Ingenico Elite 770 Bedienungsanleitung
Version May 1999
1
ELITE 770 *
U
ser's Manual
Version May 99
Terminal ELITE 770
2
Version May 1999
3
INGENICO
9, quai de Dion Bouton
92816 Puteaux cedex
RCS Nanterre B 317 218 758-SIRET 317 218 758 00033
DIV0510A
Table of contents
I-PRESENTATION OF THE TERMINAL 5
1-Introduction 5
2-The Terminal 6
3-The connections 6
4-The Keyboard-Principles of Utilisation 8
5-The Card Reader 9
6-Portable Functioning 9
II-ELITE 770 TECHNICAL OVERVIEW 11
1-Terminal feature 11
2-Display 11
3-Printer 11
4-RS232 Interface 12
5-RS232 Connection 12
6-Modem 13
7-SIM Interfaces 13
8-Technical Specifications 14
III-PROCEDURES OF INSTALLATION 16
1-Configuring Radio Link 16
2-Entering the Date and the Time 17
3-Telephone Network Parameters 18
Terminal ELITE 770
4
4-Configuration Receipt 19
5-Option « Table Number »19
6-Application Software Downloading Procedure 20
IV-SECURITY RECOMMANDATIONS 21
Version May 1999
5
I-Presentation of the terminal
1-Introduction
The ELITE 770 is a portable payment terminal. This terminal was created to process all
payments made by magnetic or smart cards.
The ELITE 770 terminal benefits from a modular conception which permits it to treat all cards of
different types using separate corresponding programs. It is therefore important to understand
the manner in which it functions, at the modular and the terminal level.
0The Modular Level
These functions link up with and correspond to the many different types of cards that the terminal
processes, the most important of which is the principal function of payment.
0The Terminal Level
There are a certain number of functions that are the concern of a ‘global treatment’ and not of a
particular module. The terminal level is the superior level and is common to all modules. This
level does not depend on the number or the nature of each module.
In its base version the ELITE 770 terminal is equipped with a module
that permits it to process Bank Cards. Your retailer or installer will be
able to give you all the necessary information on all modules on offer
and their installation details.
Terminal ELITE 770
6
2-The Terminal
The terminal case contains the following elements:
The portable terminal itself,
•A base.
•The cable that connects the terminal to a telephone line.
•The block sector that connects the terminal to a 115 or 230 volts power point
(depending on the country)
3-The connections
0Telephonic Connection
The compact telephonic cable connection
that is supplied with the Elite terminal, must
be introduced into the terminal plug, marked
with the symbol . The telephone
connection (RJ11) must be introduced into
the telephone socket in the wall.
.
Telephonic line
0Electrical Connection
The small jack connection to the block sector
is plugged into the connection marked with
the symbol on the terminal. The twin
pronged electrical plug of the block is
connected to an electrical point of 115 or
220 volts (depending the country).
Power Supply
0Connection with an External Peripheral
Certain peripheral devices such as a check
reader can also be connected.
Version May 1999
7
The ELITE 770 terminal must be powered
off before connecting the cable on the base,
to the RS232 port..
Serial port
Version May 1999
8
4-The Keyboard -Principles of Utilisation
•The key permits the operator to access the corresponding modular level
functions
•The and keys permit to access to the terminal level functions and
to the system menu
•The key ↑↑ permits a paper feed of a couple of centimetres
•The GREEN key permits the validation of any information read by
or entered into the terminal
•The REDkey cancels the occurring command after which, it returns
theterminal to the idle state
•The YELLOW key deletes the last character entered, and is used
in certain cases where an override is requested
•The key marked 00 can only be used for entering amounts ;
more particularly it permits the operator to enter amounts incents
Version May 1999
9
5-The Card Reader
0Magnetic Stripe Card
The card can be read either swiped from right to left, or from left to right. The magnetic
track on the card turned on the rear side of the terminal and the card should be swiped
through the track reader freely and without hesitation.
0Micro Chip Card
Introduce the card horizontally into the apparatus, the micro-chip facing up, as indicated
and leave the card in position for the length of time that it takes to process the
transaction.
6-Portable Functioning
The ELITE 770 terminal is portable; it includes batteries which permit to make 150
transactions without connection to the base.
A star on the upper right side of the display indicates a correct connection between the
terminal and its base.
A battery low is indicated by a message « -BAT-» on the display following by a beep.
The terminal continues to run during about 40 transactions, but batteries need to be
reloaded during at least 14 hours.
In a portable mode, the ELITE 770 terminal enters in a wait state automatically after 20
seconds of inactivity or after hitting the RED key.
The message «-RANGE-» appears on the terminal display when the terminal is
out of range of the base, during a communication establishment. To work properly,
put the terminal nearer the base (about 100 meters in open air, 40 meters inside a
building depending on the environment).
The message «-BUSY-» appears during a connection with the base when an
other terminal is already in communication with this base. The operator must wait
the end of the communication between the base and the other terminal.
The message «-FULL-» appears when the terminal wants to connect a base
which already has the right number of terminal. In this case, switch off the base
during a few seconds, and launch a profile on each terminal (System menu-
Terminal ELITE 770
10
configuration) of the network. If the problem persists, switch off the base and call
your maintenance company.
Before the first use of the terminal, batteries must be
loaded during at least14 hours.
Andere Handbücher für Elite 770
1
Inhaltsverzeichnis
Andere Ingenico Zahlungsterminal Handbücher
Ingenico
Ingenico iWL200 Series Bedienungsanleitung
Ingenico
Ingenico Link 2500 Bedienungsanleitung
Ingenico
Ingenico Move 5000 Bedienungsanleitung
Ingenico
Ingenico iCT220, iCT250 Gebrauchsanweisung
Ingenico
Ingenico iCT220, iCT250 Bedienungsanleitung
Ingenico
Ingenico iCT2XX Bedienungsanleitung
Ingenico
Ingenico IWL220 GPRS Bedienungsanleitung
Ingenico
Ingenico i9500 Bedienungsanleitung
Ingenico
Ingenico Self/5000 Bedienungsanleitung
Ingenico
Ingenico iCT220, iCT250 Bedienungsanleitung
Ingenico
Ingenico iCT220, iCT250 Bedienungsanleitung
Ingenico
Ingenico Desk/2600 Bedienungsanleitung
Ingenico
Ingenico i6780 Bedienungsanleitung
Ingenico
Ingenico iCT250E Bedienungsanleitung
Ingenico
Ingenico i7780 Bedienungsanleitung
Ingenico
Ingenico AXIUM EX8000 Bedienungsanleitung
Ingenico
Ingenico iUP 250 Bedienungsanleitung
Ingenico
Ingenico iWL250G Bedienungsanleitung
Ingenico
Ingenico Link/2500 Kurzanleitung
Ingenico
Ingenico AXIUM DX8000 Bedienungsanleitung
Beliebte Zahlungsterminal Handbücher anderer Marken
Ingenico group
Ingenico group Lane/8000 Bedienungsanleitung
Gilbarco
Gilbarco FlexPay IV CRIND Installations- und Betriebshandbuch
Infinite Peripherals
Infinite Peripherals Infinea Tab Lite Bedienungsanleitung
PAX
PAX S920 Bedienungsanleitung
dejavoo
dejavoo Z Series Bedienungsanleitung
VeriFone
VeriFone VX 520 Series Bedienungsanleitung
