the ‘logs.tar.gz’ file.

2. Using a suitable tool (e.g. 7-Zip) open the file to reveal a file called logs.tar.

3. Open the ‘logs.tar’ file to view its contents.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Honeywell Thermostat Handbücher

Honeywell

Honeywell ZonePro Bedienungsanleitung

Honeywell

Honeywell RTHL221 series Bedienungsanleitung

Honeywell

Honeywell RTH6360 Series Bedienungsanleitung

Honeywell

Honeywell ST772 Bedienungsanleitung

Honeywell

Honeywell T1 Pro Bedienungsanleitung

Honeywell

Honeywell CT40A Bedienungsanleitung

Honeywell

Honeywell T8635L Bedienungsanleitung

Honeywell

Honeywell HH07AT216 Bedienungsanleitung

Honeywell

Honeywell CM900 Bedienungsanleitung

Honeywell

Honeywell RTH1100 series Bedienungsanleitung

Honeywell

Honeywell PB112C-GA Bedienungsanleitung

Honeywell

Honeywell T410A Bedienungsanleitung

Honeywell

Honeywell TB7600 Bedienungsanleitung

Honeywell

Honeywell Lyric T6 Pro Wi-Fi Bedienungsanleitung

Honeywell

Honeywell THX9000 Prestige HD Benutzerhandbuch

Honeywell

Honeywell T841A Bedienungsanleitung

Honeywell

Honeywell CM67 Bedienungsanleitung

Honeywell

Honeywell Chronotherm IV T8602C Bedienungsanleitung

Honeywell

Honeywell Lyric Enrollment Bedienungsanleitung

Honeywell

Honeywell CM27i Bedienungsanleitung

Honeywell

Honeywell RCT8100 Bedienungsanleitung

Honeywell

Honeywell T6811 Bedienungsanleitung

Honeywell

Honeywell FocusPRO TH5000 Series Bedienungsanleitung

Honeywell

Honeywell T8000 Bedienungsanleitung

Beliebte Thermostat Handbücher anderer Marken

EWELLY

EWELLY EW-181 Bedienungsanleitung

Prolon

Prolon T1100 Montageanleitung

Computherm

Computherm Q20 Bedienungsanleitung

Heatmiser

Heatmiser neoStat Bedienungsanleitung

Aube Technologies

Aube Technologies TH111GFCI-NP 240 VCA Bedienungsanleitung

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat Bedienungsanleitung

Saswell

Saswell SAS920XWHB-7-S-RF Leitfaden

Aircalo

Aircalo TFP1-ET85P2 Bedienungsanleitung

Carrier

Carrier DEBONAIR 33CS Bedienungsanleitung

Lennox

Lennox iHarmony Zone Thermostat Montageanleitung

Gemtech

Gemtech GT7000 Bedienungsanleitung

Rollei

Rollei Smartes 45000 Bedienungsanleitung

Sinope

Sinope TH1300RF Bedienungsanleitung

NuTone

NuTone NTBZ48 Original Betriebsanleitung

Stelpro

Stelpro MAESTRO ASMT402AD Bedienungsanleitung

Aube Technologies

Aube Technologies TH305 Bedienungsanleitung

Powtier Controls

Powtier Controls 505MST Bedienungsanleitung

Kanmor

Kanmor Zone Control 369e Bedienungsanleitung