HP 245161-B22 - 10642 42U Rack Shock Pallet Bedienungsanleitung

Andere Handbücher für 245161-B22 - 10642 42U Rack Shock Pallet

8

Dieses Handbuch passt für folgende Modelle

1

Inhaltsverzeichnis

Andere HP Zubehör Handbücher

HP

HP C6050a Bedienungsanleitung

HP

HP 11792A Bedienungsanleitung

HP

HP Executive Tablet Pen Bedienungsanleitung

HP

HP Workstation x1000 Handbuch

HP

HP 8NN78AA ABB Bedienungsanleitung

HP

HP L1520 - 15 Inch LCD Monitor Bedienungsanleitung

HP

HP CC487-91209 Montage- und Wartungsanleitung

HP

HP Digital Pen 250 Bedienungsanleitung

HP

HP L1510 - 15 Inch LCD Monitor Bedienungsanleitung

HP

HP 245161-B22 - 10642 42U Rack Shock Pallet Bedienungsanleitung

HP

HP Aruba UXI G Series Montageanleitung

HP

HP 8691B Service-Handbuch

HP

HP AA979A - StorageWorks SAN Switch 2/8V Bedienungsanleitung

HP

HP xp8000 - Digital Projector Anleitung zur Verwendung

HP

HP MPP 1.51 Bedienungsanleitung

HP

HP Support Anywhere Bedienungsanleitung

HP

HP MSM415 Bedienungsanleitung

HP

HP E1399A Bedienungsanleitung

HP

HP Kayak XA-s Series 02 Bedienungsanleitung

HP

HP Model 744 - VME Workstation Referenzhandbuch

HP

HP HSA-M001S Bedienungsanleitung

HP

HP Model 744 - VME Workstation Referenzhandbuch

HP

HP 245161-B22 - 10642 42U Rack Shock Pallet Bedienungsanleitung

HP

HP Scanjet 5370C Series Bedienungsanleitung

Beliebte Zubehör Handbücher anderer Marken

Hillco

Hillco 2810 Bedienungsanleitung

Siemens

Siemens QSA2700D Bedienerhandbuch

Contours

Contours ZY024 Bedienungsanleitung

Saivod

Saivod VS621 Bedienungsanleitung

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Bedienungsanleitung

Z-Wave

Z-Wave HSD-200Z Bedienungsanleitung

turck

turck FMX-IM-2UPLI63FX Bedienungsanleitung

Decagon Devices

Decagon Devices 10HS Bedienungsanleitung

UPPAbaby

UPPAbaby Cup Holder Bedienungsanleitung

Elko

Elko SmartSensor Leakage Wireless Bedienungsanleitung

Grizzly

Grizzly H8371 Bedienungsanleitung

Panasonic

Panasonic HG-T Series Bedienungsanleitung

IFM Electronic

IFM Electronic Efector 250 Series Referenzhandbuch

Virtuox

Virtuox VirtuCLEAN 2.0 Bedienungsanleitung

DigiDesign

DigiDesign 888/24 I/O Bedienungsanleitung

PROZIS

PROZIS QUAY Bedienungsanleitung

patagonia

patagonia PSI Vest Bedienungsanleitung

SFC Energy

SFC Energy EFOY GO! Bedienungsanleitung

HP 10000 Series Rack Airflow

Optimization Kit

Installation Instructions

Overview

The HP 10000 Series Rack Airflow Optimization Kit enables you to

install foam rail gaskets into your HP 10000 G2 Series 22U, 36U,

42U, and 47U 600-mm (24 in) wide racks and into 42U 800-mm

(31 in) wide racks to improve separation between hot and cold

aisles in the data center.

Kit contents

Callout Description

1 600-mm (24 in) or 800-mm (31 in) perforated

floor gasket (1)

2 Foam rail gasket roll (4)

Installing foam rail gaskets

IMPORTANT: This option kit is only compatible with HP

racks that are 600-mm (24 in) or 800-mm (31 in) wide.

1. Cut the foam rail gasket to fit the size of your rack.

2. Insert the foam rail gasket into the rack front door on both sides

of the rack.

3. Insert the foam rail gasket into the space between the 19-in

mounting rails and the vertical frame on both sides of the rack,

with the closed cell side of the foam rail gasket facing the front

of the rack.

© Copyright 2002, 2007 Hewlett-Packard Development Company, L.P.

The information contained herein is subject to change without notice. The only

warranties for HP products and services are set forth in the express warranty

statements accompanying such products and services. Nothing herein should

be construed as constituting an additional warranty. HP shall not be liable for

technical or editorial errors or omissions contained herein.

Part Number 302980-003

J

uly 2007 (Third Edition)

4. Gently push the foam rail gasket into the space until it is flush

with the vertical frame.

Installing foam rail gaskets between racks

CAUTION: The foam rail gasket must be installed into the

rack before two or more racks can be bayed together. For

additional information on baying racks, see the HP Baying

Rack Option Kit.

If installing the foam rail gasket between racks that have a baying kit

installed, the baying bracket must be removed before the foam rail

gasket can be inserted between the racks.

1. Position the racks side by side.

2. Cut the foam rail gasket to fit the size of your rack.

3. Insert the foam rail gasket into the space between the racks

with the closed cell side of the foam rail gasket facing the front

of the rack.

NOTE: Follow steps 1 through 3 to install the foam rail

gasket into a rack that will be bayed using a 24-in.

baying bracket.

If the rack will be bayed using a 600-mm baying bracket,

rotate the foam rail gasket 90 degrees before inserting it

into the space between the racks.

4. Gently push the foam rail gasket into the space between the

racks until it is flush with the vertical frame.

5. (Optional) See the HP Baying Rack Option Kit for specific

information on baying racks.

Installing the floor gasket

1. Depending on the size of your rack, cut the floor gasket at the

perforation to reduce the length from 800-mm (31 in) to 600-

mm (24 in).

2. Remove the protective tape from the bottom edge of the floor

gasket, and apply it to the bottom of the rack with the adhesive

strip facing the front of the rack.

Installation is complete.