ICP DAS USA M-7069D Bedienungsanleitung

M-7069D 4-ch Form A Relay and 4-ch Form C Relay DAQ Module- QuickStart (Mar/2018)

ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717

M-7069D

4-channel Form A Relay Output and 4-

channel Form C Relay Output Data

Acquisition Module

Quick Start Guide

Product Website:

https://www.icpdas-usa.com/m_7069D.html

http://www.icpdas-usa.com/dcon_utility_pro.html

1. Introduction

The M-7069D provides 4 Form A signal relay output channels and 4 Form

C signal relay output channels, while the M-7069D provides 4 Form A

power relay output channels and 4 Form C power relay output channels. 4

kV ESD, 4 kV EFT and 3 kV surge protection are also provided to enhance

noise protection capabilities in industrial environments. The M-7068 is the

ideal solution for small signal switching, while the M-7069D is the ideal

solution for high power applications.

2. Terminal Assignment

M-7069D 4-ch Form A Relay and 4-ch Form C Relay DAQ Module- QuickStart (Mar/2018)

ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717

3. Block/ Wiring Diagram

4. Default Settings

。Protocol: Modbus RTU

。Module Address: 01

。DIO Type: Type 40

。Baud Rate: 9600 bps

M-7069D 4-ch Form A Relay and 4-ch Form C Relay DAQ Module- QuickStart (Mar/2018)

ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717

5. Configuration

To install the module, follow the steps below:

1. Connect the digital input and output.

2. Connect the module to the RS-485 network using the DATA+ and DATA- terminals. If

the host is only equipped with an RS-232 interface, then an RS-232 to RS-485

converter will be required.

3. Connect the module to the power supply using the +Vs and GND terminals. Note that

the voltage supplied should be in the range of +10 to +30V DC.

4. Open DCON utility pro

click on COM port(first icon).

It can select multi-options such as Baud Rate, Protocol, Checksum, and Format

to search module. The default settings for the module can be found in Section 3.

Click OK after selecting the COM port setting.

M-7069D 4-ch Form A Relay and 4-ch Form C Relay DAQ Module- QuickStart (Mar/2018)

ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717

5. DCON utility pro will search for the selected COM port according the setting

previously set. DCON Utility Pro supports DCON and Modbus protocol for all ICPDAS

and the others modules.

M-7069D 4-ch Form A Relay and 4-ch Form C Relay DAQ Module- QuickStart (Mar/2018)

ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717

6. Configuration I/O module setting on PC

7. For I-7000 modules, DCON utility pro terminal can send command to the module.

See user manual Sections 2 for details command.

Configure the module: sending the %AANNTTCCFF command. See user manual

Section 2 for details.

Read data from the input channels: send either the #AA or #AAN command to the

module.

M-7069D 4-ch Form A Relay and 4-ch Form C Relay DAQ Module- QuickStart (Mar/2018)

ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717

8. If user doesn’t know command, user can select Address and ID, it will show some

refer commands as below. User can select necessary command to test or debug

modules.

Inhaltsverzeichnis

Andere ICP DAS USA Steuereinheit Handbücher

ICP DAS USA

ICP DAS USA ET-2260 Bedienungsanleitung

ICP DAS USA

ICP DAS USA tM-P3R3 Bedienungsanleitung

ICP DAS USA

ICP DAS USA M-7088 Bedienungsanleitung

ICP DAS USA

ICP DAS USA GPS-721-MRTU Bedienungsanleitung

ICP DAS USA

ICP DAS USA HRT-370 Bedienungsanleitung

ICP DAS USA

ICP DAS USA WF-2026 Bedienungsanleitung

ICP DAS USA

ICP DAS USA ISN-101 Bedienungsanleitung

ICP DAS USA

ICP DAS USA SG-3071 Bedienungsanleitung

ICP DAS USA

ICP DAS USA ET-2200 Series Bedienungsanleitung

ICP DAS USA

ICP DAS USA PETL-7060 Bedienungsanleitung

ICP DAS USA

ICP DAS USA PM-4324 Series Bedienungsanleitung

ICP DAS USA

ICP DAS USA M-7019Z Bedienungsanleitung

ICP DAS USA

ICP DAS USA M-7067D Bedienungsanleitung

ICP DAS USA

ICP DAS USA MDC-700 Series Bedienungsanleitung

ICP DAS USA

ICP DAS USA ET-7000 series Bedienungsanleitung

ICP DAS USA

ICP DAS USA I-8092F Stücklistenhandbuch

ICP DAS USA

ICP DAS USA M-7060 Bedienungsanleitung

ICP DAS USA

ICP DAS USA tM-TH8 Bedienungsanleitung

ICP DAS USA

ICP DAS USA ET-7065 Bedienungsanleitung

ICP DAS USA

ICP DAS USA PDS-5000 Series Bedienungsanleitung

ICP DAS USA

ICP DAS USA WISE-5801-MTCP Bedienungsanleitung

ICP DAS USA

ICP DAS USA GT-540P-3GWA-OEM1 Bedienungsanleitung

ICP DAS USA

ICP DAS USA SG-3227 Bedienungsanleitung

ICP DAS USA

ICP DAS USA HRT-711 Bedienungsanleitung

Beliebte Steuereinheit Handbücher anderer Marken

Festo

Festo Compact Performance CP-FB6-E Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

Eaton

Eaton Powerware Series Bedienungsanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung