IFM Efector 200 O6E4 Bedienungsanleitung

Operating instructions

Through-beam sensor

O6E4 / O6S4

O6E400 / 00 10 / 2015

1 Preliminary note

1.1 Symbols used

►Instruction

> Reaction, result

[…] Designation of pushbuttons, buttons or indications

→Cross-reference

Important note

Non-compliance can result in malfunctions or interference.

2 Functions and features

The through-beam sensor detects objects and materials without contact and

indicates their presence by a switching signal.

3 Installation

Transmitter Receiver

►Install the receiver (O6E...) and secure it to a bracket.

►Align the transmitter (O6S...) to the receiver and fix it.

Maximum range only with accurate alignment.

4 Operating and display elements

1: LED green - operation

Transmitter

1: LED yellow - switching output active

2: Setting potentiometer „sensitivity“

3: LED green - operation

4: Selector „output function“

Receiver

4.1 Stability indication

The green LED is lit when the supply voltage is applied and the sensor signal is

stable.

stable signal switch point stable signal

Light-on mode

LED green on off off on

LED yellow on on off off

Dark-on mode

LED green on off off on

LED yellow off off on on

5 Electrical connection

The unit must be connected by a qualified electrician.

►The national and international regulations for the installation of electri-

cal equipment must be adhered to.

►Ensure voltage supply to EN 50178.

►Disconnect power.

►Connect the unit as follows:

5.1 Transmitter

Connector M12 pigtail Cable *

L+









Connector M8 3-pin Connector M8 4-pin

L+

* Core colours: BN = brown, BU = blue, BK = black

5.2 Receiver

5.2.1 PNP

Connector M12 pigtail Cable *





















Connector M8 3-pin Connector M8 4-pin





















* Core colours: BN = brown, BU = blue, BK = black

5.2.2 NPN

Connector M12 pigtail Cable *

L+

Connector M8 3-pin Connector M8 4-pin

L+

* Core colours: BN = brown, BU = blue, BK = black

6 Settings

6.1 Set the output function

►Setting D: dark-on mode

►Setting L: light-on mode

Receiver

6.2 Set the sensitivity

►Increase sensitivity:

turn the setting screw of the potenti-

ometer clockwise.

►Decrease sensitivity:

turn the setting screw of the potenti-

ometer anti-clockwise.

Receiver

7 Operation

►Check whether the unit operates correctly.

> The green LED is lit when the sensor is ready for operation.

> Dark-on mode: the output is switched / the yellow LED is lit when an object is

detected.

> Light-on mode: the output is switched / the yellow LED is lit when no object is

detected.

8 Maintenance, repair, disposal

►Keep the lens of the sensor free from soiling.

►For cleaning do not use any solvents or cleaning agents which could damage

the plastic parts.

►After use dispose of the unit in an environmentally friendly way in accordance

with the applicable national regulations.

Faulty sensors must only be repaired by the manufacturer.

Technical data and further information at unter www.ifm.com

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere IFM Zubehör Handbücher

IFM

IFM PC3 Series Bedienungsanleitung

IFM

IFM O5H5xA Series Bedienungsanleitung

IFM

IFM efector 200 OGH Bedienungsanleitung

IFM

IFM PQ3 Series Bedienungsanleitung

IFM

IFM UGR500 Bedienungsanleitung

IFM

IFM EIO104 Bedienungsanleitung

IFM

IFM Efector 200 OJ Bedienungsanleitung

IFM

IFM GF854S Bedienungsanleitung

IFM

IFM MN7 S Series Bedienungsanleitung

IFM

IFM MK59 Series Bedienungsanleitung

IFM

IFM PN00 A Series Bedienungsanleitung

IFM

IFM LI513 Series Bedienungsanleitung

IFM

IFM PN72 Series Bedienungsanleitung

IFM

IFM Efector 160 LK8 Bedienungsanleitung

IFM

IFM Efector 500 PF2652 Bedienungsanleitung

IFM

IFM KI0063 Bedienungsanleitung

IFM

IFM PM16 Series Bedienungsanleitung

IFM

IFM Efector 500 PM2655 Bedienungsanleitung

IFM

IFM 402946 Bedienungsanleitung

IFM

IFM PI16 Series Bedienungsanleitung

IFM

IFM SI 5000 Bedienungsanleitung

IFM

IFM Efector500 PY7102 Bedienungsanleitung

IFM

IFM O2D50 Series Bedienungsanleitung

IFM

IFM Efector 200 O6E3 Bedienungsanleitung

Beliebte Zubehör Handbücher anderer Marken

Hillco

Hillco 2810 Bedienungsanleitung

Siemens

Siemens QSA2700D Bedienerhandbuch

Contours

Contours ZY024 Bedienungsanleitung

Saivod

Saivod VS621 Bedienungsanleitung

Virtuox

Virtuox VirtuCLEAN 2.0 Bedienungsanleitung

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Bedienungsanleitung

Z-Wave

Z-Wave HSD-200Z Bedienungsanleitung

turck

turck FMX-IM-2UPLI63FX Bedienungsanleitung

Decagon Devices

Decagon Devices 10HS Bedienungsanleitung

UPPAbaby

UPPAbaby Cup Holder Bedienungsanleitung

Elko

Elko SmartSensor Leakage Wireless Bedienungsanleitung

Grizzly

Grizzly H8371 Bedienungsanleitung

Panasonic

Panasonic HG-T Series Bedienungsanleitung

IFM Electronic

IFM Electronic Efector 250 Series Referenzhandbuch

DigiDesign

DigiDesign 888/24 I/O Bedienungsanleitung

PROZIS

PROZIS QUAY Bedienungsanleitung

patagonia

patagonia PSI Vest Bedienungsanleitung

SFC Energy

SFC Energy EFOY GO! Bedienungsanleitung