IFM Electronic Efector 200 Bedienungsanleitung

Operating instructions

Diffuse reflection sensor with

background suppression

O6H2

O6H200 / 01 01 / 2015

1 Preliminary note

1.1 Symbols used

►Instruction

> Reaction, result

[…] Designation of pushbuttons, buttons or indications

→Cross-reference

Important note

Non-compliance can result in malfunctions or interference.

2 Functions and features

The diffuse reflection sensor detects objects and materials without contact and

indicates their presence by a switching signal.

3 Installation

►Align the diffuse reflection sensor to the object to be detected.

►Secure it to a bracket.

Note:

The objects to be detected are to move transversely to the

lens of the sensor.

►In case of other directions of movement it should be

tested before whether safe switching is guaranteed.

4 Operating and display elements

1: LED yellow - switching output active

2: Setting potentiometer „range“

3: LED green - operation, stability indication

4: Selector „output function“

4.1 Stability indication

The green LED is lit when the supply voltage is applied and the sensor signal is

stable.

stable signal switch point stable signal

Light-on mode

LED green on off off on

LED yellow on on off off

Dark-on mode

LED green on off off on

LED yellow off off on on

5 Electrical connection

The unit must be connected by a qualified electrician.

►The national and international regulations for the installation of electri-

cal equipment must be adhered to.

►Ensure voltage supply to EN 50178.

►Disconnect power.

►Connect the unit as follows:

5.1 PNP

Connector M12 pigtail Cable *





















Connector M8 3-pin Connector M8 4-pin





















* Core colours: BN = brown, BU = blue, BK = black

5.2 NPN

Connector M12 pigtail Cable *

L+

Connector M8 3-pin Connector M8 4-pin

L+

* Core colours: BN = brown, BU = blue, BK = black

6 Settings

6.1 Set the output function

►Setting D: dark-on mode

►Setting L: light-on mode

6.2 Set the range

►Increase range: turn the setting screw

of the potentiometer clockwise.

►Decrease range: turn the setting screw

of the potentiometer anti-clockwise.

Objects that are beyond the set switch point are suppressed.

7 Operation

►Check whether the unit operates correctly.

> The green LED is lit when the supply voltage is applied and the sensor signal

is stable.

> Dark-on mode: the output is switched / the yellow LED is lit when no object is

detected.

> Light-on mode: the output is switched / the yellow LED is lit when an object is

detected.

8 Maintenance, repair, disposal

►Keep the lens of the sensor free from soiling.

►For cleaning do not use any solvents or cleaning agents which could damage

the plastic parts.

►After use dispose of the unit in an environmentally friendly way in accordance

with the applicable national regulations.

Faulty sensors must only be repaired by the manufacturer.

Technical data and further information at unter www.ifm.com

Andere Handbücher für Efector 200

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere IFM Electronic Zubehör Handbücher

IFM Electronic

IFM Electronic efector 200 OJ50 Series Bedienungsanleitung

IFM Electronic

IFM Electronic SM6000 Bedienungsanleitung

IFM Electronic

IFM Electronic efector 250 Bedienungsanleitung

IFM Electronic

IFM Electronic efector150 Bedienungsanleitung

IFM Electronic

IFM Electronic Efector 200 OL Series Bedienungsanleitung

IFM Electronic

IFM Electronic efector 500 PI00 A Series Bedienungsanleitung

IFM Electronic

IFM Electronic Efector 100 series Bedienungsanleitung

IFM Electronic

IFM Electronic GM701S Bedienungsanleitung

IFM Electronic

IFM Electronic EFECTOR 500 PI26 Bedienungsanleitung

IFM Electronic

IFM Electronic efector200 OC Bedienungsanleitung

IFM Electronic

IFM Electronic PB7 Bedienungsanleitung

IFM Electronic

IFM Electronic PY995 Series Bedienungsanleitung

IFM Electronic

IFM Electronic efector230 UGA Bedienungsanleitung

IFM Electronic

IFM Electronic efector160 LI214 Series Bedienungsanleitung

IFM Electronic

IFM Electronic efector 300 SU8200 Bedienungsanleitung

IFM Electronic

IFM Electronic LK8122 Bedienungsanleitung

IFM Electronic

IFM Electronic ecomat100 CR2101 Anwendungshandbuch

IFM Electronic

IFM Electronic efector160 LR7000 Bedienungsanleitung

IFM Electronic

IFM Electronic efector160 LI51 Bedienungsanleitung

IFM Electronic

IFM Electronic Efector 500 PL2058 Bedienungsanleitung

IFM Electronic

IFM Electronic efector500 PI20 Bedienungsanleitung

IFM Electronic

IFM Electronic PI209 Series Bedienungsanleitung

IFM Electronic

IFM Electronic SU7000 Bedienungsanleitung

IFM Electronic

IFM Electronic efector200 OW Series Bedienungsanleitung

Beliebte Zubehör Handbücher anderer Marken

Hillco

Hillco 2810 Bedienungsanleitung

Siemens

Siemens QSA2700D Bedienerhandbuch

Contours

Contours ZY024 Bedienungsanleitung

Saivod

Saivod VS621 Bedienungsanleitung

Virtuox

Virtuox VirtuCLEAN 2.0 Bedienungsanleitung

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Bedienungsanleitung

Z-Wave

Z-Wave HSD-200Z Bedienungsanleitung

turck

turck FMX-IM-2UPLI63FX Bedienungsanleitung

Decagon Devices

Decagon Devices 10HS Bedienungsanleitung

UPPAbaby

UPPAbaby Cup Holder Bedienungsanleitung

Elko

Elko SmartSensor Leakage Wireless Bedienungsanleitung

Grizzly

Grizzly H8371 Bedienungsanleitung

Panasonic

Panasonic HG-T Series Bedienungsanleitung

DigiDesign

DigiDesign 888/24 I/O Bedienungsanleitung

PROZIS

PROZIS QUAY Bedienungsanleitung

patagonia

patagonia PSI Vest Bedienungsanleitung

SFC Energy

SFC Energy EFOY GO! Bedienungsanleitung

Axminster

Axminster Tooling Stylus Tip Ballpoint Pen Kit Bedienungsanleitung