IFM Electronic Efector 250 O2D22x Bedienungsanleitung

Operating instructions

Object recognition sensor

O2D22x

80232357 / 00 10 / 2015

Object recognition sensor O2D22x

Contents

1 Preliminary note ................................................. 4

1.1 Symbols used............................................... 4

2 Safety instructions ............................................... 4

3 Items supplied................................................... 4

3.1 Accessories ................................................ 4

4 Functions and features ............................................ 4

5 Installation...................................................... 5

5.1 Mounting accessory .......................................... 5

5.2 Mounting dimensions ......................................... 6

5.3 Installation location........................................... 6

6 Electrical connection.............................................. 7

6.1 Wiring ..................................................... 8

6.2 Wiring diagram .............................................. 8

6.3 External illumination .......................................... 9

6.4 External trigger source ........................................ 9

6.5 Timing diagrams ............................................ 10

6.5.1 Inputs/outputs ............................................ 10

6.5.2 Static selection of the application ............................. 12

6.5.3 Pulse-controlled selection of the application ..................... 13

7 Operating and display elements .................................... 14

7.1 LED display ............................................... 14

7.2 Display ................................................... 15

7.2.1 Operating indicators ....................................... 15

7.2.2 Connection via the operating program ......................... 16

7.2.3 Error messages ........................................... 16

7.3 Pushbuttons ............................................... 16

8 Set-up ........................................................ 17

8.1 Parameter setting on the unit .................................. 17

8.2 Verify and set the IP address on the unit ......................... 17

8.3 Adjustable parameters ....................................... 18

8.3.1 Parameter structure........................................ 19

8.4 Lock / unlock sensor......................................... 20

8.4.1 Reset device to factory settings .............................. 20

8.5 Parameter setting via PC operating program ...................... 20

9 Operation ..................................................... 21

9.1 Evaluation mode (normal operating mode) ....................... 21

10 Scale drawing ................................................. 21

11 Technical data ................................................. 22

11.1 Operating distance L........................................ 22

11.2 Factory settings ........................................... 22

Object recognition sensor O2D22x

12 Process data protocol........................................... 24

12.1 Configuring the process interface.............................. 24

12.2 Communication basics ...................................... 24

12.2.1 Abbreviations and terms ................................... 24

12.2.2 Commands for the device .................................. 24

12.2.3 Replies from the device.................................... 24

12.3 Protocol versions .......................................... 25

12.4 Command types ........................................... 25

12.5 Release trigger ............................................ 26

12.6 Select protocol version ...................................... 26

12.7 Select the application ....................................... 26

12.8 Activate/deactivate result output............................... 27

12.9 Transmit the image to the device for evaluation................... 27

12.10 Transmit the application data set to the device .................. 28

12.11 Request the assignment of the application data from the device ..... 28

12.12 Request the statistics from the device ......................... 29

12.13 Request the error code from the device ........................ 29

12.14 Request the last image from the device ........................ 29

12.15 Request the last result from the device ........................ 30

12.16 Release trigger, evaluate captured image and result output via process

interface ..................................................... 30

12.17 Request the protocol version ................................ 30

12.18 Request the device information .............................. 31

12.19 Request the last "bad" image from the device ................... 31

12.20 Result message .......................................... 32

12.21 Error codes from the device ................................. 35

13 Maintenance, repair and disposal.................................. 37

14 Approvals/standards ............................................ 37

15 Note on the software............................................ 37

Object recognition sensor O2D22x

1 Preliminary note

1.1 Symbols used

►Instruction

> Reaction, result

[…] Designation of pushbuttons, buttons or indications

→Cross-reference

Important note

Non-compliance can result in malfunction or interference

Information

Supplementary note

2 Safety instructions

These instructions are part of the device. They contain information and illustrations

about the correct handling of the device and must be read before installation or

use.

Observe the operating instructions.

Non-observance of the instructions, operation which is not in accordance with use

as prescribed below, wrong installation or incorrect handling can affect the safety

of operators and machinery.

The installation and connection must comply with the applicable national and inter-

national standards. Responsibility lies with the person installing the unit.

Only the signals indicated in the technical data or on the device label may be sup-

plied to the connections or wires.

3 Items supplied

1 Object recognition sensor O2D22x

1 Operating instructions "Object recognition sensor O2D22x”, Ident no.: 706225

The device is supplied without installation/connection accessories and software.

3.1 Accessories

www.ifm.com

→ Data sheet search → e.g. O2D220 → Accessories

4 Functions and features

The sensor uses incident light or backlight to detect the contours of an object and

compares them with the contours of one or several models in a reference image.

Depending on the degree of conformity the output can indicate if a model was

found or which one was found.

Object recognition sensor O2D22x

5 Installation

5.1 Mounting accessory

The device is compatible with the mounting accessories of ifm's photoelectric sen-

sors for the O2Ixxx (multicode reader), O2Mxxx (EthernetCamera) series etc.

Example mounting with clamp and bracket

►Use the mounting accessory E2D101.

1. Focal setter

2. Mounting accessory

3. Object to be recognised

4. Field of view size W X H

5. Operating distance L

Depending on the intended location and type of mounting the following mounting

accessories are available:

Description Art. no.

Mounting set for shaft Ø 12 mm

(clamp and bracket for types O2Dxxx, O2Mxxx, O2Ixxx)

E2D110

Shaft, straight Ø 12 mm, length 130 mm, M10 E20938

Shaft, angled Ø 12 mm, length 200 mm, M10 E20940

Mounting set for shaft Ø 14 mm

(clamp and bracket for types O2Dxxx, O2Mxxx, O2Ixxx)

E2D112

Object recognition sensor O2D22x

Description Art. no.

Shaft, straight Ø 14 mm, length 130 mm, M12 E20939

Shaft, angled Ø 14 mm, length 200 mm, M12 E20941

You can find more information about the available accessories at:

www.ifm.com

→ Data sheet search → e.g. O2D220 → Accessories

or directly

www.ifm.com

→ Data sheet search → e.g. E2D110

5.2 Mounting dimensions

The device is mounted using the mounting accessories or 2 M4 screws and nuts.

Hole dimensions → Chapter 10 Scale drawing.

5.3 Installation location

►Mount the sensor in front of or above the area to be monitored.The detectable

field of view size depends on the operating distance → Chapter 11 Technical

Data.

►Back light or scattered light situations and continuously changing light condi-

tions are to be avoided.

►Do not position room lights directly facing the camera lens.

►Position the optional external illumination (e.g. O2D909) opposite the camera

lens.

►To avoid adverse effects on the image detection, avoid installation in heavily

polluting areas of the machine.

►The connected cables must be provided with a strain relief.

Object recognition sensor O2D22x

6 Electrical connection

NOTE

The unit must be connected by a qualified electrician.

►Disconnect power before connecting the unit.

NOTE

The voltage on pins 2, 4, 5, 6, 7 and 8 must not exceed the supply voltage on

pin 1 (U+).

►Use the same power supply and protective equipment for

●the device (e.g. O2Dxxx),

●the signal generator at the inputs (e.g. trigger switch, plc),

●the signal pick-up at the outputs (e.g. plc).

As an alternative, a diode at the switching outputs can prevent feedback

(see fig. below).

O O

1 unit

2 switching output

3 diode

4 plc

5 common load

Object recognition sensor O2D22x

6.1 Wiring



Process interface (1)

M12 plug, A-coded, 8 poles (view on the unit)











1 U+

2 Trigger input

3 0V

4 Switching output / trigger output

5 Switching output (ready)

6 Switching output (OUT)

7 Switching output / input 1

8 Switching output / input 2

Parameter/process interface (2)

M12 socket, D-coded, 4 poles (view on the unit)









1 Ethernet TD +

2 Ethernet RD +

3 Ethernet TD -

4 Ethernet RD -

S Shield

6.2 Wiring diagram















 





  





  

Process interface

Controller e.g. PLC

External trigger

External illumination

(optional)

Pin Use (factory setting)

Output signal "READY" provides the status of the sensor:

"1" after the evaluation has been carried out. "0" as long as the evaluation is being carried out, a

different application is being selected or in case of an internal error (trigger signals are ignored).

Output signal "OUT" provides the result of the evaluation:

"0" no matching model "1" matching model

Object recognition sensor O2D22x

►For PNP units (e.g. O2D220) use trigger sensors, illumination units and control-

lers with PNP inputs and outputs.

►For NPN units (e.g. O2D227) use trigger sensors, illumination units and con-

trollers with NPN inputs and outputs.

6.3 External illumination

►Connect external illumination to the trigger output of the device.

Example Art. no.

Illumination unit, transmitter red light 630 nm O2D909

For information about the a.-m. example see:

www.ifm.com

→ Data sheet search → O2D909

6.4 External trigger source

►Connect an external trigger source (e.g. a diffuse reflection sensor) to the trig-

ger input of the device.

If you use an external trigger source (e.g. a diffuse reflection sensor),

connect the trigger signal to the trigger input of the sensor. If you use

external illumination, it must be controlled via the trigger output of the

sensor.Depending on the device setting, one of four configuration files

saved in the sensor can be selected via two switching inputs. Information

about the test result is provided via switching outputs.

