Hoover Evo VE18LIG Bedienungsanleitung

USER MANUAL

- 2 -

IMPORTANT SAFETY REMINDERS

This appliance should only be used for domestic cleaning, as

described in this user guide. Please ensure that this guide is

fully understood before operating the appliance.

Do not leave the appliance plugged in. Always switch off and

remove the plug from the socket after charging, or before

cleaning the appliance or any maintenance task.

This appliance can be used by children aged from 8 years and

above and persons with reduced physical, sensory or mental

capabilities or lack of experience and knowledge if they have

been given supervision or instruction concerning use of the

appliance in a safe way and understand the hazards involved.

Children shall not play with the appliance. Cleaning and user

maintenance shall not be made by children without supervision.

If the charger cable is damaged stop using the appliance

immediately. To avoid a safety hazard, replace with a genuine

spare part.

Keep hands, feet, loose clothing and hair away from rotating

brushes.

Use only the original charger supplied with the appliance.

Check that your supply voltage is the same as that stated

on the charger.

This appliance is supplied with a double insulated battery

charger which is only suitable for insertion in a 230V (UK

240V) socket outlet.

Plug the charger in to suitable socket outlet and connect

the charger jack plug to the appliance.

For rst use, charge the battery pack for 5.5 hours.

To charge the battery pack, detach it from the cleaner

by pressing the battery pack release button and plug the

charger into the charging port located on the battery pack.

The battery pack can also be charged when inserted into

the cleaner.

Ensure that the cleaner is switched off during charging.

When the charger is connected, the battery LED lights

on the battery pack will illuminate in turn as the battery

charges, until all four lights are illuminated.

Once fully charged, the four LED lights will remain lit and

will turn off after 5 minutes.

Re-connect the appliance to the charger after use to

recharge the battery.

Never charge the batteries in temperatures above 45°C or

below 0°C.

It is normal for the charger to become warm to the

touch when charging. When charging the cleaner, it will

automatically turn off.

Do not unplug the charger by pulling on the power cord.

Unplug the charger in the event of prolonged absence

(holidays, etc.).Recharge appliance again before use as

batteries may self discharge over increased periods of

storage.

If the appliance is to be disposed of the batteries must rst

be removed. The appliance must be disconnected from the

supply mains when removing the battery. Dispose of the

batteries safely. Run the appliance until it stops because

the batteries are fully discharged. Used batteries should

be taken to a recycling station and not disposed of with

household waste. To remove the batteries, please contact

the Hoover Customer Centre or proceed according to the

following instructions.

- 1 -

- 2 -

IMPORTANT SAFETY REMINDERS

- 2 -

IMPORTANT: Always fully discharge the batteries before

removal and ensure the charger is unplugged.

Run the cleaner until the batteries are completely empty.

Remove the charger jack plug from the appliance.

Push the battery release button to eject the battery pack.

Remove the battery pack slowly from the slot.

NOTE: Should you experience any difculty in dismantling

the unit or for more detailed information on treatment,

recovery and recycling of this appliance, please contact

your local city ofce or your household waste disposal

service.

Do not replace the batteries with non-rechargeable

batteries.

Use only attachments, consumables or spares recommended

or supplied by Hoover.

When using cleaning tools ensure that the appliance is kept in

the upright (parked) position. This will avoid possible damage

to the carpet or floor covering. When cleaning stairs, do not

position the appliance above you.

Static electricity: some carpets can cause a small build up

of static electricity. Any static discharge is not hazardous to

health.

Do not use your appliance out of doors or on any wet surface

or for wet pick up.

Do not pick up hard or sharp objects, matches, hot ashes,

cigarette ends or other similar items.

Do not spray with or pick up flammable liquids, cleaning fluids,

aerosols or their vapours.

Do not run over the power cord when using your appliance or

remove the plug by pulling on the power cord.

Do not continue to use your appliance if it appears faulty.

Hoover service: To ensure the continued safe and efficient

operation of this appliance we recommend that any servicing

or repairs are only carried out by an authorised Hoover service

engineer.

Do not stand on or wrap the cord around arms or legs when

using your appliance.

Do not use the appliance to clean animals or people.

When using the cleaning tools, ensure to always steady the

appliance with your other hand. This will ensure that the

appliance does not fall while in use.

The Environment

The symbol on this appliance indicates that this appliance may not

be treated as household waste. Instead it must be handed over to the

applicable collection point for the recycling of electrical and electronic

equipment. Disposal must be carried out in accordance with local

environmental regulations for waste disposal. For more detailed

information about treatment, recovery and recycling of this appliance, please

contact your local city office, your household and waste disposal service or

the shop where you purchased the appliance.

This appliance complies with the European Directives 2014/35/EU,

2014/30/EU and 2011/65/EU.

CANDY HOOVER GROUP S.r.l. Via Privata Eden Fumagalli, 20861

Brugherio (MB) Italy

BATTERY

LEVEL

STATUS

Effortless

cleaning

with your

new Hoover PRE-MOTOR

FILTER

BATTERY

PACK

BATTERY RELEASE

BUTTON

NOZZLE

LOOP HANDLE*

EXHAUST

FILTER GRILLE

DUST BIN

BIN HANDLE

CHARGING

STATUS

BUTTON

LED LIGHT

INDICATORS

CHARGING

PORT

BIN RELEASE

BUTTON

METAL TUBE

MINI TURBO NOZZLE*

EXTENSION HOSE

EXTENSION TUBE*

LONG CREVICE TOOL*

WHEELS

EXTENSION

HOSE SOCKET

2 IN 1

DUSTING

& CREVICE

TOOL

HOSE TO

EXTENSION

BRUSH BAR SWITCH

TURBO MODE

SWITCH

GETTING TO KNOW YOUR CLEANER

- 3 -

* Certain models only

MAIN POWER

ON/OFF SWITCH

PREPARING YOUR CLEANER

Insert the main handle in the

cleaner body and then adjust

handle up/down to the desired

height.

Insert the battery pack by pushing

it into the cleaner slot ensuring it

is xed in position, you will hear a

click when fully located.

Assemble the mini turbo brush

holder to the handle tube of

the cleaner, t the mini turbo

nozzle to the holder.*

Fit the 2 in1 Dusting & Crevice

tool to the cleaner.

Insert the long crevice into the

extension tube and t to the

cleaner.

ACCESSORY STORAGE & ASSEMBLY*

SWITCH

Twist the handle to manoeuvre under or around

furniture.*

- 4 -

* Certain models only

1. Main Power On/Off Switch

The Product will always start

working in standard mode when

you press the ON/OFF button.

2. Turbo Mode Switch

To enable turbo mode press

turbo power button for deep

clean.

3. Brush Bar Switch

Press the brush bar on/off

button at the top of the unit.

Brush Bar ON - recommended

for carpets.

Brush Bar OFF - suitable for

hard floors.

Always ensure the battery

has sufficient electrical

charge by pressing the

charging status button prior

to use.

CLEANER RELEASE

Recline to unlock the cleaner

CHARGING/DISCHARGING

WARNING: Do not try to open the battery pack and repair it by yourself.

Dispose of the batteries safely. Used batteries should be taken to a recycling

station and not disposed of with household waste.

1. Discharging

Check the remain capacity status by pressing the charging

status button on the battery pack.

LED Indication signal

○○○● <15%, ashing

○○●● 15%~25%

○●●● 26%~50%

●●●● 51%~75%

●●●● 76%~100%

IMPORTANT: Always ensure battery has sufcient battery

charge before use.

Charge your cleaner immediately if one LED light is ashing

(remaining capacity<15%).

2.Charging

To charge the battery you can connect the charger plug to the

battery pack directly when it is in the appliance or you can

remove the battery pack from the appliance by pressing the

battery release button, this allow you to charge the battery

pack only. It will take around 5.5 Hrs from full discharge to fully

recharge the battery.

During the charging process you will see the charge level

indicated by the LED on the battery pack. If the battery charge

level is below 25% you will see the rst LED blink until it

reaches above 25% , then it will stay illuminated .This process

will continue on all four point of the LED indicating level of

battery charge 25%, 50% , 75% ETC. When the battery charge

has reached 100% all 4 points will be illuminated.

BATTERY LEVEL INDICATOR :

○○○● <15%, ashing

○○●● 15%~25%

○●●● 26%~50%

●●●● 51%~75%

●●●● 76%~100%

The LED light will keep ashing during the charging process

and will turn off 5 minutes after the battery has been fully

charged.

IMPORTANT: The appliance on/off switch must always be in

the OFF position during charging.

Use only the charger supplied with your cleaner to recharge.

It is normal for the charger to become warm to the touch

when charging.

NOTE: To optimise your battery performance you should fully charge your battery

on a regular basis or at least once per year.

- 5 -

* Certain models only

CLEANING TOOLS

IMPORTANT! When using cleaning tools, the cleaner must

be kept in the upright position, particularly when cleaning

stairs. Hold unit while using hose or handle tube.

Plug in the long stretch hose to

the hose extension socket.

Remove handle tube. Connect the hose to handle tube.

Choose your accessory and connect it

to the handle tube.

All accessories can be tted directly onto the hose, handle and handle tube. Combine

accessories depending on use.

3.Battery Pack Use

a. Insert the battery pack by pushing it into the cleaner slot ensuring it is xed in

position, you will hear a click when fully located.

When the product is turned on the LED light will illuminate automatically.

b. Push the battery release button to release the battery pack.

c. Pull the battery pack slowly from the slot.

d. Remove the battery pack to recharge or replace with the new battery pack.

Choose your accessory and

connect it to hose.

Connecting accessories to Handle Tube

Connecting accessories to Hose

CLEANING THE PRE MOTOR FILTERS

Rotate the upper part of the dust bin to open.

1Take out the pre-motor lter.

Gently tap both lters to release

any excess dust.

3Wash both lter and sponge under warm water until

the water runs clean. Remove excess water by

shaking and leave to dry for 24 hours. Reassemble

and ret lters to cleaner, only when they are

completely dry.

- 6 -

<40

EMPTYING THE BIN

!IMPORTANT: Before emptying the bin, make

sure vacuum cleaner has been switched off.

To remove the bin from the cleaner press the

bin release button.

Hold the container over the Bin and press

the easy open button.

The container release flap will open and

you can empty the debris into the waste

bin with no dust contact.

Once emptied, gently tap or shake the

container to release any excess dust.

Do not overfill the bin above the max level

line.

CLEANING THE STAIRS

It is dangerous to place the cleaner above you when

cleaning stairs.

Ensure it is always operated in an upright position.

IMPORTANT! When using cleaning tools, the cleaner must

be kept in the upright position, particularly when cleaning

stairs. Hold unit while using hose or handle tube.

CHANGING THE BELT OR BRUSHES CLEARING A BLOCKAGE

If your cleaner is not picking up efciently, the belt or brushes (or both) may need replacing, but rst

please make sure you have:

• Emptied the bin

• Cleaned the lters

• Checked for blockages

Turn the cleaner over and remove 2 rear

rollers and 2 retaining screws.

Remove the brush guard.

Hold the brush assembly and stretch the

belt until the brush can be slotted back

into the cleaner housing.

Rotate the brush to ensure free movement

of the belt.

Refit the brush guard with 2 retaining screws

and 2 rear rollers..

1 4

Check the cleaning

tools and hose for

blockages.

The hose can be

removed at both ends.

Turn the cleaner

over and rotate the

brushes to identify

any obstructions

including hair.

Check for a blockage in

the hose socket. Use a

flexible rod to remove

any obstruction.

- 7 - *Certain models only

Remove brush assembly and check for

wear on the belt.

Loop the new belt around the

motor and brush channel.

NOTE: If the brush gets blocked and stops rotating, switch off the cleaner, remove the battery pack

from the cleaner and clear the blockage. If the brush has hair or thread wrapped around it, use

scissors to clear.

IMPORTANT: Ensure the cleaner is

switched off, and remove the battery pack

from the cleaner before attempting any

maintenance.

IMPORTANT: Ensure the cleaner is

switched off, and remove the battery pack

from the cleaner before attempting any

maintenance.

- 8 -

User checklist

If your cleaner is not working properly run through the

following checklist.

1. Is there enough charge in the battery to operate the cleaner?

Check by pressing the charge status button, see User Manual P4.

2. Is the bin full or choked with fine dust?

To empty the bin, see the User Manual on P6.

3. Is the hose blocked?

To clear a blockage, see the User Manual on P7.

4. Is there a blockage in the cleaner base?

To clear a blockage, see the User Manual on P7.

5. Are the filters blocked?

To clean filters, see the User Manual on P6.

6. Are the brushes rotating correctly?

To check the brushes, see the User Manual on P7.

If there is any doubt call the Hoover Service Office for advice. They may be able

to assist you over the telephone. A service charge will be made if the cleaner is

examined and found to be in working order, has not been assembled in accordance

with these instructions or has been used incorrectly.

The battery cannot be charged?

1. No LED light.

This may be a result of very long storage periods (over one year). Contact Hoover

customer service to arrange battery replacement.

2.○●○● flashing 30seconds.

This may be over charge current protection.

Please only use the charger supplied with your cleaner to recharge.

You need remove charger, turn on product, then charge function will reset.

3.●○○● flashing 30seconds.

This may be Incorrect charger plugged in.

Use only the charger supplied with your cleaner to recharge.

You need remove charger, turn on product, then charge function will reset.

IMPORTANT INFORMATION

Hoover Service

Should you require service at any time, please contact your local Hoover Service

Office.

Hoover spares and Consumables

Always replace parts with genuine Hoover spares. These are available from your

local Hoover dealer or direct from Hoover. When ordering parts always quote

your model number.

GUARANTEE STATEMENT

The guarantee conditions for this appliance are as defined by our representative in

the country in which it is sold. Details regarding these conditions can be obtained

from the dealer from whom the appliance was purchased. The bill of sale or receipt

must be produced when making any claim under the terms of this guarantee.

IMPORTANT: The battery in this cleaner is guaranteed for 1 year from the date of

purchase. After 1 year the customer is liable for the cost of a new battery.

Subject to change without notice.

Quality

Hoover’s factories have been independently assessed for quality. Our products

are made using a quality system which meets the requirements of ISO 9001

IMPORTANT: Do not run cleaner over the charger cable as this could damage the

charger cable insulation.

PRINTED IN P.R.C.

48022782

Inhaltsverzeichnis

Andere Hoover Staubsauger Handbücher

Hoover

Hoover ONEPWR Blade+ Bedienungsanleitung

Hoover

Hoover SP48DRB6 Bedienungsanleitung

Hoover

Hoover U5467900 Bedienungsanleitung

Hoover

Hoover SteamVac F5808 Bedienungsanleitung

Hoover

Hoover SYRENE SR71 Bedienungsanleitung

Hoover

Hoover ATHEN Bedienungsanleitung

Hoover

Hoover Athen Evo Bedienungsanleitung

Hoover

Hoover SteamVac Dual V Bedienungsanleitung

Hoover

Hoover FloorMate, SpinScrub Floor Mate Spin Scrub Hard Floor... Bedienungsanleitung

Hoover

Hoover FH40150 Series Bedienungsanleitung

Hoover

Hoover H-HANDY 700 Bedienungsanleitung

Hoover

Hoover TurboPOWER WindTunnel S3646 Bedienungsanleitung

Hoover

Hoover FH50035 - SteamVac Carpet Cleaner Bedienungsanleitung

Hoover

Hoover FD22HH Bedienungsanleitung

Hoover

Hoover UH70035B - WindTunnel Cyclonic Upright... Bedienungsanleitung

Hoover

Hoover U5175900 - Fold Away Widepath Upright Vacuum... Bedienungsanleitung

Hoover

Hoover HSV600C Installationsanleitung

Hoover

Hoover POWERSCRUB XL Bedienungsanleitung

Hoover

Hoover WR71WR01001 Bedienungsanleitung

Hoover

Hoover Elite Supreme S1211 Bedienungsanleitung

Hoover

Hoover SteamVac F6026910 Bedienungsanleitung

Hoover

Hoover U4093 Bedienungsanleitung

Hoover

Hoover Deluxe Bedienungsanleitung

Hoover

Hoover H-FREE Bedienungsanleitung

Beliebte Staubsauger Handbücher anderer Marken

Bissell

Bissell LittleGreen Proheat 1425 Series Bedienungsanleitung

Panasonic

Panasonic MC-YL637S147-AE Bedienungsanleitung

LG A9 Series Bedienungsanleitung

Oreck

Oreck Cordless Captura BK51700 Series Bedienungsanleitung

Kogan

Kogan KAVACROBVWA Bedienungsanleitung

Kränzle

Kränzle VENTOS 50 ID Benutzerhandbuch

NEFF

NEFF N17XH10 0 Series Bedienungsanleitung

EVVO

EVVO Ai35 Bedienungsanleitung

DeWalt

DeWalt DWH200D Bedienungsanleitung

Pontec

Pontec Pondomatic Vacuum Cleaner Bedienungsanleitung

Cleanmaxx

Cleanmaxx PC-P007E Bedienungsanleitung

RIDGID

RIDGID WD1685AU0 Bedienungsanleitung

Ezviz

Ezviz RE4P Bedienungsanleitung

STG global

STG global TANVAC HDV3000 Bedienungsanleitung

Shark

Shark ROTATOR PRO COMPLETE NV550 Series Bedienungsanleitung

Factory

Factory M3340 Bedienungsanleitung

Shop-Vac

Shop-Vac VN92 SERIES Bedienungsanleitung

Nobles

Nobles 608669 Produkthandbuch