Insize ISM-WF200 Bedienungsanleitung

WIFI DIGITAL MEASURING MICROSCOPE

OPERATION MANUAL

MN ISM-WF200- -E

www.insize.com

ISM-WF200

1 2

Thank you for choosing ISM-WF200 microscope!

The ISM-WF200 microscope is an exciting and dual-usage digital

microscope; it can be used either with a WiFi connection or

with a USB wired connection. The dual-usage microscope enables

you to clearly study micro-objects, the WiFi connect not

only gives you freedom to move away from a laptop/PC, it also

enables you to share your study with others connected to the

WiFi. The ISM-WF200 has a wide scope of applications, such as,

 Industrial Inspection

 Computer Parts inspection

 Telecom module inspection

 Scientific teaching tool

 Medical analysis

 School Research tool

 Insect dissection / examination

 Plant dissection / examination

 Skin examination

 Textile Inspection

 Collections / Coin/ Jewelry Inspection

 Printing Inspection

 And more…………..

Please read this manual carefully before using ISM-WF200

microscope!!!

1. Avoid touching the lens.

2. Protect the product from electrostatic damage.

3. Do not attempt to disassembly any part of this product.

4. Do not attempt to service this product yourself. Opening the

covers may expose you to dangerous

voltage points or other risks.

5. Store and operate ISM-WF200 microscope at Temp: -20 ~ 45°C,

Humidity: 45% ~ 85%, storing

and operating outside these limits may reduce the life of the product.

6. Do not expose this product to water or other liquids. If water or

other liquids enter the product,

immediately power off the product. Continued use of the product may

result in fire or an electrical

shock.

7. Do not use any detergent or volatile solution, as this will damage

the camera case, painted surfaces

and lens. To clean the product uses only a soft cleaning cloth.

8. Do not place this product near a heat source or expose direct

flame, avoid the lens damaged by

high temperature or humidity

9. If the lens is dirty, please use a kens brush on soft cloth to wipe

clean. Avoid touching it with your

fingers. Exercise care to avoid scratching the lens.

10. Need to read ISM-WF200 microscope User’s Manual before

using and storing it.

11. To avoid electric shock, remove all electricity source before

removing PC.

Description Attention

3 4

Structure

The Power “OFF/USB—WiFi” Switch:

WiFi: ISM-WF200 Microscope works in WiFi mode when switch is

moved to “WiFi” side.

OFF/USB: Power-off WiFi Microscope when switch is moved to

“OFF/USB” side; also, USB microscope works if connected to PC’s

USB port via MiniUSB cable.

WiFi Indicator (Blue LED):

Flashing light indicates data transmission; Constant light indicates

no data transmission.

Power Indicator (Blue LED):

Lights when power on WiFi or connected to PC or AC adaptor via

MiniUSB cable.

Battery Indicator (Blue LED or Red LED):

Red LED lights when battery level low; Blue LED lights when battery

charging full.

Charge Indicator (Red LED):

Lights when the battery is being charged; turn off when the

battery is fully charged.

Charging Instructions:

Connect the DC Adapter (plug the AC adapter into an AC outlet) or

PC’s USB cable, it charges whether the power switch is on WiFi or

OFF/USB. (We DO NOT recommend charging WiFi Microscope while

using)

1. Download and install the “ISM-PAD” app from “App Store”

or the Disc enclosed for your Windows or IOS device.

Note 1: Search “ISM-PAD” in App Store.

2. Slide the Power switch to the “WiFi”, and the power LED

indicator will light, wait for ~20 seconds until the WiFi indicator

and the illumination LEDs light, then the WiFi signal will be

transmitting correctly.

3. Check the wireless connection on your Phone/Tablet or PC

and a list of available networks will appear. Select the SSID

“WiFi2SCOPE_xxxxxx” network from the list to connect; the

network “WiFi2SCOPE_xxxxxx” requires a password: enter the

password “12345678” and click Ok.

4. Once connected, open the “ ISM-PAD” application to see

your images. The WiFi indicator LED flashes and video stream

signal should be displayed in the app. Video streaming can be

broadcasted to many devices, but the frame rate of live video

will decrease as the number of receiving devices increase.

Capture photo or record video (You must set the pixel resolution

to 640x480 when recording video).

