Inspur NX8840 Bedienungsanleitung

Dear users of Inspur server:

Sincerely than you for selection of Inspur server!

This manual introduces the technical characteristics and the system

installation and setup of the server, and helps you to particularly understand

and expediently use this server.

Please deliver the package of our product to the waste recycling station

for recycling, in favor of pollution prevent and beneﬁt the humankind.

This manual is the property of the Inspur Group Co., Ltd.

This User Manual is not to be copied by any group or person in any

manner without the consent of Inspur Group Co., Ltd. The Inspur Group

Co., Ltd. reserves the right of revise this manual momentarily.

Any alteration about the content of this manual will be noticed.

Please contact Inspur Group Co., Ltd., if you have any questions or

advice about this manual.

Inspur Group Co., Ltd.

1st 2013

“Inspur” is registered trademark of Inspur Group Co., Ltd.

Other trademarks belong to other corresponding registered companies.

Statement

Please read the following statement before you use this server formally. Only

when you have read this statement hereinafter and agreed the following terms, you can

formally use this server. If you have any questions about the following terms, please

contact our supplier or us directly. If you have no questions about these terms and start

to use this server, it acquiesces that you have agreed the following terms.

1. We must call your attention that you must not alter any other parameters in

the main board BIOS of this server at any time, except for the parameters which we

promote that you can alter.

2. If there are any hardware problems when you use this server, or you wish

to upgrade the hardware, please feed back the detail hardware conﬁguration of your

computer to our Customer Service. Don’t disassemble the server case or any hardware

components in the case by yourself.

3. In this server, the MEMORY, CPU, CPU Fan and Fan are in given standard.

Please don’t use them with the corresponding components of any other computers

confusedly.

4. When you have any software problems during the application of this server,

we hope that you ﬁrstly contact the corresponding software supplier and then he will

the software problems about the database, the installation and running of the network

management software or other networking product.

5. Please firstly read the accompany Brief User Guide, when you install this

server. Please contact our Customer Service Center, if you have any questions about the

application.

6. We must call your attention that in the application process, you should pay

attention to do necessary backup of your ﬁle.

7. The copyrights of the markers and names of the software and hardware product

referred in this manual are the property of corresponding companies.

8. In the above statement, “us” indicates the Inspur Group Co., Ltd. The Inspur

Group Co., Ltd. holds the right of ﬁnal explanation about the above statement.

Safety Information

In order to guarantee your personal safety, avoid any risk of damaging system and

usage environment, please make sure to read this part carefully, and execute according

to this strictly, before installing and using this product.

Note: In order to help you use the equipment, the following considerations

can help avoid the occurrence of problems that may damage the components or

cause data loss etc.

1. In case of the following cases, please unplug the power line plug of products

from the power socket and contact customer service department of Inspur:

— The power cables, extended cables or power plugs are damaged.

— The products get wet by water.

— The products have fallen off or been damaged.

— Objects fall into the products.

— When operating according to the operation instructions, the products cannot

function normally.

2. If the system becomes damp, please dispose according to the following steps:

— Switch off the power supplies of the system and the equipment, disconnect

them with the power socket, wait for 10 to 20 minutes, and then open the cover of the

host.

— Move the equipment to the ventilation place to dry the system at least for 24

hours and make sure that the system is fully dried.

— Close the cover of the host, re-connect the system to the power socket, and

then start the equipment.

— In case of operation failure or abnormal situation, please contact Inspur and get

technical support.

3. Pay attention to the position of the system cables and power cables, wire them

in places not to be stepped on or knocked down and ensure not to place other objectives

on the cables.

4. Before dismounting the cover of host or contacting the internal components,

you shall cool down the equipment first; to avoid damaging the main-board, please

power off the system and wait for 5 seconds, and then dismount the components from

the main-board or disconnect the connection of peripheral equipment of the system.

5. If there are modulator-demodulator, telecommunication or local area network

options in the equipment, please pay attention to the following matters:

— In case of thunder and lightning weather, please do not connect or use the

modulator-demodulator. Otherwise, it may be subject to lightning strike.

— Never connect or use modulator-demodulator in moist environment.

— Never insert the modulator-demodulator or telephone cables to the socket of

network interface controller (NIC).

— Before unpacking the product package, contacting or installing internal

components or contacting un-insulated cables or jacks of the modulator-demodulator,

please disconnect the modulator-demodulator cables.

6. In order to prevent the electrostatic discharge from damaging the electronic

components in the equipment, please pay attention to the following matters:

— You shall conduct off the static electricity on the body before dismounting or

contacting any electronic component in the equipment. You can conduct off the static

electricity on the body by contacting the metal earthing objects (such as the unpainted

metal surface on the chassis) to prevent the static electricity on the body from

conducting itself to the sensitive components.

— For electrostatic sensitive components not ready to be installed for application,

please do not take them out from the antistatic package materials.

— During the work, please touch the earthing conductor or the unpainted metal

surface on the cabinet regularly to conduct off the static electricity on the body that

may damage the internal components.

7. When dismounting the internal components with the approval of Inspur, please

pay attention to the following matters:

— Switch off the system power supply and disconnect the cables, including

disconnecting any connection of the system. When disconnecting the cables, please

grab the connector of cables and plug it out, and never pull the cables.

— Before dismounting the cover of cabinet or touching the internal components,

the products need to be cooled down.

— Before dismounting and touching any electronic component in the equipment,

you shall conduct off the static electricity on the body by touching the metal earthing

objectives.

— During the dismounting process, the operation shall not be too big, so as to

prevent damage to the components or scratching of the arms.

— Carefully deal with the components and plug-in cards, and please never touch,

the components or connection points on the plug-in cards. When taking the plug-in

cards or components, you should grab the edges of the plug-in cards or components or

their metal ﬁxed supports.

8. During the process of cabinet installation and application, please pay attention

to the following matters:

— After the installation of cabinet is ﬁnished, please ensure that the supporting

feet have been ﬁxed to the rack and supported to the ground, and all weight of the rack

have been fell onto the ground.

— It shall install into the cabinet according to the sequences from the bottom to

the top, and ﬁrst install the heaviest component.

— When pulling out the components from the cabinet, it shall apply force slightly

to ensure the cabinet to keep balance and stabilization.

— When pressing down the release latch of the sliding rail of components and

sliding in or out, please be careful, as the sliding rail may hurt your ﬁgures.

— Never make the AC power branch circuit in the cabinet overload. The sum of

cabinet load shall not exceed 80% of the ratings of branch circuits.

— Ensure that components in the cabinet have good ventilation.

— When repairing components in the cabinet, never step on any other

components.

Warning: the following warnings show that there are potential dangers that

may cause property loss, personal injury or death:

Warning 1: The power supply equipment in the system may generate high voltage

and dangerous electrical energy and thus cause personal injury. Please do not dismount

the cover of the host or to dismount and replace any component in the system by

yourself, unless otherwise informed by Inspur; only maintenance technicians trained

by Inspur have the right to disassemble the cover of the host, dismount and replace the

internal components.

Warning 2: Please connect the equipment to appropriate power supply, and

the power should be supplied by external power supply which is indicated on the

rated input label. To prevent your equipment from damages caused by momentary

spike or plunge of the voltage, please use relevant voltage stabilizing equipment or

uninterruptible power supply equipment.

Warning 3: If extended cables are needed, please use the three-core cables

matched with correct earthed plug, and check the ratings of the extended cables to

make sure that the sum of rated current of all products inserted into the extended cables

do not exceed 80% of the limits of the rated currents of the extended cables.

Warning 4: Please be sure to use the supplied power supply component, such

as power lines, power socket (if supplied with the equipment) etc. For the safety of

equipment and the user, do not replace randomly power cables or plugs.

Warning 5: To prevent electric shock dangers caused by leakage in the system,

please make sure that the power cables of the system and peripheral equipment are

correctly connected to the earthed power socket. Please connect the three-core power

line plug to the three-core AC power socket that is well earthed and easy to access, be

sure to use the earthing pin of power lines and do not use the patch plug or the earthing

pin unplugged with cables. In case of the earthing conductors not installed and it is

uncertain whether there are appropriate earthing protections, please do not operate or

use the equipment. Contact and consult with the electrician.

Warning 6: To avoid short circuit of internal components and ﬁre or electric shock

hazards, please do not ﬁll any object into the open pores of the system.

Warning 7: Please place the system far away from the cooling plate and at the

place with heat sources, and be sure not to block the air vents.

Warning 8: Be sure not to scatter food or liquid in the system or on other

components, and do not use the product in humid and dusty environment.

Warning 9: The replacement of batteries with those of another model may

cause explosion. When replacement of batteries is required, please consult first the

manufacturer and choose batteries of the same or a similar model recommended by the

manufacturer. Do not dismount, extrude and pink the batteries or make the external

connection point short circuit, and do not expose them in the environment over 60°C.

Never throw them into ﬁre or water. Please do not try to open or repair the batteries,

and be sure to reasonably deal with the ﬂat batteries and do not put the ﬂat batteries,

the circuit boards that may include the batteries and other components with other

wastes. For relevant battery recovery, please contact the local waste recovery and

treatment mechanism.