Object recognition sensor O2D22x

6.5 Timing diagrams

6.5.1 Inputs/outputs

4.1

4.2

Example: Triggering positive edge

1: Trigger input Trigger signal

0: no action

1: triggering on positive edge

2: READY output Ready signal

0: unit busy, OUT output not valid

1: unit ready for trigger signal, OUT output valid

3: OUT output,

static

Object evaluation

0: object evaluation not successful

1: object evaluation successful

Example 1 (dashed line):

last object OK, OUT = 1

next object faulty, OUT 1 → 0

next object OK, OUT 0 → 1

Example 2 (solid line):last object faulty,

OUT = 0

next object OK, OUT 0 → 1

next object OK, OUT 1

4 OUT output,

pulsed

Object evaluation

0: object evaluation not successful or timeout of pulse length

1: object evaluation successful

Example 4.1:

both objects OK, OUT = 1

after expiration of tB, OUT = 0

Example 4.2:

first object OK, OUT = 1

after expiration of tB, OUT = 0

second object faulty, OUT = 0

Inhaltsverzeichnis

Andere IFM Electronic Zubehör Handbücher

IFM Electronic

IFM Electronic PN50 Series Bedienungsanleitung

IFM Electronic

IFM Electronic efector300 SI1004 Bedienungsanleitung

IFM Electronic

IFM Electronic Efector 200 OGT1 Series Bedienungsanleitung

IFM Electronic

IFM Electronic efector300 SBU3 Bedienungsanleitung

IFM Electronic

IFM Electronic efector 160 Bedienungsanleitung

IFM Electronic

IFM Electronic efector 300 SU9001 Bedienungsanleitung

IFM Electronic

IFM Electronic LR7300 Bedienungsanleitung

IFM Electronic

IFM Electronic GM701S Bedienungsanleitung

IFM Electronic

IFM Electronic VNB001 Bedienungsanleitung

IFM Electronic

IFM Electronic efector 300 SM6004 Bedienungsanleitung

IFM Electronic

IFM Electronic efector100 GG507S Bedienungsanleitung

IFM Electronic

IFM Electronic efector 250 O2D2 Series Betriebsanleitung

IFM Electronic

IFM Electronic Efector 300 SA1000 Bedienungsanleitung

IFM Electronic

IFM Electronic Efectorsod PE70 Series Bedienungsanleitung

IFM Electronic

IFM Electronic Efector 410 JN2100 Anwendungshandbuch

IFM Electronic

IFM Electronic TUV NORD Efector 110 GM701S Bedienungsanleitung

IFM Electronic

IFM Electronic Efector 410 JN2100 Anwendungshandbuch

IFM Electronic

IFM Electronic TS502A Bedienungsanleitung

IFM Electronic

IFM Electronic efector 200 OJ51 Series Bedienungsanleitung

IFM Electronic

IFM Electronic efector 300 SU7200 Bedienungsanleitung

IFM Electronic

IFM Electronic O5H Bedienungsanleitung

IFM Electronic

IFM Electronic Efector 200 O6T3 Series Bedienungsanleitung

IFM Electronic

IFM Electronic SB 4 Series Bedienungsanleitung

IFM Electronic

IFM Electronic Efector 100 GM505S Bedienungsanleitung

Beliebte Zubehör Handbücher anderer Marken

Hillco

Hillco 2810 Bedienungsanleitung

Siemens

Siemens QSA2700D Bedienerhandbuch

Contours

Contours ZY024 Bedienungsanleitung

Saivod

Saivod VS621 Bedienungsanleitung

Virtuox

Virtuox VirtuCLEAN 2.0 Bedienungsanleitung

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Bedienungsanleitung

Z-Wave

Z-Wave HSD-200Z Bedienungsanleitung

turck

turck FMX-IM-2UPLI63FX Bedienungsanleitung

Decagon Devices

Decagon Devices 10HS Bedienungsanleitung

UPPAbaby

UPPAbaby Cup Holder Bedienungsanleitung

Elko

Elko SmartSensor Leakage Wireless Bedienungsanleitung

Grizzly

Grizzly H8371 Bedienungsanleitung

Panasonic

Panasonic HG-T Series Bedienungsanleitung

DigiDesign

DigiDesign 888/24 I/O Bedienungsanleitung

PROZIS

PROZIS QUAY Bedienungsanleitung

patagonia

patagonia PSI Vest Bedienungsanleitung

SFC Energy

SFC Energy EFOY GO! Bedienungsanleitung

Axminster

Axminster Tooling Stylus Tip Ballpoint Pen Kit Bedienungsanleitung

IFM Electronic efector 250 O2D22x Bedienungsanleitung

Beliebte Zubehör Handbücher anderer Marken