Using with iPad

5 6

Photos folder or videos folder.

Navigation icon—moving a dot left/up/down/right for

calibration or measurement operation.

Calibration and measurement icon.

Switch between photo taking and video.

Resolution Setting When changing the resolution, you must

wait until the illumination LED is off and lights up again

before clicking live video ‐ it takes about 5 seconds).

. (

Calibration and Measurement’s Guide:

To obtain the accurate measurement data, please calibrate before

any measurement function at each magnification. Use the enclosed

calibration ruler as the to-be-observed object. Bring photo into focus

by turning the “Focus & Magnification adjustment wheel”; Click to

pop‐up this below screen:

Click “ Calibration”to back the live video, click two dots (

the dot by clicking navigation icons,which draw a your desired line,

then click on the live video to pop-up this screen:

moving

Input the actual length of the line; click “ ok” and on the live

video to pop-up this below screen:

Now the calibration is completed, you can make measurement

features accurately on the live video at this same focus. (Don’t

subsequently adjust the “Focus & Magnification adjustment wheel”)

If the new photo object is not in focus, please only adjust the distance

between the microscope and the object till the photo is clear. This

measurement data can be saved inside the taken photo.

Using with Windows in WiFi mode

Double‐click ISM‐WF Partner icon after completing installation

to pop‐up the below screen:

7 8

Click “ Preview ” icon and the ISM‐WF200 main screen will

display video as below: (it waits about 5 seconds to display video; if

the frame rate of live video is slow, please click “Preview” icon once

again to try.)

Menu:

File

Select a photo or video, click “File”on menu bar or right‐key

to pop‐up the drop‐down menu for operation.

Open: Open the selected photo or video to be viewed.

Save As: Save the selected photo or video file as the desired

folder and file format.

Delete: Delete the selected photo or video.

Delete All: Delete the all photos or videos in the photo or video

folder.

E‐Mail: Email the selected photos through your default email

account.

Favorites: Open the folder which contains the captured photos

and recorded videos.

Setting

Device Setting: Select “ Video setting”to pop‐up the window

below for video parameter setting:

When you change the resolution, you must wait until the

illumination LED is off and lights up again before clicking OK-it

takes about 5 seconds.

Setting: click to pop‐up the pen setting: ( If the " Line width" is

2 or 3 Pixel, the "Pen Type" must be Solid-Line)

Language: The language selection allows you to select the

ISM‐WF200 interface language.

Capture

Take Picture: You can capture a photo by clicking the snapshot

Button .

Take/Stop Video: In the active live video window, click on to

record a video.

1. Frame rate: is the number of frames or photos that are

projected or displayed per second. The number range is 1~30.

2. Timer limit: is the time of video recording to avoid video file

size exceeding the disk space. The number range is 1~99999.

Take time‐lapsed pictures: Press the time‐lapsed button on

the active preview window

Video Processing

Please click “Preview” to resume the live video after finished

operation of video processing below.

Horizontal Mirror

Vertical Mirror

Negative

Binary Segmentation

Monochrome display (Red)

Monochrome display (Green)

Monochrome display (Blue)

Calibration on Video:

It is strongly suggestion: To obtain the accurate measurement

data, please calibrate before any measurement function at each

magnification.

Select a known measurement standard as the to-be-observed

object, such as a ruler, to be used for calibration. Bring photo

of the selected ruler into focus by turning the “ Focus &

Magnification adjustment wheel” , determine the magnification

by taking a reading from the scale on the focus dial as below:

Enter the scale value in the “ Scale” box in the right‐hand

scale box of the screen as below:

11 12

In the live video window click on the calibration button , and then

click and drag to 2mm length, a small window pop up, enter the actual

length(The example is 2mm) to click “OK” Button.

The software will automatically calibrate the scale of

magnification and will show the calibrated scale of magnification

at the right‐hand box of calibration button as below:

Now the calibration is completed, you can make measurement

features accurately on taken photos or real‐time video at this

focus point (Don’t subsequently adjust the “Focus & Magnification

adjustment wheel”).If the new photo object is not in focus, please

only adjust the distance between the microscope and the object till

the photo is clear, and then capture the photo to measure it.

Line measurement:

This allows you to measure the linear distance between two

points. Simply click and drag to the desired length, and click

again to finish.

