IFM Electronic Efector230 Bedienungsanleitung

Operating instructions

Ultrasonic diffuse reflective sensors

UGB

UGC

80237715 / 00 04 / 2016

1 Preliminary note

1.1 Symbols used

►Instructions

> Reaction, result

→Cross-reference

Important note

Non-compliance may result in malfunction or interference.

Information Supplementary note.

2 Safety instructions

• Installation, electrical connection, set-up, operation and maintenance of the unit

must be carried out by qualified personnel authorised by the machine operator.

3 Functions and features

Ultrasonic sensors detect objects of various materials without any contact.

Depending on the selected sensor, detected objects are signalled via switching

output or their distance is indicated by means of a proportional analogue signal.

4 Installation

UGBxxx / UGCxxx

1: Status LED (yellow) 2: Echo LED (green)

►Position object.

►Align the ultrasonic sensor so that it directly faces the object or the background

and secure it to a bracket.

> Object / background is detected when the echo LED (green) lights.

Sound-absorbing surfaces have a negative effect on a reliable function.

During installation of the device, consider the blind zone.

5 Electrical connection

►Disconnect power.

►Connect device (depending on the type selected)

Core colours

2 1

L+

OUT

2WH

Teach

L+

OUT

2WH

Teach

Units with binary output

BK Black OUT: Switching output

BN Brown Teach: Programming wire

BU Blue Units with analogue output

OUT: Analogue output

WH White Teach: Programming wire

Colours to DIN EN 60947-5-2

Technical data and further information at → www.ifm.com

6 Set-up

Note the LED behaviour for the set-up:

Echo LED green

On Echo is received.

Off No echo (object / background not detected).

Off For the time of resetting to factory setting.

Status LED yellow

LED Function acknowledgement

Flashes 1 Hz x Programming mode active.

Flashes 2.5 Hz x Setting distance P1 completed.

Flashes 4 Hz x Setting distance P2 completed or

assignment acknowledgement of the setting.

Flashes 10 Hz x Inverting the switching characteristics.

7 Wire programming

Unit with switching output: Teach with L+. Unit with analogue output: Teach with L-.

L+

OUT

2WH

L+

OUT

2WH

8 Settings

►Start programming mode of the device.

►Connect teach input, 2 s...6 s → 7 Wire programming.

> LED flashes (1 Hz).

If programming has not been completed successfully, the device returns to

the previous setting.

8.1

Window function, distance P1 > P2

►Object in position P1.

►Connect teach input approx. 1 s.

> LED flashes (2.5 Hz).

►Object in position P2.

►Connect teach input approx. 1 s.

> LED flashes (4 Hz).

B P2 P1

Output response:

Units with switching outputs.

Output response:

Units with analogue output.

B P2 P1

X: Distance B: Blind zone

Y: Output response P1: Setting point 1 (OUTx)

①: OUT1 (switching output) P2: Setting point 2 (OUTx)

②: OUT2 (analogue output)

8.2 Hysteresis function, distance P1 = P2

►Object in position P1.

►Connect teach input approx. 1 s.

> LED flashes (2.5 Hz).

►Object in position P2.

►Connect teach input approx. 1 s.

> LED flashes (4 Hz).

B P1/P2

Output response:

Units with switching outputs.

Output response:

Units with analogue output

B P1/P2

8.3 Inverting the output response

►Connect teach input > 6 s → 7 Wire programming.

> LED flashes (> 10 Hz).

Inverted output function (switching output: NO changes to NC or vice versa /

Analouge output: low...high signal changes to wird high... low signal or vice versa

8.4 Restore factory setting

►Align the device so that no echo is received.

►Go into the programming mode of the unit.

►Connect teach input 1 s → 7 Wire programming.

> LED flashes shortly with 4 Hz.

9 Operation

►Check whether the unit operates correctly.

> Display by LEDs:

Green LED is lit. Echo is received.

Yellow LED is lit Output is switched / object is into the teached operating range .

Green LED flashes Short circuit at the output.

The minimum distance between the “Proximity Switch Metal Enclosure“ and

any “External uninsulated live part“ shall be at least 12.7 mm.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere IFM Electronic Zubehör Handbücher

IFM Electronic

IFM Electronic Efector 200 Bedienungsanleitung

IFM Electronic

IFM Electronic Efector 200 Installationsanleitung

IFM Electronic

IFM Electronic Efectorsod PM2053 Bedienungsanleitung

IFM Electronic

IFM Electronic Efector 200 Bedienungsanleitung

IFM Electronic

IFM Electronic efector 200 OJ50 Series Bedienungsanleitung

IFM Electronic

IFM Electronic Efector500 PF2058 Bedienungsanleitung

IFM Electronic

IFM Electronic efector 250 O2D2 Series Betriebsanleitung

IFM Electronic

IFM Electronic ecomat100 CR2101 Anwendungshandbuch

IFM Electronic

IFM Electronic efector 600 OWF Bedienungsanleitung

IFM Electronic

IFM Electronic O1D155 Bedienungsanleitung

IFM Electronic

IFM Electronic PB7 Bedienungsanleitung

IFM Electronic

IFM Electronic efector200 OG Series Bedienungsanleitung

IFM Electronic

IFM Electronic LK7 Bedienungsanleitung

IFM Electronic

IFM Electronic efector 200 OG laser Bedienungsanleitung

IFM Electronic

IFM Electronic SA 00 Series Bedienungsanleitung

IFM Electronic

IFM Electronic efector200 OL Bedienungsanleitung

IFM Electronic

IFM Electronic efector100 GG507S Bedienungsanleitung

IFM Electronic

IFM Electronic efector 300 SU7200 Bedienungsanleitung

IFM Electronic

IFM Electronic Efector 200 OL Series Bedienungsanleitung

IFM Electronic

IFM Electronic efector 200 OGT Series Bedienungsanleitung

IFM Electronic

IFM Electronic KQ5 Series Bedienungsanleitung

IFM Electronic

IFM Electronic efector500 PC3 Series Bedienungsanleitung

IFM Electronic

IFM Electronic OGP Bedienungsanleitung

IFM Electronic

IFM Electronic Efector 500 PL2058 Bedienungsanleitung

Beliebte Zubehör Handbücher anderer Marken

Hillco

Hillco 2810 Bedienungsanleitung

Siemens

Siemens QSA2700D Bedienerhandbuch

Contours

Contours ZY024 Bedienungsanleitung

Saivod

Saivod VS621 Bedienungsanleitung

Virtuox

Virtuox VirtuCLEAN 2.0 Bedienungsanleitung

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Bedienungsanleitung

Z-Wave

Z-Wave HSD-200Z Bedienungsanleitung

turck

turck FMX-IM-2UPLI63FX Bedienungsanleitung

Decagon Devices

Decagon Devices 10HS Bedienungsanleitung

UPPAbaby

UPPAbaby Cup Holder Bedienungsanleitung

Elko

Elko SmartSensor Leakage Wireless Bedienungsanleitung

Grizzly

Grizzly H8371 Bedienungsanleitung

Panasonic

Panasonic HG-T Series Bedienungsanleitung

DigiDesign

DigiDesign 888/24 I/O Bedienungsanleitung

PROZIS

PROZIS QUAY Bedienungsanleitung

patagonia

patagonia PSI Vest Bedienungsanleitung

SFC Energy

SFC Energy EFOY GO! Bedienungsanleitung

Axminster

Axminster Tooling Stylus Tip Ballpoint Pen Kit Bedienungsanleitung

IFM Electronic efector230 Bedienungsanleitung

Beliebte Zubehör Handbücher anderer Marken