Hoover Commercial WindTunnel Bedienungsanleitung

Important Safeguards!

When using an electrical appliance, always follow basic precautions, including the following:

READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE

Warning:To reduce the risk of fire, electric shock, or injury:

Index

Assembling Cleaner......................... 2-4

Cleaner Descriptions ...........................4

How To Use

Embedded Dirt FINDERTM Feature ...5

Cleaning Tools ................................7

Upright Cleaner........................... 4-6

If You Have a Problem .......................11

Important Safeguards..........................1

Lubrication..........................................11

Maintenance

Authorized Service .......................11

Cleaning Filters...............................8

Clearing Blockages ......................10

Replacing Agitator........................10

Replacing Belt........................... 9-10

Replacing Edge Groomers...........10

Replacing Headlight .......................9

Replacing Filter Bag ................... 7-8

Thermal Protector ..............................10

Unpacking Cleaner...............................2

Warranty..............................................11

HOOVER

• Do not use outdoors or on wet surfaces.

• Close supervision is necessary when any appliance is used by or near children.

Do not allow vacuum cleaner to be used as a toy or to run unattended at any

time.

• Keep hair, loose clothing, fingers, feet and all parts of body away from openings,

rotating agitator and other moving parts. Do not operate cleaner in bare feet or

when wearing open toe shoes or sandals.

• Do not pick up anything that is burning or smoking, such as cigarettes, matches,

or hot ashes.

• Do not use to pick up flammable or combustible liquids such as gasoline or use

in areas where they may be present.

• Avoid picking up hard, sharp objects with the cleaner. They maydamage the

cleaner and the bag.

• Always turn off this appliance before connecting or disconnecting hose.

• Do not use without dust bag or filters in place. Change bag frequently when

picking up very fine materials such as powder.

• Use extra care when cleaning on stairs.

• Do not put any object into openings. Do not use with any opening blocked; keep

free of dust, lint, hair, or anything that may reduce air flow.

• Do not pull or carry by cord, use cord as a handle, close door on cord or pull

cord around sharp edges or corners. Do not run appliance over cord. Keep cord

away from heated surfaces.

• Always disconnect cord from electrical outlet before servicing the cleaner.

• Unplug cleaner when not in use. Turn off all controls before unplugging.

• Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord. Neve

handle plug or appliance with wet hands.

• The use of an extension cord is not recommended.

• Do not use with damaged cord or plug. If appliance is not working as it should,

has been dropped, damaged, left outdoors, or dropped into water, take it to a

Hoover Factory Service Center or Authorized Hoover Warranty Service Dealer

(Depot).

• Use vacuum cleaner only for its intended use as described in the instructions.

Use only attachments recommended by The Hoover Company; others may cause

hazards.

WindTunnel

Thank you for selecting a HOOVER product

DO NOT RETURN THIS PRODUCT TO THE STORE.

This cleaner was inspected and packaged carefully before being shipped from the

factory. If you should happen to need assistance during assembly or operation,

call

1-330-499-9499 to speak with a representative in our Consumer

Response Center.

1-800-944-9200 for an automated referral of authorized service

outlet locations (U.S. only) or

Owner’s Manual

ENGLISH ➜ pp.1-11

ESPAÑOL➜ pág. 12-17

FRANÇAIS ➜ p. 18-23

Review this

manual before

operating cleaner

1-330-499-9499 to speak with a

representative in our Consumer

Response Center.

This cleaner is intended for house-

hold use.

If you need assistance with any step

of the assembly, call 1-800-944-9200

for an automated referral of service

outlet locations (U.S. only) or

Assembling cleaner

The assembled cleaner will look like

this drawing.

It is extremely important

to read and

follow all instruction

steps in order.

Fill in and retain

The model and serial number are located on the bottom of the cleaner as shown.

For your personal records, please enter the COMPLETE model and serial number

in the spaces provided and retain this information.