Point to Line Measurement

This allows measurement of a line 90 degree from a certain line.

Simply create a line to represent the base by clicking once to

start, drag, and then click again to set the endpoint. Branch off

from the base line to start measuring the line that is 90 degree

from the base line and a final click to finish the measurement.

Continuous Line Measurement

This allows measurement of the distance between multiple

connecting lines. Simply click and drag to form one section

of distance, click again to start another section. Continue

until the total desired distance is measured. Double‐click to

finish.

Polygon Measurement

This allows measurement of a polygon. Simply click and drag

to form the desired length, and click again to start the next

section, double‐click to finish the polygon measurement.

Radius of Circle Measurement

This allows you to measure the circumference, area, and radius

of a circle. Simply click and extend out to the desired radius.

Diameter of Circle Measurement

This allows you to measure the circumference, area, and radius

of a circle. Simply click and extend out to the desired diameter.

Three Point Circle Measurement

This allows the measurement of the circumference, area, and

radius of a circle. Simply click on any three points on the circle

you wish to measure.

13 14

Three Point Arc Measurement

This allows a measurement of an arc. Click on three consecutive

points on an arc to measure.

Three Point Angle Measurement

This allows the measurement of an angle. Start at the pivot point

and extend out to start measuring an angle.

Four Points Angle Measurement

This allows the measurement of an angle by selecting four points.

Simply select two points from one line segment and another two

points from another line segment to complete the angle

measurement.

Photo Viewing, Measure and Calibration

You can double‐click the selected Photo to measure and view it

as below shown:

For measure, please enter the magnification if there is not

number. The number is the scale value of roller at the baseline

of the captured photo.

Photo file name: yyyymmddhhmmss_nnnx_Nxxxx is combined by

date, time, magnification and serial number. For example,

Still_2009‐03‐06_102949_060X_N0002 figures: Number is

0002, magnification is 60, date is Mar‐06‐2009, time is

AM10:29:49.

The program will auto load the magnification when you measured

it if you put the scale before you capture the photo.

:Open a photo for measure from a folder.

: Save as

: Print this photo.

: Select one target.

: Measure function items.

: Pen setting.

: Add text into photo.

: Delete the selected target.

: Move the selected target.

: Calibration.

Andere insize Mikroskop Handbücher

insize

insize ISM-DLC120 Bedienungsanleitung

insize

insize ISM-PM100 Bedienungsanleitung

insize

insize ISM-ZS30 Bedienungsanleitung

insize

insize ISM-WM200 Bedienungsanleitung

insize

insize ISM-DL120 Bedienungsanleitung

insize

insize ISM-DL301 Bedienungsanleitung

insize

insize ISD-A100 Bedienungsanleitung

insize

insize ISM-M1000 Bedienungsanleitung

insize

insize ISM-ZS50 Bedienungsanleitung

Beliebte Mikroskop Handbücher anderer Marken

Thermo Scientific

Thermo Scientific Nicolet iN10 Leitfaden

National

National DC3-163 Bedienungsanleitung

KERN Optics

KERN Optics OPE-1 Bedienungsanleitung

OPTIKA MICROSCOPES

OPTIKA MICROSCOPES B-150D Bedienungsanleitung

Prior

Prior Lux POL Bedienungsanleitung

Opitec

Opitec Smartscoop 115615 Bedienungsanleitung

KERN

KERN OPO-1 Bedienungsanleitung

Topcon

Topcon SP-1P Bedienungsanleitung

Motic

Motic PA43 Bedienungsanleitung

Leica

Leica DVM5000 Benutzerhandbuch

MshOt

MshOt MZ62 Bedienungsanleitung

KERN Optics

KERN Optics OZR-5 Bedienungsanleitung

VWR

VWR VisiScope 384 Series Bedienungsanleitung

Nikon

Nikon ECLIPSE E200 POL Bedienungsanleitung

Leica

Leica DI C800 Handbuch

ThermoFisher Scientific

ThermoFisher Scientific Continuµm Bedienungsanleitung

ThermoFisher Scientific

ThermoFisher Scientific Continuµm Bedienungsanleitung

Olympus

Olympus SZ61 Bedienungsanleitung

insize ISM-WF200 Bedienungsanleitung

Beliebte Mikroskop Handbücher anderer Marken