Impex CB-339 Bedienungsanleitung

NOTE:

Please read all instructions

carefully before using this

product

Table of Contents

Safety Notice

Hardware Identifier

Assembly Instruction

Parts List

Warranty

Ordering Parts

Model

CB 339

Retain This

Manual for

Reference

05-31-02

OWNER'S

MANUAL

COMPETITOR BENCH

CB-339

IMPEX FITNESS PRODUCTS

14777 DON JULIAN RD., CITY OF INDUSTRY, CA 91746

Tel: (800) 999-8899 Fax: (626) 961-9966

www.impex-fitness.com

[email protected]

TABLE OF CONTENTS

BEFORE YOU BEGIN...................................................................................... 1

IMPORTANT SAFETY NOTICE....................................................................... 2

HARDWARE IDENTIFIER.....…....................................................................... 3

ASSEMBLY INSTRUCTIONS........................................................................... 4

EXPLODED DIAGRAM.........................................................................………. 8

PARTS LIST…………………………………………………………………………. 9

WARRANTY.................................................................................................… 10

ORDERING PARTS......................................................................................... 10

BEFORE YOU BEGIN

Thank you for selecting the Competitor Bench CB339 by IMPEX FITNESS

PRODUCTS. For your safety and benefit, read this manual carefully before

using the machine. As a manufacturer, we are committed to provide you

complete customer satisfaction. If you have any questions, or find there are

missing or damaged parts, we guarantee you complete satisfaction through

direct assistance from our factory. To avoid unnecessary delays, please call

our TOLL-FREE customer service number. Our Customer Service Agents

will provide immediate assistance to you.

Toll-Free Customer Service Number

1-800-999-8899

Mon. - Fri. 9 a.m. - 5 p.m. PST

www.impex-fitness.com

[email protected]m

IMPORTANT SAFETY NOTICE

PRECAUTIONS

This exercise machine is built for optimum safety. However, certain precautions apply

whenever you operate a piece of exercise equipment. Be sure to read the entire manual

before you assemble or operate your machine. In particular, note the following safety

precautions:

1. Keep children and pets away from the machine at all times. DO NOT

leave children unattended in the same room with the machine.

2. Only one person at a time should use the machine.

3. If the user experiences dizziness, nausea, chest pain, or any other abnormal

symptoms, STOP the workout at once. CONSULT A PHYSICIAN

IMMEDIATELY.

4. Position the machine on a clear, leveled surface. DO NOT use the machine

near water or outdoors.

5. Keep hands away from all moving parts.

6. Always wear appropriate workout clothing when exercising. DO NOT wear

robes or other clothing that could become caught in the machine. Running

or aerobic shoes are also required when using the machine.

7. Use the machine only for its intended use as described in this manual. DO

NOT use attachments not recommended by the manufacturer.

8. Do not place any sharp object around the machine.

9. Disabled person should not use the machine without a qualified person or

physician in attendance.

10. Before using the machine to exercise, always do stretching exercises to

properly warm up.

11. Never operate the machine if the machine is not functioning properly.

12. A spotter is recommended during exercise.

WARNING: BEFORE BEGINNING ANY EXERCISE PROGRAM, CONSULT YOUR

PHYSICIAN. THIS IS ESPECIALLY IMPORTANT FOR INDIVIDUALS OVER THE AGE

OF 35 OR PERSONS WITH PRE-EXISTING HEALTH PROBLEMS. READ ALL

INSTRUCTIONS BEFORE USING ANY FITNESS EQUIPMENT. IMPEX INC.

ASSUMES NO RESPONSIBILITY FOR PERSONAL INJURY OR PROPERTY DAMAGE

SUSTAINED BY OR THROUGH THE USE OF THIS PRODUCT.

SAVE THESE INSTRUCTIONS.

ASSEMBLY INSTRUCTION

Tools Required Assembling the Machine: Two Adjustable Wrenches and Allen

Wrenches

NOTE: It is strongly recommended two or more people to assemble this machine to

avoid possible injury.

STEP 1 (See Diagram 1)

A.) Connect the Left Upright Beam (#1) and Right Upright Beam (#2) by a Cross Brace

(#3) in the mid-span. Align the holes and secure each end of the Cross Brace with one

Bracket (#16), two M10 x 2 ½” Carriage Bolts (#28), two ∅¾” Washers (#33), and two

M10 Aircraft Nuts (#38).

B.) Place Backrest Adjustment Bar (#5) between the two Upright Beams on the selected

bar holder to obtain desired incline of Backrest.

C.) Insert two Crutches (#7) into the top openings on the Upright Beams. Secure them with

two Lock Knobs (#41) through selected holes to obtain desired height of the Supports.

DIAGRAM 1

STEP 2 (See Diagram 2)

A.) Attach the Main Stabilizer (#21) to the Cross Brace (#3). Secure it with a 4 3/8” x 1 ½”

Bracket (#43), two M10 x 2 ½” Carriage Bolts (#28), ∅¾” Washers (#33), and M10

Aircraft Nuts (#38).

B.) Attach the Front Support (#10) to the Main Stabilizer (#21). Secure it with one M10 x 2

3/8” Allen Bolt (#36) and ∅¾” Washer (#33).

C.)Attach one end of Man Seat Support (#4) to the Main Stabilizer (#21). Secure it with two

M10 x 2 ½” Carriage Bolts (#28), ∅¾” Washers (#33), and M10 Aircraft Nuts (#38).

D.)Attach the other end of Main Seat Support (#4) to the Front Support (#10). Secure it

with two M10 x 1” Carriage Bolts (#29), ∅¾” Washers (#33), and M10 Aircraft Nuts

(#38). DIAGRAM 2

STEP 3 (See Diagram 3)

A.) Attach the hole-side of Backrest Supports (#9) to the pivot on the Main Seat Support

(#4). Secure it with one M12 x 5 7/8” Hex Bolt (#13) and M12 Aircraft Nut (#37). Place

the other end of Backrest Supports rest against the Backrest Adjustment Bar.

B.) Place the Backrest Board (#17) onto the Backrest Supports (#9). Secure it with four

M6 x 1 3/8” Hex Bolts (#31) and ∅½” Washers (#35).

C.)Place the Seat (#18) onto the Main Seat Support (#4). Secure it with four M6 x 1 3/8”

Hex Bolts (#31) and ∅½” Washers (#35).

DIAGRAM 3

DIAGRAM 3DIAGRAM 3

DIAGRAM 3

STEP 4 (See Diagram 4)

A.) Attach the Leg Developer (#6) to the open bracket on the Front Support (#10).

Secure it with one M10 x 3” Allen Bolt (#30), two ∅¾” Washers (#33), and one M10

Aircraft Nut (#38).

B.) Insert the two Foam Tubes (#8) halfway through the holes on the Leg Developer.

Push four Foam Rolls (#20) onto the Foam Tubes.

C.) Attach the Bar Holder (#12) to the Leg Developer (#6). Secure it with a L-shaped

Pin (#15). Remove the Bracket when using the Leg Developer.

D.) Attach the Arm Curl Pad (#19) to the Arm Curl Stand (#11) then secure it with two

M8 x 5/8” Allen Bolts (#32) and two ∅5/8” Washers (#34).

E.) Insert the Arm Curl Stand (#11) into the top opening on the Front Support (#10) and

secure with a Lock Knob (#41). Use the Lock Knob to select the Arm Curl height.

F.) Attach a Spring Clip (#42) to the weight post on the Leg Developer. Attach two

Spring Clips (#42) to the Curl Bar (#14). DIAGRAM 4

PARTS LIST

KEY NO. DESCRIPTION Q’ty

1 Left Upright Beam 1

2 Right Upright Beam 1

3 Cross Brace 1

4 Main Seat Support 1

5 Backrest Adjustment Bar 1

6 Leg Developer 1

7 Crutch 2

8 Foam Tube 2

9 Backrest Support 2

10 Front Support 1

11 Arm Curl Stand 1

12 Bar Holder 1

13 M12 x 5 7/8” Hex Bolt 1

14 Curl Bar 1

15 L-shaped Pin 1

16 Bracket 2

17 Backrest Board 1

18 Seat 1

19 Arm Curl Pad 1

20 Foam 4

21 Main Stabilizer 1

22 1 ¾” Square End Cap 6

23 1 ½” Square End Cap 2

24 1” Square End Cap 2

25 ∅1” End Cap 1

26 ∅1” Cone-shape End Cap 3

27 ∅¾” Cone-shape End Cap 4

28 M10 x 2 ½” Carriage Bolt 8

29 M10 x 1” Carriage Bolt 2

30 M10 x 3” Allen Bolt 1

31 M6 x 1 3/8” Hex Bolt 8

32 M8 x 5/8” Allen Bolt 2

33 ∅¾” Washer 13

34 ∅5/8” Washer 2

35 ∅½” Washer 8

36 M10 x 2 3/8” Allen Bolt 1

37 M12 Aircraft Nut 1

38 M10 Aircraft Nut 11

39 Sleeve 3

40 Plastic Bushing 2

41 Lock Knob 3

42 Spring Clip 3

43 4 3/8” x 1 ½” Bracket 1

Inhaltsverzeichnis

Andere Impex Heim-Fitnessstudio Handbücher

Impex

Impex MARCY TC-5580 Bedienungsanleitung

Impex

Impex MARCY MKB-733 Bedienungsanleitung

Impex

Impex MARCY PRO MWM-5115 Bedienungsanleitung

Impex

Impex MARCY MWM-1840 Bedienungsanleitung

Impex

Impex POWERHOUSE JD 1 Bedienungsanleitung

Impex

Impex Iron Grip Sport IGS-03 Bedienungsanleitung

Impex

Impex MARCY PLATINUM MP 1100 Bedienungsanleitung

Impex

Impex MARCY CLASSIC MWM-977 Bedienungsanleitung

Impex

Impex PM-888 Bedienungsanleitung

Impex

Impex IGS-8861 Bedienungsanleitung

Impex

Impex MARCY AB4050 Bedienungsanleitung

Impex

Impex MARCY SB-510 Bedienungsanleitung

Impex

Impex MARCY MKM-81030 Bedienungsanleitung

Impex

Impex Apex TC-2210 Bedienungsanleitung

Impex

Impex MARCY MWM-7041 Bedienungsanleitung

Impex

Impex CB-202 Bedienungsanleitung

Impex

Impex POWERHOUSE CLUB PWR 6 Bedienungsanleitung

Impex

Impex MACH V Bedienungsanleitung

Impex

Impex APEX WM-348.1 Bedienungsanleitung

Impex

Impex Marcy Pro NS-6023RW Montage- und Bedienungsanleitung

Impex

Impex MARCY PRO 5 Bedienungsanleitung

Impex

Impex Marcy Diamond Elite MD-PWR-20 Bedienungsanleitung

Impex

Impex PREMIER Bedienungsanleitung

Impex

Impex COMPETITOR CB-349 Bedienungsanleitung

Beliebte Heim-Fitnessstudio Handbücher anderer Marken

Horizon Fitness

Horizon Fitness OXFORD 6 Bedienungsanleitung

Energetics

Energetics Multi Trainer 5.1 Bedienungsanleitung

Matrix

Matrix MG-PL Series Bedienungsanleitung

Reebok

Reebok Tbr2i Bedienungs- und Wartungshandbuch

Weider

Weider 8300 Hard Drive Bedienungsanleitung

Pure Fitness

Pure Fitness 8526HE Bedienungsanleitung

Weider

Weider 8700 I Kurzanleitung

Bowflex

Bowflex Sport 001-6961 Bedienungsanleitung

NordicTrack

NordicTrack E8200 Competition Bench Kurzanleitung

Weider

Weider WEMC10161 Bedienungsanleitung

Body Solid

Body Solid GHYP-345 Bedienungsanleitung

Evo

Evo TAHOE 5105 Bedienungsanleitung

cardiobull

cardiobull RA17 Bedienungsanleitung

ParaBody

ParaBody 40 Bedienungsanleitung

JLL

JLL Ventus Pro Air Power Bedienungsanleitung

Trojan

Trojan Colorado 370 Bedienungsanleitung

Octane Fitness

Octane Fitness xRide xR650 Bedienungsanleitung

Precor

Precor Discovery Series Bedienungsanleitung