Your cleaner is model___________________________________

and has serial number___________________________________

It is suggested that you attach your sales receipt to this owner’s manual. Verifica-

tion of date of purchase may be required for warranty service of your HOOVER

product.

Be sure to fill out and return the product registration card included with

your cleaner.

Example

1Remove all parts from carton

and identify each item shown.

Make sure all parts are located

before disposing of packing.

A. Handle section

B. Cleaner body

C. Hose, cleaning tools and wands

D. Handle bolts and nuts packet

(in bag with owner's manual)

Not required for assembly:

E. Extra filter bag (one already

installed in cleaner)

F. Extra belt (one already installed

in cleaner)

STEP I Unpack carton

STEP II Attach handle

2 3 Slide handle onto cleaner body. Push bolts into holes on back of

handle.

5Place nuts in recessed areas on

front of handle. Hold each nut

in place while tightening each bolt

securely with a Phillips screw driver.

Continued ➜

STEP III Attach hose

Align end of hose with projec-

tions (A) over slots (B) in dirt

duct.

8910

Slide hose into (B) and twist

hose to lock it into place. Lift hose tube cover (C).

Position hose over hose hook(D)

and into hose tube (E).

Remove bag door on cleaner

body by pushing down at top of

door and pulling door outward.

Switch (A) above bag door should

be in OFF position.

6Reposition bag door by fitting

tabs on bottom of door into

opening. Press top of door to snap

securely shut.

7Position cord on back of cleaner

as shown and press cord into

clip.

Note: Hose must be connected as shown for

all operations

STEP IV Position tools

11 12

11 Place smaller unridged end of

wand, into bottom of rack.

Snap wand into clip. Repeat with

other wand.

12 Snap ends of dusting brush (A),

crevice tool (B) and furniture

nozzle (C) into clips as shown.

Cleaner description

13 1

8910

1. Handle

2. Cord hooks: wrap cord around

hooks for storage. The top

hook can be rotated right or left

for easy cord release.

3. Hose

4. ON/OFF switch: located on left rear

corner of cleaner body

5. Carrying handle

6. Bag door

7. Stair cleaning handle: located on

lower edge of bag door.

8. Handle release lever: step on

lever to lower handle to operating or low

positions.

9. Headlight*

10. Nozzle control knob: slide

knob to correct setting for height of

carpet being cleaned.

11. Furniture guard: helps prevent

cleaner from marking furniture.

12. Edge groomers

13. Embedded Dirt FINDER

display*

14. 'Dirt FINDER' sensitivity switch*

15. Wands

16. Check bag indicator*

17. Final filter exhaust

18. Dusting brush

19. Crevice tool

20. Furniture nozzle

21. Hose hook

*some models only

The assembled cleaner will look like the

drawing above.

Operate cleaner only at voltage

specified on data plate on bottom of

cleaner.

How to use

To reduce the risk of electric shock, this

appliance has a polarized plug (one

blade is wider than the other). This plug

will fit in a polarized outlet only one way.

If the plug does not fit fully in the outlet,

reverse the plug. If it still does not fit,

contact a qualified electrician to install

the proper outlet. Do not change the

plug in any way.

To help keep the cord out of the

way while vacuuming, position cord

down into cord clip (A) located between

top cord hook and handle.

Plug cord into electrical outlet.

To turn cleaner ON, push switch (B)

toward front of cleaner.

To turn cleaner OFF, push (B) toward

back of cleaner.

16 18

18 The cleaner can also be moved by

using the carrying handle.

EmbeddedDirtFINDERTM

feature (some models only)

With red and green lights (A), the

‘Dirt FINDER’ system alerts the user

to areas of carpet that may need more

cleaning attention. It is able to sense

when larger amounts of dirt particles,

especially embedded dirt, are removed.

To let you know that the “Dirt FINDER’

feature is ready the red light will come on

when the cleaner is first turned on. After

a few seconds, the red light will go off

and the green light will come on.

