Hoover DIAL-A-MATIC 1130 Bedienungsanleitung

Instructions for

YOUR

NEW

HOOVER

DIAL-A-MATIC

CLEANER

&&.&

rnQ

OPENINGFOR

HANGING

CLEANER IN

STORAGE AREA

ON/OFFSWlTCH

HANDLE

-GRIP

COVERLATCH

NOZZLE

HOSE-

CARRYING HAND

ADJUSTMENT

LEVER

ILE

TO ATTACH HANDLE TO CLEANER

Remove tape and screw from h an d 1 e s o c k e t. Set screw aside for

later use.

3. Connect electric plug from bottom of handle to electric plug projecting

from handle socket. Make sure plug assembly is positioned as shown

in illustration.

3. Push handle into place in handle socket. The excess wire and electric

plugs are guided into handle tube.

4. Line up holes in handle and handle socket. Insert screw and tighten

with screwdriver. Be sure that screw is tightened securely.

HANDLE

ADJUSTMENTS

The handle on your clean-

er has three positions

storage, operating,

and

low (for reaching under

low furniture). The handle

can be lowered by step-

ping on pedal at the left

rear of cleaner.

The

handle should always be

in storage position when

cleaning tools are used.

THIS IS THE

“HEART”

OF YOUR NEW

HOOVER

DIAL-A-MATIC

CLEANER

FIG.

YOUR NEW HOOVER DIAL-A-MATIC IS THE MOST

POWERFUL UPRIGHT CLEANER EVER BUILT.

To handle the wide range of pile depth of modern carpets

and rugs we have provided you with TWO

(2)

adjustable

features. When used properly, they will assure the best

cleaning efficiency and ease of operation.

NOTE: It is recommended that the cleaner be operated

only on dry carpet.

SUCTION ADJUSTMENT (Fig.

Set the dial to MEDIUM. This will be the correct setting

for the majority of rugs. If your HOOVER cleaner seems

hard to push, move the dial toward the LOW position. For

low pile, sculptured or multi-level rugs it may be necessary

to move the lever toward HIGH for most effective cleaning.

NOTE: Be certain d i a I indicator points to desired

suction

-- not to the neutral area between car-

pet and tool suction.

NOZZLE ADJUSTMENT

(Fig. 2

On the front of your

Dial-A4atic

is an easy-to-use nozzle adjust-

ment lever. It is marked: SHAG;

NORMAL; INDOOR/OUTDOOR.

(see Fig.

‘.

”

.’

FIG. 2

Set the lever at SHAG for all

long pile loosely woven car-

pets or rugs.

Use the NORMAL setting for

all carpets or rugs with a

tightly woven pile.

The INDOOR/OUTDOOR set-

ting should be used for all

floor coverings that have a

very flat surface pile. . . or

are cemented to the floor.

FIG. 3

FOR BEST RESULTS, TIP THE CLEANER BACK ON ITS

REAR WHEELS AND ADJUST THE LEVER BY

HAN&

(FIG. 2)

NOTE: When removing loose dirt from hard surface

floors, adjust the cleaner to the NORMAL position. The

INDOOR/OUTDOOR setting on the c 1 e a ne r lowers’ the

nozzle to the carpet for effective cleaning of INDOOR/

OUTDOOR carpet. However, be certain to change the rug

position when cleaning normal or shag pile carpet. If the

INDOOR/OUTDOOR setting is used when cleaning normal

or shag pile carpet, there is an increase in the belt load

and pushing effort is greatly increased.

SET THE DIAL FOR CLEANING TOOLS

The handle of the cleaner should be in Storage

POSitiOn

(see Page I) when cleaning to o I

are used. When the

handle is in this position, the nozzle is raised and the

agitator does not come in contact with the rug.

Attach hose and cleaning tools (Page

6).

Set lever on Suc-

tion Control Dial to “HIGH” under “TOOL SUCTION” for

most cleaning. For cleaning draperies and delicate fabrics,

move lever toward

“

LOW’

The lever can be placed at “HIGH”, “MEDIUM”, “LOW”

or any space between these markings.

THE CLEANING TOOLS

(See Page 4 for setting Suction Control Dial when using tools.)

The cleaning tools have many uses. Some are listed below:

TUFFLEX HOSE Double vinyl reinforced with nylon mesh for

long, trouble-free life. The light flexible hose has a vinyl tab,

so it can be hung on the cleaner or on a hook in a closet.

TELESCOPING WAND When you

require extra length for cleaning

bare floors or hard-to-reach places,

attach the telescoping extension

wand.