If what you bought is the chassis, besides carefully read the installation

description attached with the cabinet products and get known about the special warning

notices and installation process, you must abide by the following preventive measures

to guarantee the cabinet to be stable and safe:

Warning 10: Before installing equipment in the chassis, please install front

and side supporting feet on the independent chassis; for cabinet connecting with

other chassis, it shall install the front supporting foot first. If you fail to install

correspondingly the supporting foot before installing equipment in the chassis, it may

cause the cabinet to turn over in some cases, and thus may cause personal injury.

Therefore, it is necessary to install supporting feet before installing equipment in the

chassis. After installing the equipment and other components in the chassis, it can only

pull out one component from the cabinet through its sliding component at one time.

Pulling out several components at the same time may lead the cabinet to turn over and

cause serious personal injury.

Warning 11: Please do not move the chassis independently. Considering the height

and weight of the chassis, at least two people are needed to complete its movement.

Warning 12: Declaration

The product is Grade A product, and in the living environment, it may cause

radio interference. In such case, it may need the user to take feasible measures for the

interference.

Regarding the Manual

●Product Description

●System BIOS

●Operating System Installation

●Integrated Raid Systems

●Common Problem and Trouble-shooting

We suggest you read this manual seriously before you use this server for fear the

unnecessary faults in your operation.

Technical Service Tel.: 86-531-88546554

Address: NO.1036 Langchao Road, Jinan, China, Inspur Group Co., Ltd

Post Code: 250101

Content

Chapter One NX8840 Computer Blade Overview..................................................1

1.1 NX8840 Computer Blade Technical Speciﬁcation .......................................1

1.2 NX8840 Computer Blade View ....................................................................1

1.3 NX8840 Computer Blade Unit Interface and Indicator Introduction ...........1

1.4 Usage of NX8840 Computer Blade ..............................................................2

1.5 Jumper Setting...............................................................................................2

Chapter Two System BIOS .......................................................................................5

2.1 How to Enter the BIOS Setup .......................................................................5

2.2 BIOS System Menu Introduction..................................................................5

Chapter Three Operation System Installation ........................................................18

3.1 Manual Installation of Windows Server 2008 R2 .........................................18

3.2 Manual Installation of Red Hat Enterprise Linux 6.2 ...................................23

Chapter Four Integrated RAID System...................................................................28

4.1 How to Enter SATA RAID Conﬁguration Interface......................................28

4.2 Application of Control Keys .........................................................................28

4.3 SATA RAID Conﬁguration ...........................................................................28

Chapter Five Common Problems and Troubleshooting.........................................32

5.1 Restart the machine .......................................................................................32

5.2 Failure occurs when starting the machine.....................................................32

5.3 Other notices .................................................................................................35

5.4 Technical support information.......................................................................36

Inhaltsverzeichnis

Andere Inspur Server Handbücher

Inspur

Inspur NF5180M5 Bedienungsanleitung

Inspur

Inspur SA5112M4 Bedienungsanleitung

Inspur

Inspur Yingxin Bedienungsanleitung

Inspur

Inspur NF8260M5 Bedienungsanleitung

Inspur

Inspur NP5540M3 Bedienungsanleitung

Inspur

Inspur Yingxin Bedienungsanleitung

Inspur

Inspur NE5260M5 Bedienungsanleitung

Inspur

Inspur NF5180M6 Bedienungsanleitung

Inspur

Inspur Yingxin NF5280M2 Bedienungsanleitung

Inspur

Inspur NF5488A5 Bedienungsanleitung

Inspur

Inspur NF5280M5 Bedienungsanleitung

Inspur

Inspur NF8260M6 Bedienungsanleitung

Inspur

Inspur NF5486M5 Bedienungsanleitung

Inspur

Inspur NF5266M6 Bedienungsanleitung

Inspur

Inspur NE5260M5 Bedienungsanleitung

Inspur

Inspur NF5180M4 Bedienungsanleitung

Inspur

Inspur NF5270M3 Bedienungsanleitung

Inspur

Inspur 3408 Series Merkblatt

Inspur

Inspur Tiansuo TS860 Bedienungsanleitung

Inspur

Inspur NF8480M5 Bedienungsanleitung

Inspur

Inspur i48M6 Bedienungsanleitung

Inspur

Inspur NF5488M5 Bedienungsanleitung

Inspur

Inspur Tiansuo TS860 Bedienungsanleitung

Inspur

Inspur NF5468A5 Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung