Hoover Bagless Upright Vacuum Cleaner Bedienungsanleitung

HOOVER®

Thank you for

your purchase!

Bagless Upright

This product was designed for

easy assembly (see page 3)

www.hoover.com

ENGLISH ➜pp. 1-14

ESPAÑOL ➜pág. 15-22

FRANÇAIS ➜p. 23-30

Owner’s Manual

Thank you for choosing a HOOVER product.

Please enter the COMPLETE model and serial numbers in the spaces provided.

The numbers are located on the bottom of your cleaner.

Model_________________________________________

Serial number_________________________________________

Hint: Attach your sales receipt to this owner’s manual.

Verification of date of purchase may be required for warranty service

of your HOOVER product.

Be sure to fill out and return the product registration card included with your

cleaner (see back cover).

Contents

Assembling Cleaner..........................3-4

How to use ............................................5

Cleaner Description ..........................5

Cleaning Tools................................7-8

If You Have a Problem........................13

Clearing Blockages ........................13

Important Safeguards ..........................2

Maintenance

Authorized Service..........................12

Cleaning Filters............................9-10

Emptying Dirt Cup ............................8

Lubrication ......................................12

Replacing Agitator Brush Roll ......12

Replacing Belt..................................11

Replacing Headlight ..................10-11

Thermal Protector ..............................12

Warranty ..............................................14

Important Safeguards

When using an electrical appliance, always follow

basic precautions, including the following:

READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE-

Warning:To reduce the risk of fire, electric shock, or injury:

•Do not use outdoors or on wet surfaces.

• Close supervision is necessary when any appliance is used by or near children.

Do not allow vacuum cleaner to be used as a toy or to run unattended at any time.

• Keep hair, loose clothing, fingers, feet and all parts of body away from openings,

rotating agitator and other moving parts. Do not operate cleaner in bare feet or

when wearing open toe shoes or sandals.

• Do not pick up anything that is burning or smoking, such as cigarettes, matches, or

hot ashes.

• Do not use to pick up flammable or combustible materials such as gasoline or fine

wood sandings or use in areas where they may be present.

• Avoid picking up hard, sharp objects with the cleaner. They may damage the

cleaner.

• Always turn off this appliance before connecting or disconnecting hose.

• Do not use without dirt cup or filters in place. Empty dirt cup and clean filters fre

quently when picking up very fine materials such as powder.

• Use extra care when cleaning on stairs.

• Do not put any object into openings. Do not use with any opening blocked; keep

free of dust, lint, hair, or anything that may reduce air flow.

• Do not pull or carry by cord, use cord as a handle, close door on cord or pull cord

around sharp edges or corners. Do not run appliance over cord. Keep cord away

from heated surfaces.

• Always disconnect cord from electrical outlet before servicing the cleaner.

• Unplug cleaner when not in use. Turn off all controls before unplugging.

• Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord. Never

handle plug or appliance with wet hands.

• The use of an extension cord is not recommended.

• Do not use with damaged cord or plug. If appliance is not working as it should, has

been dropped, damaged, left outdoors, or dropped into water, take it to a Hoover

Factory Service Center or Authorized Hoover Warranty Service Dealer (Depot).

• Use vacuum cleaner only for its intended use as described in the instructions.

Use only attachments recommended by The Hoover Company; others may cause

hazards.

Save these instructions!

www.hoover.com

Review this manual before

operating cleaner

XXXXXX XXXXXX

XXXXXXXXXXXX

SERIAL

NUMBER

1. Cleaner Assembly

If you need any assistance:

Visit our website at www.hoover.com. Click on the “Service” button

to find the service outlet nearest you OR

Call 1-800-944-9200 for an automated referral of service outlet

locations (U.S. only) OR

Call 1-330-499-9499 to speak with a representative in our Consumer

Response Center.

Please do not return this product to the store.

Carton contents

Empty carton. Find the parts shown

before disposing of packing materials.

