IFM VSP003 Bedienungsanleitung

Operating instructions

Acceleration sensor

VSP003

80268045/00 06/2017

1 Preliminary note

Technical data, approvals, accessories and further information at

www.ifm.com.

1.1 Symbols used

►Instructions

→Cross-reference

Important note

Non-compliance may result in malfunction or interference.

2 Safety instructions

• Read this document before setting up the product and keep it during the entire

service life.

• The product must be suitable for the corresponding applications and

environmental conditions without any restrictions.

• Only use the product for its intended purpose (→Functions and features).

• If the operating instructions or the technical data are not adhered to, personal

injury and/or damage to property may occur.

• The manufacturer assumes no liability or warranty for any consequences

caused by tampering with the product or incorrect use by the operator.

• Installation, electrical connection, set-up, operation and maintenance of the

product must be carried out by qualified personnel authorised by the machine

operator.

• Protect units and cables against damage.

3 Functions and features

The VSP003 acceleration sensor detects the vibration acceleration on non-rotating

components and is suitable for connection to the VSE evaluation unit.

4 Installation

►Mount only in a thick housing wall

(e.g. transport thread).

►Ensure that the signal direction is

correct.

►Ensure a safe vibration

transmission and allow no elastic

intermediate layers.

1: Tighten the sensor with a tightening torque of 8 Nm.

5 Electrical connection

The unit must be connected by a qualified electrician. The national and

international regulations for the installation of electrical equipment must be

adhered to.

M12

Pin 1: not connected

Pin 2: I

out

Pin 3: not connected

Pin 4: L-

5.1 Measuring range

Measuring range g ± 50

Measuring sensitivity mV/g 100 ± 5 %

Frequency range Hz 2...14000 ± 5 %

5.2 Use of a screened cable

►Use a screened cable to avoid conducted interference.

►Connect the screened cable to the DIN rail in the control cabinet.

►Maximum cable length 1000 m.

VSP VSE

1: screen

2: DIN rail

10.11: connection terminals sensor 1 to the VSE evaluation unit

►Take into account the operating instructions of the VSExxx evaluation unit for

acceleration sensors.

6 Maintenance, repair and disposal

The operation of the unit is maintenance-free. It is not possible to repair the unit.

After use dispose of the unit in an environmentally friendly way in accordance with

the applicable national regulations.

Inhaltsverzeichnis

Andere IFM Zubehör Handbücher

IFM

IFM Efector 410 Anwendungshandbuch

IFM

IFM KI0063 Bedienungsanleitung

IFM

IFM DTI424 Bedienungsanleitung

IFM

IFM efector 150 KF Bedienungsanleitung

IFM

IFM Efector 500 PI2652 Bedienungsanleitung

IFM

IFM TK61 Series Bedienungsanleitung

IFM

IFM Efector 500 PY2068 Bedienungsanleitung

IFM

IFM OGD25 Series Bedienungsanleitung

IFM

IFM GF854S Bedienungsanleitung

IFM

IFM OID20 Series Bedienungsanleitung

IFM

IFM Efector 200 OJ Bedienungsanleitung

IFM

IFM PN422 Series Bedienungsanleitung

IFM

IFM Efector 500 PNI02X Bedienungsanleitung

IFM

IFM O5P7 Series Bedienungsanleitung

IFM

IFM PL205 Series Bedienungsanleitung

IFM

IFM UGR500 Bedienungsanleitung

IFM

IFM LDL100 Bedienungsanleitung

IFM

IFM OF Series Bedienungsanleitung

IFM

IFM PI2798 Bedienungsanleitung

IFM

IFM OY Series Bedienungsanleitung

IFM

IFM efector160 LR2750 Bedienungsanleitung

IFM

IFM efector 160 LR3000 Bedienungsanleitung

IFM

IFM OY4**S Series Bedienungsanleitung

IFM

IFM JN2101 Bedienungsanleitung

Beliebte Zubehör Handbücher anderer Marken

Hillco

Hillco 2810 Bedienungsanleitung

Siemens

Siemens QSA2700D Bedienerhandbuch

Contours

Contours ZY024 Bedienungsanleitung

Saivod

Saivod VS621 Bedienungsanleitung

Virtuox

Virtuox VirtuCLEAN 2.0 Bedienungsanleitung

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Bedienungsanleitung

Z-Wave

Z-Wave HSD-200Z Bedienungsanleitung

turck

turck FMX-IM-2UPLI63FX Bedienungsanleitung

Decagon Devices

Decagon Devices 10HS Bedienungsanleitung

UPPAbaby

UPPAbaby Cup Holder Bedienungsanleitung

Elko

Elko SmartSensor Leakage Wireless Bedienungsanleitung

Grizzly

Grizzly H8371 Bedienungsanleitung

Panasonic

Panasonic HG-T Series Bedienungsanleitung

IFM Electronic

IFM Electronic Efector 250 Series Referenzhandbuch

DigiDesign

DigiDesign 888/24 I/O Bedienungsanleitung

PROZIS

PROZIS QUAY Bedienungsanleitung

patagonia

patagonia PSI Vest Bedienungsanleitung

SFC Energy

SFC Energy EFOY GO! Bedienungsanleitung