IBM RS/6000 7014-S00 Montage- und Wartungsanleitung

RS/6000

7014 Series IBM

Model S00 Rack

Installation and Service Guide

SA38-0550-00

First Edition (October 1997)

This edition notice applies to the Model S00 Rack Installation and Service Guide.

The following paragraph does not apply to the United Kingdom or any country where

such provisions are inconsistent with local law: THIS PUBLICATION IS PROVIDED “AS

IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING,

BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS

FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer of express or implied

warranties in certain transactions, therefore, this statement may not apply to you.

This publication could include technical inaccuracies or typographical errors. Changes are

periodically made to the information herein; these changes will be incorporated in new editions

of the publication. The manufacturer may make improvements and/or changes in the

product(s) and/or the program(s) described in this publication at any time, without notice.

It is possible that this publication may contain reference to, or information about, products

(machines and programs), programming, or services that are not announced in your country.

Such references or information must not be construed to mean that these products,

programming, or services will be announced in your country. Any reference to a specific

licensed program in this publication is not intended to state or imply that you can use only that

licensed program. You can use any functionally equivalent program instead.

Requests for technical information about products should be made to your authorized reseller

or marketing representative.

Note to U.S. Government Users -- Documentation related to restricted rights -- Use,

duplication or disclosure is subject to restrictions set forth is GSA ADP Schedule Contract with

IBM Corp.

AIX and PowerPC are trademarks of International Business Machines Corporation.

Contents

Communications Statements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . v

Federal Communications Commission (FCC) Statement ............... v

European Union (EU) Statement ............................ vi

International Electrotechnical Commission (IEC) Statement ............ vi

United Kingdom Telecommunications Safety Requirements ............ vi

Avis de conformité aux normes du ministère des Communications du Canada . vii

Canadian Department of Communications Compliance Statement ........ vii

VCCI Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vii

Radio Protection for Germany ............................. vii

Safety Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ix

Definitions of Safety Notices ............................. ix

Safety Notice for Installing or Servicing ...................... ix

About This Book .................................... xi

How to Use This Book .................................. xi

ISO 9000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xi

Related Publications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xi

Chapter 1. Reference Information . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1

Power Distribution Systems ............................... 1-1

Power Distribution Bus .................................. 1-2

Power Distribution Panel ................................ 1-6

Circuit Breaker Panel ................................. 1-13

Mounting Rails . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-18

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-19

External AC Power Cables .............................. 1-20

-48 V DC Power Cables ................................ 1-20

Chapter 2. System Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1

Observe These Safety Notices During Installation .................. 2-1

Step 1. Position the Rack ................................ 2-3

Step 2. Level the Rack ................................. 2-3

Step 3. Attach the Stabilizer and Door Guide ..................... 2-4

Step 4. Bolt Down the Rack ............................... 2-8

Step 5. Attach the Convenience Outlet Mounting Plates (Optional) ....... 2-16

Step 6. Connect the Power Distribution System .................. 2-25

Step 6.1. Connect the Power Distribution Panel .................. 2-25

Step 6.2. Connect the Circuit Breaker Panels ................... 2-30

Step 6.3. Checking Customer AC Outlets ...................... 2-32

Step 6.4. Connect the Power Distribution Bus ................... 2-34

Preface iii

Step 7. Connect Drawer and Device Cables .................... 2-35

Step 8. Power-On and Check Out the System ................... 2-35

Chapter 3. Service Inspection Guide ........................ 3-1

Chapter 4. Removal and Replacement ....................... 4-1

Safety Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1

System Shutdown Warning ............................... 4-2

Power-On Procedure with the Power Distribution Bus ................ 4-2

Power-Off Procedure with the Power Distribution Bus ................ 4-3

Power-On Procedure with the Power Distribution Panel .............. 4-4

Power-Off Procedure with the Power Distribution Panel .............. 4-8

Power Distribution Bus .................................. 4-9

Power Distribution Panel ............................... 4-11

Circuit Breaker . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-17

Circuit Breaker Panel ................................. 4-22

Front Door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-26

Chapter 5. Maintenance Analysis Procedures (MAPs) ............. 5-1

MAP 1530: Power Distribution Panel - Power MAP ................. 5-2

MAP 1550: Power Distribution Bus - Power MAP .................. 5-9

MAP 1570: Circuit Breaker Panel - Power MAP .................. 5-17

Chapter 6. Parts Information (AC Rack) ...................... 6-1

Detail 1. Covers ..................................... 6-2

Detail 2. Labels ..................................... 6-4

Detail 3. Rails and Front Bezels ............................ 6-6

Detail 4. Power Distribution Bus ............................ 6-8

Detail 5. Cable Channel ............................... 6-10

Detail 6. Power Distribution Panel Assembly ................... 6-12

Detail 7. Power Distribution Panel Interior ..................... 6-14

Detail 8. Circuit Breaker Box ............................. 6-16

Detail 9. Leveling Feet and Bolt Down Hardware ................. 6-18

Detail 10. Accessory Electrical Outlet Mounting Plates .............. 6-20

Detail 11. Power Cords ................................ 6-22

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . X-1

Reader's Comments — We'd Like to Hear From You ............. X-3

iv 7014 Model S00 Rack Installation and Service Guide

Communications Statements

The following statement applies to this product. The statement for other products

intended for use with this product appears in their accompanying documentation.

Federal Communications Commission (FCC) Statement

Note: The 7014 Model S00 been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this equipment

does cause harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged to try to

correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

Consult an authorized dealer or service representative for help.

Properly shielded and grounded cables and connectors must be used in order to

meet FCC emission limits. Proper cables and connectors are available from

authorized dealers. Neither the provider nor the manufacturer are responsible for

any radio or television interference caused by using other than recommended cables

and connectors or by unauthorized changes or modifications to this equipment.

Unauthorized changes or modifications could void the user's authority to operate the

equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) this device may not cause harmful interference, and (2)

this device must accept any interference received, including interference that may

cause undesired operation.

Responsible Party:

International Business Machines Corporation

New Orchard Road

Armonk, New York 10504

Telephone: (919) 543-2193

Communications Statements v

European Union (EU) Statement

This product is in conformity with the protection requirements of EU Council Directive

89/336/EEC on the approximation of the laws of the Member States relating to

electromagnetic compatibility. The manufacturer cannot accept responsibility for any

failure to satisfy the protection requirements resulting from a non-recommended

modification of the product, including the fitting of option cards supplied by third

parties. Consult with your dealer or sales representative for details on your specific

hardware.

This product has been tested and found to comply with the limits for Class B

Information Technology Equipment according to CISPR 22 / European Standard EN

55022. The limits for Class B equipment were derived for typical residential

environments to provide reasonable protection against interference with licensed

communication devices.

International Electrotechnical Commission (IEC) Statement

This product has been designed and built to comply with IEC Standard 950.

United Kingdom Telecommunications Safety Requirements

This equipment is manufactured to the International Safety Standard EN60950 and

as such is approved in the UK under the General Approval Number

NS/G/1234/J/100003 for indirect connection to the public telecommunication network.

The network adapter interfaces housed within this equipment are approved

separately, each one having its own independent approval number. These interface

adapters, supplied by the manufacturer, do not use or contain excessive voltages.

An excessive voltage is one which exceeds 70.7 V peak ac or 120 V dc. They

interface with this equipment using Safe Extra Low Voltages only. In order to

maintain the separate (independent) approval of the manufacturer's adapters, it is

essential that other optional cards, not supplied by the manufacturer, do not use

main voltages or any other excessive voltages. Seek advice from a competent

engineer before installing other adapters not supplied by the manufacturer.

vi 7014 Model S00 Rack Installation and Service Guide

Avis de conformité aux normes du ministère des Communications du

Canada

Cet appareil numérique de la classe B respecte toutes les exigences du Réglement

sur le matériel brouilleur du Canada.

