IFM OGH3 Series Bedienungsanleitung

Operating instructions

Diffuse reflection sensor

with background suppression

OGH3xx

OGH5xx

704073 / 03 11 / 2019

1 Functions and features

The diffuse reflection sensor detects objects and materials without contact and

indicates their presence by a switching signal.

For the range see the type label (on white paper 200x200 mm, 90 % remission).

2 Installation

►Align the diffuse reflection sensor to the object to be detected.

►Secure the unit to a bracket.

The objects to be detected are to move

transversally to the lens of the sensor.

In case of other directions of movement it

should be tested before whether the swit-

ching function is guaranteed.

3 Electrical connection

►Disconnect power.

►Connect the unit as follows.

Cable Connector Pin connection

L+ BN pin 1

L- BU pin 3

load BK pin 4

load *) WH *) pin 2 *)

Core colours BN = brown, BU = blue, BK = black

*) Seulement pour des appareils avec sortie antivalente.

4 Operating and display elements

  

1: LED

2: [OUT o󰀨]

3: [OUT on]

4 Settings

4.1 The sensor is to switch when the object is detected

►Position the object.

► Press [OUT on] for 2 s.

> The sensitivity is set to the object.

> The LED flashes.

►Remove the object.

► Press [OUT off].

> The sensitivity is set without object.

> The LED goes out. The programming is finished.

4.2 The sensor is not to switch when the object is detected

► Position the object (see figure 1) and press [OUT off] for 2

► Remove the object (see figure 2) and press [OUT on].

The settings can also be carried out first without object and then with object.

4.3 Programming unsuccessful

> LED flashes quickly, 8 Hz.

Possible causes

• Measured value difference too small.

• Max. programming time of 15 min. exceeded.

4.4 Setting of maximum sensitivity

►Align the sensor so that no light is reflected.

The sensor is to switch when the object is detected

► First press [OUT on] and then [OUT off].

The sensor is to switch when the object is not detected

► First press [OUT off], then [OUT on].

4.5 Locking or unlocking the buttons

The unit can be locked electronically to prevent unintentional settings.

► Press [OUT on] and [OUT off] simultaneously for 

10 s.

> Acknowledgement is indicated by a change of the

LED status.

5 Operation

►Check whether the unit operates correctly.

> The LED lights when the switching output is switched.

6 Maintenance

►Keep the lens of the sensor free from soiling.

►For cleaning do not use any solvents or cleaning agents which could damage

the plastic lens.

Technical data and further information at www.ifm.com

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere IFM Zubehör Handbücher

IFM

IFM OGH3 Series Bedienungsanleitung

IFM

IFM JN2101 Bedienungsanleitung

IFM

IFM SDP110 Bedienungsanleitung

IFM

IFM Efector 500 PM2655 Bedienungsanleitung

IFM

IFM OY4**S Series Bedienungsanleitung

IFM

IFM Ecomat 100 EC2082 Leitfaden

IFM

IFM JD Anwendungshandbuch

IFM

IFM O3D300 Bedienungsanleitung

IFM

IFM Efector 160 LR70 Bedienungsanleitung

IFM

IFM SB4 Series Bedienungsanleitung

IFM

IFM SBG2 Series Bedienungsanleitung

IFM

IFM LDL100 Bedienungsanleitung

IFM

IFM PI109 Series Bedienungsanleitung

IFM

IFM Efector 200 OJ51 Series Bedienungsanleitung

IFM

IFM O5E5 Series Bedienungsanleitung

IFM

IFM LW2720 Bedienungsanleitung

IFM

IFM PM11 Bedienungsanleitung

IFM

IFM OID20 Series Bedienungsanleitung

IFM

IFM O3D3 Series Bedienungsanleitung

IFM

IFM LDH100 Bedienungsanleitung

IFM

IFM efector 150 KF Bedienungsanleitung

IFM

IFM MK59 Series Bedienungsanleitung

IFM

IFM OY Series Bedienungsanleitung

IFM

IFM Efector 180 IX5030 Bedienungsanleitung

Beliebte Zubehör Handbücher anderer Marken

Hillco

Hillco 2810 Bedienungsanleitung

Siemens

Siemens QSA2700D Bedienerhandbuch

Contours

Contours ZY024 Bedienungsanleitung

Saivod

Saivod VS621 Bedienungsanleitung

Virtuox

Virtuox VirtuCLEAN 2.0 Bedienungsanleitung

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Bedienungsanleitung

Z-Wave

Z-Wave HSD-200Z Bedienungsanleitung

turck

turck FMX-IM-2UPLI63FX Bedienungsanleitung

Decagon Devices

Decagon Devices 10HS Bedienungsanleitung

UPPAbaby

UPPAbaby Cup Holder Bedienungsanleitung

Elko

Elko SmartSensor Leakage Wireless Bedienungsanleitung

Grizzly

Grizzly H8371 Bedienungsanleitung

Panasonic

Panasonic HG-T Series Bedienungsanleitung

IFM Electronic

IFM Electronic Efector 250 Series Referenzhandbuch

DigiDesign

DigiDesign 888/24 I/O Bedienungsanleitung

PROZIS

PROZIS QUAY Bedienungsanleitung

patagonia

patagonia PSI Vest Bedienungsanleitung

SFC Energy

SFC Energy EFOY GO! Bedienungsanleitung