Cleaning may then begin.

The green light will remain on through-

out cleaning except when the detector

senses that a larger amount of dirt is

being picked up; then the red light will

come on.

When the red light is on, you should take

additional cleaning strokes in the area

until it changes to green.

•The red light may seldom come on

during cleaning. This means that your

cleaner is picking up primarily fine

surface dust and lint which the system

may not detect, or that the carpet is

generally clean. To increasethe

feature’s sensitivity to dirt, set the

switch (B) to the “Hi” position.

•At other times, the red light may stay

on for a considerable amount of time.

This means that the carpet contains a

high level of dirt which is being removed

by the cleaner. To decrease the

feature’s sensitivity to dirt, set the

switch to the “Reg.” (Regular) position.

Handle positions

The handle of your cleaner has

three positions; upright for storage

and when using cleaning tools; operat-

ing position for general operation on

carpet and floors; low for reaching under

low furniture. Step on handle release

lever to lower handle.

Transporting cleaner

17 To move your cleaner from room to

room, put handle in upright

position, tilt cleaner back on rear wheels

and push forward.

21 22

HIGH

Carpet height

adjustment

20 The cleaning of carpet and rugs

takes place at the nozzle (A).

When it is necessary to raise and lower

the nozzle for various carpet pile heights,

slide the nozzle control knob (B) to the

desired setting.

21 For ease in sliding knob, the handle

should be in the upright position (C).

The nozzle will not move into the

adjusted position until the cleaner

handle is lowered to the operating

position (D).

For maximum cleaning perfor-

mance, the following carpet height

settings are recommended.

• Lowest setting: for all types of carpet

• Higher settings: for very deep pile

carpet where easier pushing effort is

desired, while maintaining good clean-

ing performance.

Note: If the cleaner is difficult to push,

slide knob to the next higher setting.

23 25

Stand on one end of rug and move

cleaner toward other end or edge.

Before reaching edge, push down on

handle. This will lift up the nozzle (front of

cleaner) as shown and will prevent rug

from clinging to cleaner. Continue to lift

up nozzle so that when you have reached

the edge, it is completely off the rug.

Move cleaner back to start again, lower

nozzle, and use only forward strokes.

Edge cleaning Stair cleaning

25 A stair cleaning handle has been

designed for ease in using your

cleaner on stairs. With handle in operat-

ing position, place fingers under edge of

stair cleaning handle and guide cleaner

with other hand on upper handle.

As an alternative, you may use the hose

and furniture nozzle for stair cleaning.

Clean from bottom to top.

When using cleaning tools, the agitator

will continue to rotate.

CAUTION: To avoid personal injury or

unnecessary wear to carpet, and to

prevent the cleaner from falling, always

place it at bottom of stairs.

Cleaning lightweight

flexible rugs Special edge groomers are

provided on both sides of the

nozzle to remove dirt in carpet near

baseboards and furniture. Guide either

side of nozzle parallel to edge of carpet

or furniture.

BARE

FLOOR

Cleaning tools

Tools allow for cleaning surfaces above

the floor and for reaching hard to clean

areas.

The cleaner is ready for tool use when

handle is in upright position.

CAUTION: Agitator continues to rotate

while cleaner handle is in upright

position. Avoid tipping cleaner or

setting it on furniture, fringed area

rugs or carpeted stairs during tool use.

How to clean tools

To clean the hose, wipe off dirt with a

cloth dampened in a mild detergent.

Rinse with a damp cloth.

Cleaning tools may be washed in warm

water with a detergent. Rinse and air dry

before using.

26 AB

Select proper tool

A. Dusting brush may be used for

carved furniture, table tops, books,

lamps, lighting fixtures, venetian blinds,

baseboards, shutters, and registers.

B. Furniture nozzle may be used for

upholstered furniture, draperies,

mattresses, clothing, automobile

interiors, and carpeted stairs.