Canadian Department of Communications Compliance Statement

This Class B digital apparatus meets the requirements of the Canadian

Interference-Causing Equipment Regulations.

VCCI Statement

The following is a summary of the VCCI Japanese statement in the box above.

This is a Class B product based on the standard of the Voluntary Control Council for

Interference from Information Technology Equipment (VCCI). If this is used near a

radio or television receiver in a domestic environment, it may cause radio

interference. Install and use the equipment according to the instruction manual.

When used near a radio or TV receiver, it may become the cause of radio

interference.

Read the instructions for correct handling.

Radio Protection for Germany

Dieses Gerät ist berechtigt in Übereinstimmung mit dem deutschen EMVG vom

9.Nov.92 das EG–Konformitätszeichen zu führen.

Der Aussteller der Konformitätserklärung ist die IBM Germany.

Dieses Gerät erfüllt die Bedingungen der EN 55022 Klasse B.

Communications Statements vii

viii 7014 Model S00 Rack Installation and Service Guide

Safety Notices

Note: For a translation of this safety notice, see the

System Unit Safety Information

manual.

Definitions of Safety Notices

danger

notice indicates the presence of a hazard that has the potential of causing

death or serious personal injury.

Danger

notices appear on the following pages:

2-1, 4-1, 5-3, 5-10, 5-18

caution

notice indicates the presence of a hazard that has the potential of causing

moderate or minor personal injury.

Caution

notices appear on the following pages:

2-1, 2-4, 2-25, 2-30, 2-33, 2-34, 3-3, 4-1, 4-2, 4-4, 4-8, 4-11, 4-17, 4-22, 4-25, 5-3,

5-6, 5-10, 5-18

attention

notice indicates an action that could cause damage to a program,

device, system, or data.

Safety Notice for Installing or Servicing

For safety checks when installing or servicing an Model S00 rack, refer to Chapter 2,

System Installation, and Chapter 4, Removal and Replacement.

Note: Before connecting or removing any cables to or from the system, be sure to

follow the steps in the system installation procedures specified in the

installation and service guide for your system or device.

Safety Notices ix

x7014 Model S00 Rack Installation and Service Guide

Andere IBM Server Handbücher

IBM

IBM eserver pSeries 690 Bedienungsanleitung

IBM

IBM Flex System x240 Compute Node Bedienungsanleitung

IBM

IBM System x3650 M4 Type 7915 Bedienungsanleitung

IBM

IBM BladeCenter HS22 Type 7870 Bedienungsanleitung

IBM

IBM BladeCenter PS703 Installationsanleitung

IBM

IBM i Series Bedienungsanleitung

IBM

IBM Power 720 Express 8202-E4B Bedienungsanleitung

IBM

IBM 8840 - eServer xSeries 346 Bedienungsanleitung

IBM

IBM Netfinity 4500R Bedienungsanleitung

IBM

IBM Netfinity 7600 Produktinformationsblatt

IBM

IBM Power System 8335-GTW Bedienungsanleitung

IBM

IBM System x3250 M5 Bedienungsanleitung

IBM

IBM BladeCenter JS20 Betriebsanleitung

IBM

IBM Carrier Grade X3650 T Bedienungsanleitung

IBM

IBM S822LC Bedienungsanleitung

IBM

IBM eServer xSeries 226Type 8648 Bedienungsanleitung

IBM

IBM BladeCenter HX5 Bedienungsanleitung

IBM

IBM System x3650 Type 7979 Bedienungsanleitung

IBM

IBM Flex System x440 Compute Node Montage- und Wartungsanleitung

IBM

IBM Power System 5148-22L Bedienungsanleitung

IBM

IBM System x3500 M2 Type 7839 Bedienungsanleitung

IBM

IBM BladeCenter HS22V Handbuch

IBM

IBM 8668 - Eserver xSeries 232 Betriebsanleitung

IBM

IBM eServer xSeries 455 Type 8855 Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung