Hoover Vacuum Cleaners Bedienungsanleitung

The HOOVER vacuum cleaner you have just purchased is a combina-

tion cleaner. It has a motorized power nozzle for carpet and floor

cleaning and has cleaning tools for above the floor cleaning.

Your cleaner is a model no.

and has a serial number

For your personal records, please enter the model number and serial

number in the spaces provided above and retain in a safe place.

The model number and serial number appear on the bottom of the

cleaner.

Save!

Index

Assembling Cleaner ..........................

.56

Cleaner Description .......................... .3-4

How to Use

Cleaning Tools ............................. .8-9

Power Nozzle ...............................

If You

Havea

Problems ........................ .18

Lubrication .................................

..I

Maintenance

Cleaning Secondary Filter. ................... .13

Clearing Obstructions .......................

.I2

Replacing Agitator Brushes ............... .16-17

Replacing Bag ............................

lo-12

Replacing Belt. .......................... .13-15

Storing Cleaner .............................

.9-IO

1975,

1978,

1989

The

Hoover Company

Important Safeguards!

Read all instructions.

Warning: Electric shock could occur if used outdoors or on wet sur-

faces.

Close supervision is necessary when any appliance is used by or

near children. Do not allow vacuum cleaner to be used as a toy or to

run unattended at any time.

Keep hands, feet, loose clothing, and hair away from rotating

agitator. Do not operate the cleaner in bare feet or when wearing

open toe shoes or sandals.

Don’t run power nozzle over cord. It may damage insulation.

Do not use cleaner to pick up matches, or live ashes and cigarette

butts.

Avoid picking up hard, sharp objects with the cleaner. They may

damage the cleaner and the bag.

Unplug cleaner when not in use. Turn machine off at switch before

unplugging.

Always disconnect cord from electrical outlet before servicing the

cleaner.

Change bag frequently when picking up very fine materials such as

powder.

Grasp the plug to disconnect from wall outlet to avoid damage to

cord, plug, prongs, or receptacle.

The use of an extension cord is not recommended.

If cleaner is in disrepair, do not attempt to operate.

Have repairs made by the qualified personnel at Hoover Factory

Service Centers or Authorized Hoover Warranty Service Dealers.

Use vacuum cleaner only for its intended use as described in the in-

structions. The use of attachments not recommended by the appli-

ance manufacturer may cause hazards.

Save these instructions!

Quality

prr!Y.Fts

Employee

Participation

Unpacking

Unpack the cleaner from the

carton and identify the parts

shown below. Remove and dis-

pose of the cardboard packing.

A. Canister cleaner

B. Power nozzle

C. Throw away bag

D. Extension wands, cleaning

tools and hose.

The cleaner assembled will look

like the drawing below.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

Power Nozzle automatically adjusts to different carpet pile heights.

Casters provide easy towing; pull cleaner using hose to guide the

cleaner over carpet, area rugs and door sills.

Hose

Cord

Connection to Cleaner

is made by plugging hose cord into

cleaner base at receptacle.

Furniture Guard

ON-OFF Switch is a convenient foot operated switch on top of the

cleaner.

Tool Storage on top of cleaner is for storing furniture nozzle, dusting

brush, wall/floor brush and crevice tool.

Crevice Tool

Cord Storage Hook

Wall/Floor Brush

Dusting Brush

Furniture Nozzle

Spring Latch

locks extension wands.

Extension Wands connect to hose and power nozzle or cleaning tools.

Cover Latch

Carrying Handle

Suction Regulator should be closed for full suction. Open regulator for

easy cleaning of some types of carpet, lightweight flexible rugs and light-

weight draperies.

Cord Clips clip nozzle cord to extension wands.

Nozzle Cord Connection to Handle

is made by plugging nozzle cord

into receptacle underneath the handle.

Plastic Latch Ring

rotates to lock handle to extension wands or clean-

ing tools.

Handle is on end of hose for use with extension wands or cleaning tools.

Operate cleaner only at voltage specified on data plate on bottom

of cleaner.

How to assemble

1. Connect hose

To connect hose, insert hose into

opening of cleaner lining up the

arrow on the hose with the dot

on the cleaner. Turn the hose

clockwise until the arrow lines up

with the bar on the cleaner and

latch locks into place.

When the hose is attached prop-

erly, the hose cord plug will reach

to the receptacle on the cleaner.

Insert the plug firmly and as deep

into the receptacle as possible.

To disconnect hose, first remove

hose cord plug from receptacle.

Then, depress latch away from

hose connection opening in

cleaner. While holding latch, turn

the hose counterclockwise until

the arrow lines up with dot on the

cleaner. Remove hose.

2. Attach power nozzle

Attach power nozzle at the end

of the straight wand by fitting the

button projection on the nozzle

connector into the opening at the

end of the wand. Be sure the

nozzle is locked in place.

To release, press down on the

center of the spring latch.

Attach the curved wand to the

straight wand. Position cord into

cord clips on extension wands,

placing excess cord between

nozzle and bottom cord clip.

To attach the hose to the exten-

sion wands, rotate the plastic

latch ring on the handle to accept

the button projection on the

curved wand.

Push the handle over the wand

so that the button projection fits

into the slot. Turn the latch ring

to lock the wand in place.

Connect nozzle power cord to

receptacle underneath handle.

3. Position tools

Place tools on top of cleaner by

pushing tool down securely into

the appropriate socket.

How to use

Power Nozzle

Handle adjustment

The handle has two positions

when used with the power noz-

zle: Upright and Operating.

To lower handle to the Operating

position, place your foot on the

power nozzle and push the han-

dle down.

Automatic nozzle

adjustment

The power nozzle adjusts auto-

matically to effectively clean hard

surface floors and all carpet from

low pile to shag.

However, the nozzle is not rec-

ommended for very irregular

floor surfaces such as brick,

slate and certain parquet floors.

To clean these floors, use the

Wall/Floor Brush.

It is suggested that you use the

power nozzle with the Suction

Regulator closed for full suction.

If the power nozzle is difficult to

push, open the Suction Regula-

tor.

Edge cleaning

Brushed edge cleaning is provid-

ed on the right side of the nozzle

to remove imbedded dirt in car-

pet near baseboards and furni-

ture. Guide the right side of the

nozzle parallel to the edge of the

carpet or furniture for brushed

edge cleaning.

Standard edge cleaning is pro-

vided on the left side of the noz-

zle to remove surface dust and lit-

ter. Guide the left side of the noz-

zle parallel to the edge of the car-

pet for standard edge cleaning.

CLOSED

Cleaning

Tools

The cleaning tools have many uses. Select the tool best suited for the

cleaning task from the descriptions below. Adjust the Suction Regulator

to select the amount of suction appropriate to the cleaning task.

1. Crevice tool for radiators,

dresser drawers, spaces between

kitchen appliances.

2. Wall/floor brush for walls and

very irregular hard surface floors

such as brick and slate.

3. Furniture nozzle for upholster-

ed furniture, draperies, tapes-

tries, mattresses, clothing, auto-

mobile interiors and carpeted

stairs.

4. Dusting brush for carved fur-

niture, table tops, books, lamps,

lighting fixtures, Venetian blinds,

baseboards, shutters and regis-

ters,

To connect and

remove tools

To connect the tools, insert end

of tool into the extension wand

and snap into position. To

disconnect, press down on the

center of the spring latch and

remove tool.

Tools may also be attached to the

handle by rotating the plastic

latch ring to accept the button

projection on the tool. Then, turn

the latch ring as shown to lock

the tool in place.

To remove the tool, reverse the

above procedure.

Power cord

.’

To avoid damage to the power

cord, leave it connected to the

receptacle on the cleaner at all

times.

To clean hard to

reach areas

The tools attached to the curved

wand, as shown, will enable you

to clean many hard to reach

areas; especially crown

moldings, tops of drapery rods,

shelves, and picture frames.

To clean stairs

Clean stairs by placing the

cleaner on its side as pictured in

the illustration. Clean stairs from

bottom to top.

Storing

cleaner

Cord wrap

When cleaner is not in use, wrap

the cord around the cord storage

hook, located on the cover of the

cleaner, and the carrying handle.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Hoover Staubsauger Handbücher

Hoover

Hoover UH72450 Bedienungsanleitung

Hoover

Hoover Jazz JA1600 Bedienungsanleitung

Hoover

Hoover U4093 Bedienungsanleitung

Hoover

Hoover WindTunnel S3765040 Bedienungsanleitung

Hoover

Hoover CU81CU15001 Bedienungsanleitung

Hoover

Hoover HF522STH Bedienungsanleitung

Hoover

Hoover Impulse H2510 Bedienungsanleitung

Hoover

Hoover DIAL-A-MATIC 1100 Bedienungsanleitung

Hoover

Hoover SteamVac Aqility Bedienungsanleitung

Hoover

Hoover Carpet Cleaner Benutzerhandbuch

Hoover

Hoover PUREPOWER Bedienungsanleitung

Hoover

Hoover 5010 HERITAGE Bedienungsanleitung

Hoover

Hoover Bagless Upright Vacuum Cleaner Bedienungsanleitung

Hoover

Hoover FLOORMATE DELUXE FH40160 Series Bedienungsanleitung

Hoover

Hoover 3000 PERFORMER Bedienungsanleitung

Hoover

Hoover KS50PET Bedienungsanleitung

Hoover

Hoover Jazz Dry SM18DL4 Bedienungsanleitung

Hoover

Hoover DS22G Bedienungsanleitung

Hoover

Hoover POWER SCRUB Bedienungsanleitung

Hoover

Hoover U5194 Bedienungsanleitung

Hoover

Hoover Convertible U4039 Bedienungsanleitung

Hoover

Hoover REACT Powered Reach Lite Bedienungsanleitung

Hoover

Hoover SH40070 Bedienungsanleitung

Hoover

Hoover Twist & Vac Hand-held Vacuum Cleaner Bedienungsanleitung

Beliebte Staubsauger Handbücher anderer Marken

Bissell

Bissell LittleGreen Proheat 1425 Series Bedienungsanleitung

Panasonic

Panasonic MC-YL637S147-AE Bedienungsanleitung

LG A9 Series Bedienungsanleitung

Oreck

Oreck Cordless Captura BK51700 Series Bedienungsanleitung

Kogan

Kogan KAVACROBVWA Bedienungsanleitung

Kränzle

Kränzle VENTOS 50 ID Benutzerhandbuch

NEFF

NEFF N17XH10 0 Series Bedienungsanleitung

EVVO

EVVO Ai35 Bedienungsanleitung

DeWalt

DeWalt DWH200D Bedienungsanleitung

Pontec

Pontec Pondomatic Vacuum Cleaner Bedienungsanleitung

Cleanmaxx

Cleanmaxx PC-P007E Bedienungsanleitung

RIDGID

RIDGID WD1685AU0 Bedienungsanleitung

Ezviz

Ezviz RE4P Bedienungsanleitung

STG global

STG global TANVAC HDV3000 Bedienungsanleitung

Shark

Shark ROTATOR PRO COMPLETE NV550 Series Bedienungsanleitung

Factory

Factory M3340 Bedienungsanleitung

Shop-Vac

Shop-Vac VN92 SERIES Bedienungsanleitung

Nobles

Nobles 608669 Produkthandbuch