To lengthen the wand, push in on the

plastic latch and extend wand until

it locks in place. To shorten, use

oppos

itc

procedure.

FLOOR BRUSH

For Hard Surface Floors and Carpeted Stairs.

4. UPHOLSTERY NOZZLE For Upholstered Furniture, Draperies,

Tapestries, Mattresses, Clothing, Automobile Interiors, Stairs.

DUSTING BRUSH For Carved Furniture, Table Tops, Books,

Lamps, Light Fixtures, Venetian Blinds, Registers, Baseboards.

6. CREVICE TOOL For Upholstered Furniture, Edges of

Wall-to-

Wall Carpeting, Radiators, Dresser Drawers.

TO CONNECT HOSE TO CLEANER

Insert hose connector in opening below dial. Turn hose connector

in either direction until it locks in place.

TO CONNECT TOOLS

To connect the cleaning tools to either the telescoping wand or

hose, press down on the plastic latch and fit the attachment into

place making sure the button on the attachment is locked in

place. To release, press down on plastic spring latch and remove.

TO STORE TOOLS

The vinyl tool kit has been designed

so the tools can be packed inside

and the hose attached, by strap, on

outside. The kit has two slots

located near the top for ease in

hanging on the cover latch of the

cleaner or on a hook in the closet.

While moving furniture, hose can be

conveniently hung on handle.

TO CLEAN TOOLS

To clean the hose, wipe off dirt with

a cloth, dampened with a liquid

detergent. Use a damp cloth to re-

move the detergent. Cleaning tools

can be washed in warm water with a

detergent. Rinse and let dry before

using.

HELPFUL HINTS

EASY TO CARRY

Use the convenient carrying handle for

carrying your Hoover cleaner. (See Fig.

When lifting the cleaner from one surface

to another, lift it as shown in Fig. 2.

DON’T PICK UP TACKS

Hard, sharp objects should not be picked

up by the cleaner. They may damage the

hose and the throw-away bag.

TAKE CARE OF CORD

Wind it loosely, on cover latch and knob

on Suction Control Dial, to avoid strain,

Snap clip-on plug onto cord. To remove

cord, turn cover latch. (See inset.) Don’t

run cleaner over the cord- it may damage

the insulation.

THE BAG INDICATOR

The bag indicator, “CHECK BAG”,

located on the front of the c 1 e a ne r,

makes it convenient for you to know

when the disposable bag s ho u 1 d be

changed. The indicator will disappear

when the motor is turned on and the

Dial-

A-Matic

is used for cleaning carpets. If

the “CHECK BAG” indicator appears

when the cleaner is being used on car-

pets, the cleaner is not operating satis-

factorily. You should:

1. Replace bag. (See Page 9.) In some

cases the bag may not be filled to

capacity; but, d

e to variation in

size and type of dirt particles, the

bag has ceased to filter satisfactorily.

2. Check secondary filter. (See Page 8.)

3. Check nozzle hose. (See Page 8.)

Note: The “CHECK BAG” indicator may

be visible when cleaning tools are used.

This does not necessarily mean that the

cleaner is not operating satisfactorily.

This can be checked by turning the dial

to CARPET SUCTION p o s it i on and

checking the indicator. If it disappears,

the bag does not need to be replaced.

THE THROW-AWAY BAG

To assure that your Hoover cleaner

operates at peak performance it is

imperative that you use only gen-

uine Hoover Throw-Away Filter

Bags

made by The Hoover

Company. Genuine Hoover Bags

can be identified by the

Hoover Medallion. These

bags are made from a

(-jOJ@

special material

which

is scientifically formulated to

filter out dust while allowing air

to flow through freely.

THE SECONDARY FILTER

The secondary filter protects the

motor from dirt. Before installing a

new bag, check the filter. Dirt

spilled in the bag housing will

accumulate on the filter and may

restrict motor performance. To clean

filter, remove wire holder and lift

out filter. Tap against a hard sur-

face, or rinse thoroughly with

warm water and dry. Replace in bag

housing and secure with holder.

THE NOZZLE HOSE

The nozzle hose on the cleaner

carries the dirt from the nozzle to

the throw-away bag. If the hose

becomes obstructed, remove it and

clear it. Pull the hose end from the

bottom of the bag housing and

unscrew the hose end by turning in

a clockwise direction. Turn clean-

er over, remove the bottom plate

(see Page

10)

and pull hose from

cleaner. Clean hose and reinsert

it in the cleaner.