A. Handle section

B. Cleaner body

C. Hose, cleaning tools and wands

(*some models include a crevice

wand)

D. Handle bolts and nuts packet (in

bag with owner’s manual)

Continued

➜

1-1

C*Included with

some models

Attach handle

1-2 1-3 1-4

Remove tape and remove dirt cup from

cleaner body.

Switch (A) should be in OFF position.

Slide handle onto cleaner body. Push bolts into holes on back of handle.

Align end of hose with projections

(A) over slots (B) in dirt duct. Slide hose into duct (B) and twist

hose to lock it into place.

Snap ends of dusting brush (A),

crevice tool (B) and furniture nozzle

1-10

1-5

1-8

1-6 1-7

1-9

1-12

Place nuts in recessed areas on

front of handle. Hold each nut in

place while tightening each bolt

securely with a Phillips screw driver.

Place bottom of cup into cleaner.

Pivot cup and snap in place. Position cord on back of cleaner as

shown and press cord into clip.

1-11 1-13

Place smaller unridged end of wand

into bottom of rack. Snap wand into

clip. Repeat with other wand.

Attach hose

Position tools

Note: Hose must be connected as shown for

all operations.

Lift hose tube cover (C).

Position hose over hose hook (D)

and into hose tube (E).

Some models include a long crevice

wand (D) instead of the short

crevice tool. The crevice wand is

packed inside one of the extension

wands. Place it inside a wand for

storage on the cleaner as well.

Continued

➜

1. Handle

2. Cord hooks: wrap cord

around hooks for storage.

The top hook rotates right

or left for easy cord

release.

3. Hose

4. ON/OFF switch: located

on left rear corner of

cleaner body

5. Carrying handle

6. Stair cleaning handle:

located on lower edge of

dirt cup.

7. Handle release lever: step

on lever to lower handle to

operating or low positions.

8. Headlight

9. Nozzle control knob: slide

knob to correct setting for

height of carpet being

cleaned.

10. Furniture guard: helps

prevent cleaner from

marking furniture.

11. Wands

12. Final filter exhaust

13. Dusting brush

14. Crevice tool*

15. Furniture nozzle

16. Long crevice wand*:

stores inside wand

17. Hose hook

18. Dirt cup latch

19. Dirt cup lid

20. Dirt cup

21. Dirt cup handle

22. Pleated filter (inside

cup)

23. Pre-filter assembly

(inside cup)

*Some models only

Cleaner description

2. How to use

Operate cleaner only at

voltage specified on data

plate on bottom of

cleaner.

This cleaner is intended

for household use.

Polarized plug

To reduce the risk of electric shock, this

appliance has a polarized plug (one

blade is wider than the other). This plug

will fit in a polarized outlet only one way.

If the plug does not fit fully in the outlet,

reverse the plug. If it still does not fit,

contact a qualified electrician to install the

proper outlet. Do not change the plug in

any way.

ON-OFF switch

Plug cord into electrical outlet.

To turn cleaner ON, push switch (A) toward

front of cleaner.

To turn cleaner OFF, push toward back of

cleaner.

Cord clip

To help keep the cord out of the way while

vacuuming, position cord down into cord

clip (B) located between top cord hook

and handle.

2-2 2-3

2-1 1

22 20

317

Handle position

For ease in sliding knob, place handle

in the upright position (C).

The nozzle will not move into the

adjusted position until the cleaner

handle is lowered to the operating

position (D).

Settings

For maximum cleaning performance,

the following carpet height settings are

recommended.

• Lowest setting: for all types of carpet

and hard floors.

Note: If the cleaner is difficult to push,

slide knob to the next higher setting.

• Higher settings: for very deep pile

carpet where easier pushing effort is

desired, while maintaining good cleaning

performance.

Carpet height

adjustment

The cleaning of carpet and rugs takes

place at the nozzle (A).

When it is necessary to raise and lower the

nozzle for various carpet pile heights, slide

the nozzle control knob (B) to the desired

setting.

Carrying handle

Use the carrying handle to lift the

cleaner.

Handle positions

The handle of your cleaner has three

positions; upright for storage and when

using cleaning tools; operating posi-

tion for general operation on carpet

and floors; low for reaching under low

furniture. Step on handle release lever

to lower handle.

Transporting cleaner

Put handle in upright position. Tilt

cleaner back on rear wheels. Push

forward.

2-4 2-5 2-6

2-7 2-8 2-9

Hard

Floor

High

HIGH

BARE FLOOR

Cleaning lightweight

flexible rugs

Stand on one end of rug and move

cleaner toward other end or edge.

Before reaching edge, push down on

handle. This will lift up the nozzle (front

of cleaner) as shown and will prevent

rug from clinging to cleaner. Continue to

lift up nozzle so that when you have

reached the edge, it is completely off

the rug. Move cleaner back to start

again, lower nozzle, and use only for-

ward strokes.

Edge cleaning

Edge cleaning is provided on both sides

of the nozzle to remove dirt in carpet

near baseboards and furniture.

Guide either side of nozzle parallel to

edge of carpet or furniture.

Cleaning tools

Tools allow for cleaning surfaces above

the floor and for reaching hard to clean

areas.

The cleaner is ready for tool use when

handle is in upright position.

CAUTION: Agitator continues to

rotate while cleaner handle is in

upright position. Avoid tipping clean-

er or setting it on furniture, fringed

area rugs or carpeted stairs during

tool use.

How to clean tools

To clean the hose, wipe off dirt with a

cloth dampened in a mild detergent.

Rinse with a damp cloth.

Cleaning tools may be washed in warm

water with a detergent. Rinse and air dry

before using.

2-10 2-11 2-12

2-14 C

Select proper tool

C. Dusting brush may be used for

carved furniture, table tops, books,

lamps, lighting fixtures, venetian blinds,

baseboards, shutters, and registers.

D. Furniture nozzle may be used for

upholstered furniture, draperies, mat-

tresses, clothing, automobile interiors,

and carpeted stairs.

E. Crevice tool may be used in tight

spaces, corners and along edges in

such places as dresser drawers, uphol-

stered furniture, stairs and baseboards.

F. Extension wands are used to give

extra length to your hose. Use it with any

of the above tools.

2-13

Stair cleaning

A stair cleaning handle has been

designed for ease in using your cleaner

on stairs. With handle in operating posi-

tion, place fingers under edge of stair

cleaning handle and guide cleaner with

other hand on upper handle.

As an alternative, you may use the hose

and furniture nozzle for stair cleaning.

Clean from bottom to top.

When using cleaning tools, the agita-

tor will continue to rotate.

CAUTION: To avoid personal injury or

unnecessary wear to carpet, and to

prevent the cleaner from falling,

always place it at the bottom of the

stairs.

Remove hose

When using cleaning tools, cleaner

handle should be in the upright posi-

tion. Also, turn cleaner OFF before

disconnecting and connecting hose

to hose tube (A).

To use hose, lift hose end as shown.

Lower cover (B) onto hose tube. When

you are finished cleaning with the tools,

be sure to lift cover from hose tube

and reposition hose end into tube.

3. Maintenance

When to empty

It is recommended that the dirt cup be

emptied before the dirt reaches the dirt

opening on back of dirt cup (Fig. 3-1) or

after every use if preferred.

CAUTION: Very fine materials, such

as face powder or cornstarch, may

seal the filter and cause loss of suc-

tion. When using the cleaner for this

type of dust, empty the cup and clean

the filters often.

How to empty

Disconnect cleaner from electrical

outlet. Do not use the cleaner without

dirt cup or filters in place.

Remove cup - Squeeze dirt cup

latch. Pull cup forward.

2-15

Familiarize yourself with these home

maintenance tasks as proper use and

care of your cleaner will ensure contin-

ued cleaning effectiveness.

Dirt cup

The dirt cup assembly consists of the

following parts:

Lid (A)

Dirt Cup (B)

Pre-filter Assembly (C)

Pleated Filter (D)

(behind pre-filter)

Dirt Opening (E)

While the cleaner is in operation, the

pre-filter assembly screen will stop

larger debris from entering the pleated

filter chamber. This larger debris will be

seen collecting in the left side of the dirt

cup. The pleated filter will collect fine

particles that have passed through the

pre-filter assembly screen.

2-17

2-16

3-1

3-2

3-3

Attach wand and tools

Attach tool or wand to the hose (G) by

pushing it firmly into hose.

Attach second wand or tool to the wand in

the same manner.

Twist wand or tool slightly to tighten or

loosen the connection.

Extra reach hose

(available at additional cost)

The extra reach hose provides you with a

20 foot reach to allow easier cleaning of

stairs and hard to reach places. Follow the

steps below for attaching and detaching

hose.

Push ON/OFF switch to OFF position.

Remove regular hose from cleaner.

Align end of extra reach hose with projec-

tions (H) over slots (I) in dirt duct.

Slide hose into slots (I) and twist hose to

lock it into place.

To detach hose, reverse procedure.

Attach wands or tools to the other end of

hose.

Empty cup - Remove lid.

Note: It is not necessary to remove the

pleated filter or the pre-filter assembly to

empty the dirt cup.

Tap side of cup until no more dust parti-

cles fall from the pleated filter.

Replace cup - Replace dirt cup lid.

Place bottom of cup into cleaner. Pivot

cup and snap into place.

3-4

3-10

3-6

3-5

3-7

3-8 3-9

3-11

Pull up on pre-filter assembly. Slide it out

of cup.

Replace dirt cup.

Filter assembly

How to clean filter

assembly

Remove dirt cup and dirt cup lid as

described in “How to empty dirt cup”.

Pivot pre-filter assembly toward center of

cup.

Remove pleated filter from pre-filter

assembly.

The screen (C) can be cleaned with a

soft brush or rinsed with water.

Do not rinse or wash the pleated filter.

Slide pre-filter assembly all the way to

bottom of cup.

Pivot pre-filter assembly and snap in

place.

Replace dirt cup lid.

If lid will not close completely, the

pre-filter assembly is not positioned

correctly.

Lay filter on top of pre-filter. Make sure

all filter pleats are inside the edges of

the pre-filter. Press on filter gasket (F)

until 4 tabs (G) (2 on either side of filter)

are set in the slots (H) on the pre-filter.

Be careful not to press the filter gasket

below the pre-filter edge.

Bend filter to open pleats.

Tap edges of filter until dust particles

stop falling from filter.

Do not tap the soft, pleated part of the

filter. It could damage the filter.

Remove lens - Disconnect clean-

er from electrical outlet.

Using a screwdriver, remove the two

screws as shown and lift off lens.

3-16

3-15

Secondary and final

filters

Cleaning secondary filter

Disconnect cleaner from electrical

outlet.

The secondary filter (G), located under-

neath the retainer in the bottom of clean-

er cavity, protects the motor from dirt

particles.

If filter becomes dirty, remove dirt cup

(Fig. 3-2). Remove screw and pull

retainer out. Lift out filter.

Hand wash filter in cold water with mild

detergent, then air dry.

Reposition dry filter, retainer and screw.

Replace dirt cup.

Should you want to replace this filter, ask

for HOOVER part No. 38765019.

3-13

Cleaning final filter

The final filter assists in returning clean

air to the room.

To remove this filter when it becomes

dirty, remove dirt cup and pull down top

of filter.

Check agitator shield

Because your cleaner picks up so well,

we strongly recommend you check for

debris accumulation under the agitator

shield each time you clean the filters.

Removing debris under the shield will

help maintain your cleaner’s excellent

pick up and suction. Remove debris as

follows:

1. Disconnect cleaner from electrical

outlet.

2. Check for dirt accumulation by remov-

ing bottom plate (Fig. 3-18), removing

agitator (Fig. 3-19), and lifting agitator

shield (Fig. 3-22).

3. Remove any debris and replace

shield, agitator and bottom plate (Figs.

3-22 to 3-24).

3-14

Removing and replacing filter

Lift out filter (H) and hand wash it in cold

water with mild detergent.

Let filter air dry and reposition it on the

side of cleaner.

Reposition dirt cup.

Should you want to replace this filter, ask

for HOOVER part No. 40110004.

Do not operate cleaner without any of

the filters in place.

Headlight replacement

What to buy

This cleaner uses a 12 volt, wedge base

type 912 bulb, HOOVER part No.

27313101.

Install bulb - Pull old bulb straight

out of socket. Push new bulb straight

into socket until locked in place

Excessive force is not required.

3-12

Andere Handbücher für Bagless Upright Vacuum Cleaner

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Hoover Staubsauger Handbücher

Hoover

Hoover zenith Bedienungsanleitung

Hoover

Hoover ONEPWR EVOLVE PET ELITE Bedienungsanleitung

Hoover

Hoover UH40080 Bedienungsanleitung

Hoover

Hoover Telios Plus TE80 PET 011 Bedienungsanleitung

Hoover

Hoover air lift Bedienungsanleitung

Hoover

Hoover U5269900 - Inc/Tti Floor Care Empower Bagless... Bedienungsanleitung

Hoover

Hoover Conquest 14 Bedienungsanleitung

Hoover

Hoover H-PURE 700 STEAM Bedienungsanleitung

Hoover

Hoover SSN1700 Steamjet Bedienungsanleitung

Hoover

Hoover ALYX Bedienungsanleitung

Hoover

Hoover TASKVAC H-8580 Bedienungsanleitung

Hoover

Hoover FloorMate, SpinScrub Floor Mate Spin Scrub Hard Floor... Bedienungsanleitung

Hoover

Hoover Stick Cleaner S2535 Bedienungsanleitung

Hoover

Hoover Guardsman C1633 Benutzerhandbuch

Hoover

Hoover uh74200 Bedienungsanleitung

Hoover

Hoover 7000PH Allergy Bedienungsanleitung

Hoover

Hoover 7011PH Allergy Bedienungsanleitung

Hoover

Hoover Presto 2-in-1 Bedienungsanleitung

Hoover

Hoover 39100144 Bedienungsanleitung

Hoover

Hoover SteamVac SteamVac with Clean Surge Bedienungsanleitung

Hoover

Hoover FH40005 Bedienungsanleitung

Hoover

Hoover Telios Extra TX40PET Bedienungsanleitung

Hoover

Hoover Spirit S3503 Bedienungsanleitung

Hoover

Hoover Elite Rewind Bedienungsanleitung

Beliebte Staubsauger Handbücher anderer Marken

Bissell

Bissell LittleGreen Proheat 1425 Series Bedienungsanleitung

Panasonic

Panasonic MC-YL637S147-AE Bedienungsanleitung

LG A9 Series Bedienungsanleitung

Oreck

Oreck Cordless Captura BK51700 Series Bedienungsanleitung

Kogan

Kogan KAVACROBVWA Bedienungsanleitung

Kränzle

Kränzle VENTOS 50 ID Benutzerhandbuch

NEFF

NEFF N17XH10 0 Series Bedienungsanleitung

EVVO

EVVO Ai35 Bedienungsanleitung

DeWalt

DeWalt DWH200D Bedienungsanleitung

Pontec

Pontec Pondomatic Vacuum Cleaner Bedienungsanleitung

Cleanmaxx

Cleanmaxx PC-P007E Bedienungsanleitung

RIDGID

RIDGID WD1685AU0 Bedienungsanleitung

Ezviz

Ezviz RE4P Bedienungsanleitung

STG global

STG global TANVAC HDV3000 Bedienungsanleitung

Shark

Shark ROTATOR PRO COMPLETE NV550 Series Bedienungsanleitung

Factory

Factory M3340 Bedienungsanleitung

Shop-Vac

Shop-Vac VN92 SERIES Bedienungsanleitung

Nobles

Nobles 608669 Produkthandbuch