C. Crevice tool may be used in tight

spaces, corners and along edges in

such places as dresser drawers,

upholstered furniture, stairs and base-

boards.

D. Wands are used to give extra length

to your hose. Use them with any of the

above tools.

Maintenance 29

Familiarize yourself with these home

maintenance tasks as proper use and

care of your cleaner will ensure contin-

ued cleaning effectiveness.

The filter bag

When to replace

Check filter bag from time to time. It is

recommended that you change the filter

bag when dirt reaches the dotted line. If

more dirt than this accumulates, your

cleaner will not operate effectively.

For models with “Check Bag”

indicator (A), the indicator will begin

to show red as filter bag fills with dirt.

There are three conditions that will cause

the indicator to become completely red:

1. The bag is full; change the bag.

2. Very fine materials have been picked

up, clogging the bag pores; change the

bag.

3. There is a blockage the nozzle, hose,

tools or at the bag opening; remove the

blockage ("Clearing blockages" p. 10).

CAUTION: Very fine materials, such as

face powder, cornstarch, fireplace

ashes or fireplace soot, may seal the

filter bag and may cause it to burst

even though it is only partially full of

dirt. When cleaner is used to remove

material of this nature, change filter

bag often.

Continued ➜

Attach wand and

tools

When using cleaning tools, cleaner

handle should be in the upright

position. Also, turn cleaner OFF

before disconnecting and connecting

hose to hose tube (A).

To use hose, lift hose end as shown.

28 Attach tool or wand to the hose (C)

by pushing it firmly into hose.

Attach second wand or tool to wand (D)

by pushing it firmly onto the wand.

Twist wand or tool slightly to tighten or

loosen the connection.

Lower cover (B) onto hose tube. When

you are finished cleaning with the tools,

be sure to lift cover from hose tube

and reposition hose end into tube.

Where to buy

Filter bags may be purchased from your

Authorized Hoover Dealer (Depot) or from

a Hoover Factory Service Center. When

ordering filter bags, be sure to give the

model number of your cleaner.

What to buy

To assure cleaning effectiveness, use

only Genuine HOOVER® Allergen

Filtration Type Y disposable filter bags.

31 Grasp filter bag collar (A) and pull

collar from tube (B).

Note: Do not clean out old filter bag and

reuse. Discard used filter bag.

Hold new filter bag as shown. Align

opening in filter bag with (B).

Push (A) firmly onto (B).

Tuck in filter bag.

Reposition bag door by placing

tabs on bottom of door into

opening (C).

Press top of door to snap securely shut.

The secondary and

final filters

How to clean

Disconnect cleaner from electrical

outlet.

The secondary filter (A), located

behind the grill in the bottom of

bag compartment, protects the motor

from dirt particles.

The final filter assists in the

filtration process to return clean air

to the room.

To remove this filter when it becomes

dirty, remove bag door and pull down top

of filter.

Lift out filter (B) and hand wash it in

cold water with mild detergent.

Let filter air dry and reposition it on the

side of cleaner. Make sure green

colored side of filter faces outward.

Reposition bag door.

If filter becomes dirty, pull off grill and lift

out filter.

Hand wash filter in cold water with mild

detergent, then air dry.

Reposition dry filter and grill.

Should you want to replace this filter, ask

for HOOVER part No. 38765019.

Should you want to replace this filter, ask

for HOOVER part No. 38766008.

Do not operate cleaner without either

the secondary or final filter in place.

How to replace

Disconnect cleaner from electrical

outlet.

To change filter bag, push down at

top of bag door and pull door

forward. Remove door.

To assure that your cleaner operates at

peak performance, it is imperative that

you use only genuine HOOVER filter bags

made by The Hoover Company.

HOOVER bags can be identified by these

trademarks —

36 38

The headlight

(some models only)

What to buy

This cleaner uses a 12 volt, wedge base

type 912 bulb, Hoover part No. 27313-101.

How to replace

Disconnect cleaner from electrical

outlet.

Using a screwdriver, remove the

two screws as shown and lift off

lens.

Pull old bulb straight out of socket.

Push new bulb straight into socket

until locked in place.

Excessive force is not required.

Reposition lens and secure with

the two screws.

37 38

The belt

The belt on your Hoover cleaner causes

the agitator to rotate and is important for

the effective operation of the cleaner. The

belt is located under the bottom plate of

the cleaner and should be checked from

time to time to be sure it is is in good

condition.

What to buy

To assure effective operation, use only

genuine HOOVER belts with your cleaner.

When purchasing a new belt, ask for

HOOVER part No. 38528-033.

When to replace

Disconnect cleaner from electrical

outlet.

To check belt, remove bottom plate as

shown in “How to replace.” Replace belt

if it is stretched, cut or broken.

4039

How to replace

Disconnect cleaner from electrical

outlet.

Place handle in low position and turn

cleaner over so bottom side is up.

Remove agitator and used belt.

Discard used belt.

Remove the 4 screws as shown

with a Phillips screw driver.

Lift off bottom plate (A).

With lettering on outside of belt and

positioned as shown in box on (D),

slide new belt over motor pulley (B).

Insert agitator through belt and

place belt in belt guide (C) on

agitator.

Should the agitator shield (D) become

dislodged while replacing the belt or the

agitator, reposition it as shown noting the

placement of its belt guide (E).

Grasp agitator firmly and fit it into

position by first sliding end opposite

the belt into the rectangular slot (F) on

side of cleaner.

Pull other side of agitator (G) into place.

Turn agitator making sure belt is not

pinched between agitator and agitator

shield.

Continued ➜

44 Reposition bottom plate and 4

Phillips head screws. Tighten

screws securely.

The edge groomers

When to replace

The edge groomers, located on both

sides of the nozzle, should be replaced

when they no longer extend past the

surface of the bottom plate.

What to buy

When purchasing edge groomers, ask for

HOOVER part No. 39511004.

How to replace

Disconnect cleaner from electrical

outlet.

Remove bottom plate as described in

“The belt” section (Fig. 39).

Lift off both old edge groomers and

slide new edge groomers into

position as shown.

Reposition bottom plate and secure with

4 Phillips head screws.

46 47

When to replace

When agitator brushes are worn,

the agitator should be replaced.

To check condition of brushes, move

edge of a card across bottom plate while

turning agitator. To maintain cleaning

effectiveness, replace agitator if

brushes do not touch card.

The agitator brush roll

How to replace

Disconnect cleaner from electrical

outlet.

Remove bottom plate, belt and agitator

following directions in “The belt” section

beginning with Fig. 39.

Discard old agitator.

Continue following the directions in “The

belt” section to reposition belt, new

agitator and bottom plate.

What to buy

Your cleaner requires either a 13” or 15”

agitator. When purchasing a new

agitator, ask for one of the following:

13” - HOOVER part No. 48414057

15” - HOOVER part No. 48414017

Clearing blockages

Disconnect cleaner from electrical

outlet.

Low suction or pick up may be due to a

blockage in the system. Refer to the

following steps to check for blockages

continuing with each step until the

blockage is found:

1. Check fullness of filter bag; change if

needed.

2. Plug cleaner in and turn ON.

Check for suction at end of hose

(A).

a. If there is suction,continue with

step 3.

b. If there is no suction, check for

blockage in hose and dirt tube as

follows:

1) Disconnect hose from dirt duct (C)

by reversing procedure for "Attach

hose" on p. 3, Fig. 8 and 9.

2) Clear out hose.

3) Look into (C) and remove blockage.

3. Check connection at hose tube (B);

remove any blockage.

4. Turn cleaner OFF and unplug.

5. Remove bottom plate, belt and agitator

(see “The belt” section).

Look into opening (D) for blockages

and remove.

6. Remove agitator shield (see Fig. 42)

and remove any loose debris which may

have accumulated under it.

Thermal protector

An internal thermal protector has been

designed into your cleaner to protect it

from overheating.

When the thermal protector activates,

the cleaner will stop running. If this

happens, proceed as follows:

1. Turn the cleaner OFF and

disconnect it from the electrical outlet.

2. Check secondary and final filters for

dirt accumulation.

3. Refer to "Clearing blockages"

section.

4. When cleaner is unplugged and

motor cools for 30 minutes, the

thermal protector automatically resets

and cleaning may continue.

If the thermal protector continues to

activate after following the above steps,

your cleaner may need servicing (see

"Service" section).

Andere Handbücher für Commercial WindTunnel

Inhaltsverzeichnis

Andere Hoover Staubsauger Handbücher

Hoover

Hoover SAVVY U8135-900 Bedienungsanleitung

Hoover

Hoover HGO320H Bedienungsanleitung

Hoover

Hoover Acenta Bedienungsanleitung

Hoover

Hoover BH52210 Bedienungsanleitung

Hoover

Hoover MPWR 40V CH93619 Bedienungsanleitung

Hoover

Hoover TurboPOWER WindTunnel S3646 Bedienungsanleitung

Hoover

Hoover QS Quiet Bedienungsanleitung

Hoover

Hoover ALYX Bedienungsanleitung

Hoover

Hoover PurePower Greenray Bedienungsanleitung

Hoover

Hoover Stick Vacuum Bedienungsanleitung

Hoover

Hoover POWER SCRUB Bedienungsanleitung

Hoover

Hoover TSBE2003 011 Bedienungsanleitung

Hoover

Hoover Spirit S3503 Bedienungsanleitung

Hoover

Hoover SPRINT BAGLESS TSU2001 Bedienungsanleitung

Hoover

Hoover Vacuum cleaner Bedienungsanleitung

Hoover

Hoover PUREPOWER Bedienungsanleitung

Hoover

Hoover Elite Rewind U5509-950 Bedienungsanleitung

Hoover

Hoover Velocity Evo Bedienungsanleitung

Hoover

Hoover Spritz AL71SZ02 Bedienungsanleitung

Hoover

Hoover FREESPACE EVO Bedienungsanleitung

Hoover

Hoover fh50800 Bedienungsanleitung

Hoover

Hoover Acenta Bedienungsanleitung

Hoover

Hoover FH10025 Bedienungsanleitung

Hoover

Hoover UH40110 Bedienungsanleitung

Beliebte Staubsauger Handbücher anderer Marken

Bissell

Bissell LittleGreen Proheat 1425 Series Bedienungsanleitung

Panasonic

Panasonic MC-YL637S147-AE Bedienungsanleitung

LG A9 Series Bedienungsanleitung

Oreck

Oreck Cordless Captura BK51700 Series Bedienungsanleitung

Kogan

Kogan KAVACROBVWA Bedienungsanleitung

Kränzle

Kränzle VENTOS 50 ID Benutzerhandbuch

NEFF

NEFF N17XH10 0 Series Bedienungsanleitung

EVVO

EVVO Ai35 Bedienungsanleitung

DeWalt

DeWalt DWH200D Bedienungsanleitung

Pontec

Pontec Pondomatic Vacuum Cleaner Bedienungsanleitung

Cleanmaxx

Cleanmaxx PC-P007E Bedienungsanleitung

RIDGID

RIDGID WD1685AU0 Bedienungsanleitung

Ezviz

Ezviz RE4P Bedienungsanleitung

STG global

STG global TANVAC HDV3000 Bedienungsanleitung

Shark

Shark ROTATOR PRO COMPLETE NV550 Series Bedienungsanleitung

Factory

Factory M3340 Bedienungsanleitung

Shop-Vac

Shop-Vac VN92 SERIES Bedienungsanleitung

Nobles

Nobles 608669 Produkthandbuch