WHERE TO BUY BAGS

Throw-away bags may

purchased at your local

Authorized Hoover Dealer

(listed in Yellow Pages of

Telephone Directory under

“Vacuum

Cleaners”-

Hoover) or f r o m Hoover

Factory S e r v i c e

Stations

listed on service page of

this book.

When ordering throw-away

bags,

be sure to mention

the model of your cleaner.

TO REPLACE THROW-

AWAY BAGS

Tip cleaner over, resting handle

on the floor. Open bag cover of

cleaner by turning latch in either

direction. Lift bag cover. Hold

throw-away bag by cardboard cover,

twist outward, and remove. Discard

used bag.

To attach new throw-away bag,

hold bag with cardboard collar

down and with arrows pointing

toward front of cleaner. Push hole

cardboard firmly over tube,

twisting until bag is secure. Be

sure that throw-away bag is not

extending outside of cover and

that cover is in proper position

on the gasket before latching.

THE BELT

The belt of your Hoover cleaner

controls the speed of the agitator

and is important for the efficient

operation of your cleaner. Because

of this, when buying a new belt,

you should always insist on a gen-

uine Hoover belt. Some other belts

on the market, not manufactured

under Hoover design and quality controls, do not operate the agitator

correctly and create undue stress which will damage your Hoover

cleaner.

WHEN TO REPLACE BELT

Remove bottom plate from cleaner (see Fig.

and check from time

to time to be sure the belt is in good condition. If it is stretched or

cut, it should be replaced.

Inhaltsverzeichnis

Andere Hoover Staubsauger Handbücher

Hoover

Hoover HU87-TA-ZA Installationsanleitung

Hoover

Hoover UH70805RM Bedienungsanleitung

Hoover

Hoover SH40040 Bedienungsanleitung

Hoover

Hoover PUREPOWER Bedienungsanleitung

Hoover

Hoover CH53000 Bedienungsanleitung

Hoover

Hoover WindTunnel U6434-900 Bedienungsanleitung

Hoover

Hoover React Professional Bedienungsanleitung

Hoover

Hoover ALYX Bedienungsanleitung

Hoover

Hoover BV20PAR Bedienungsanleitung

Hoover

Hoover Guardsman C1631 Bedienungsanleitung

Hoover

Hoover Telios TTE2203 Bedienungsanleitung

Hoover

Hoover Robocom 2 Bedienungsanleitung

Hoover

Hoover Commercial WindTunnel Bedienungsanleitung

Hoover

Hoover PurePower Greenray Bedienungsanleitung

Hoover

Hoover Twist & Vac Hand-held Vacuum Cleaner Bedienungsanleitung

Hoover

Hoover S3670 - WindTunnel Bagged Canister Vacuum... Kurzanleitung zur Einrichtung

Hoover

Hoover S5615 Bedienungsanleitung

Hoover

Hoover Ultra Bedienungsanleitung

Hoover

Hoover freemotion Bedienungsanleitung

Hoover

Hoover MPWR 40V CH93619 Bedienungsanleitung

Hoover

Hoover TELIOS CYCLONIC Bedienungsanleitung

Hoover

Hoover F5505 - Steam Vac Spot Convertible Bedienungsanleitung

Hoover

Hoover HU71 Bedienungsanleitung

Hoover

Hoover Hydropower Bedienungsanleitung

Beliebte Staubsauger Handbücher anderer Marken

Bissell

Bissell LittleGreen Proheat 1425 Series Bedienungsanleitung

Panasonic

Panasonic MC-YL637S147-AE Bedienungsanleitung

LG A9 Series Bedienungsanleitung

Oreck

Oreck Cordless Captura BK51700 Series Bedienungsanleitung

Kogan

Kogan KAVACROBVWA Bedienungsanleitung

Kränzle

Kränzle VENTOS 50 ID Benutzerhandbuch

NEFF

NEFF N17XH10 0 Series Bedienungsanleitung

EVVO

EVVO Ai35 Bedienungsanleitung

DeWalt

DeWalt DWH200D Bedienungsanleitung

Pontec

Pontec Pondomatic Vacuum Cleaner Bedienungsanleitung

Cleanmaxx

Cleanmaxx PC-P007E Bedienungsanleitung

RIDGID

RIDGID WD1685AU0 Bedienungsanleitung

Ezviz

Ezviz RE4P Bedienungsanleitung

STG global

STG global TANVAC HDV3000 Bedienungsanleitung

Shark

Shark ROTATOR PRO COMPLETE NV550 Series Bedienungsanleitung

Factory

Factory M3340 Bedienungsanleitung

Shop-Vac

Shop-Vac VN92 SERIES Bedienungsanleitung

Nobles

Nobles 608669 Produkthandbuch