Intel MFSYS25 - AXXPSU 1000W Power Supply Module Bedienungsanleitung

Intel® Modular Server System MFSYS25 to

Promise* VTrak E-Class Connection Guide

A Guide for Technically Qualified Assemblers of Intel®Identified Subassemblies/

Products

Intel Order Number E64781-001

ii Intel® Modular Server System MFSYS25 to Promise* VTrak E-Class Connection Guide

Disclaimer

Information in this document is provided in connection with Intel® products. No license, express or implied, by

estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Intel's

Terms and Conditions of Sale for such products, Intel assumes no liability whatsoever, and Intel disclaims any

express or implied warranty, relating to sale and/or use of Intel® products including liability or warranties relating to

fitness for a particular purpose, merchantability, or infringement of any patent, copyright or other intellectual property

right. Intel products are not designed, intended or authorized for use in any medical, life saving, or life sustaining

applications or for any other application in which the failure of the Intel product could create a situation where

personal injury or death may occur. Intel may make changes to specifications and product descriptions at any time,

without notice.

Intel®server boards contain a number of high-density VLSI and power delivery components that need adequate

airflow for cooling. Intel's own chassis are designed and tested to meet the intended thermal requirements of these

components when the fully integrated system is used together. It is the responsibility of the system integrator that

chooses not to use Intel developed server building blocks to consult vendor datasheets and operating parameters to

determine the amount of airflow required for their specific application and environmental conditions. Intel

Corporation can not be held responsible if components fail or the server board does not operate correctly when used

outside any of their published operating or non-operating limits.

Intel, Intel Pentium, and Intel Xeon are trademarks or registered trademarks of Intel Corporation or its subsidiaries in

the United States and other countries.

* Other names and brands may be claimed as the property of others.

Intel® Modular Server System MFSYS25 to Promise* VTrak E-Class Connection Guide iii

Safety Information

Important Safety Instructions

Read all caution and safety statements in this document before performing any of the

instructions. See also Intel Server Boards and Server Chassis Safety Information on the

Intel®Server Deployment Toolkit CD and/or at

http://support.intel.com/support/motherboards/server/sb/cs-010770.htm.

Wichtige Sicherheitshinweise

Lesen Sie zunächst sämtliche Warnund Sicherheitshinweise in diesem Dokument, bevor

Sie eine der Anweisungen ausführen. Beachten Sie hierzu auch die Sicherheitshinweise zu

Intel-Serverplatinen und Servergehäusen auf der Intel®Server Deployment Toolkit CD

oder unter http://support.intel.com/support/motherboards/server/sb/cs-010770.htm.

Consignes de sécurité

Lisez attention toutes les consignes de sécurité et les mises en garde indiquées dans ce

document avant de suivre toute instruction. Consultez Intel Server Boards and Server

Chassis Safety Information sur le Intel®Server Deployment Toolkit CD ou bien rendez-

vous sur le site http://support.intel.com/support/motherboards/server/sb/cs-010770.htm.

Instrucciones de seguridad importantes

Lea todas las declaraciones de seguridad y precaución de este documento antes de realizar

cualquiera de las instrucciones. Vea Intel Server Boards and Server Chassis Safety

Information en el Intel®Server Deployment Toolkit CD y/o en

http://support.intel.com/support/motherboards/server/sb/cs-010770.htm.

重要安全指导

iv Intel® Modular Server System MFSYS25 to Promise* VTrak E-Class Connection Guide

Warnings

Heed safety instructions: Before working with your server product, whether you are

using this guide or any other resource as a reference, pay close attention to the safety

instructions. You must adhere to the assembly instructions in this guide to ensure and

maintain compliance with existing product certifications and approvals. Use only the

described, regulated components specified in this guide. Use of other products /

components will void the UL listing and other regulatory approvals of the product and

will most likely result in noncompliance with product regulations in the region(s) in which

the product is sold.

System power on/off: The power button DOES NOT turn off the system AC power. To

remove power from system, you must unplug the AC power cord from the wall outlet.

Make sure the AC power cord is unplugged before you open the chassis, add, or remove

any components.

Hazardous conditions, devices and cables: Hazardous electrical conditions may be

present on power, telephone, and communication cables. Turn off the server and

disconnect the power cord, telecommunications systems, networks, and modems attached

to the server before opening it. Otherwise, personal injury or equipment damage can

result.

Electrostatic discharge (ESD) and ESD protection: ESD can damage disk drives,

boards, and other parts. We recommend that you perform all procedures in this chapter

only at an ESD workstation. If one is not available, provide some ESD protection by

wearing an antistatic wrist strap attached to chassis ground any unpainted metal surface on

your server when handling parts.

ESD and handling boards: Always handle boards carefully. They can be extremely

sensitive to ESD. Hold boards only by their edges. After removing a board from its

protective wrapper or from the server, place the board component side up on a grounded,

static free surface. Use a conductive foam pad if available but not the board wrapper. Do

not slide board over any surface.

Installing or removing jumpers: A jumper is a small plastic encased conductor that slips

over two jumper pins. Some jumpers have a small tab on top that you can grip with your

fingertips or with a pair of fine needle nosed pliers. If your jumpers do not have such a

tab, take care when using needle nosed pliers to remove or install a jumper; grip the

narrow sides of the jumper with the pliers, never the wide sides. Gripping the wide sides

can damage the contacts inside the jumper, causing intermittent problems with the

function controlled by that jumper. Take care to grip with, but not squeeze, the pliers or

other tool you use to remove a jumper, or you may bend or break the pins on the board.

Intel® Modular Server System MFSYS25 to Promise* VTrak E-Class Connection Guide v

Table of Contents

Safety Information ..................................................................................................... iii

Important Safety Instructions ................................................................................................ iii

Wichtige Sicherheitshinweise ............................................................................................... iii

Consignes de sécurité .......................................................................................................... iii

Instrucciones de seguridad importantes ............................................................................... iii

Warnings ............................................................................................................................... iv

Chapter : Connection Guide ...................................................................................... 1

Intel® Modular Server System MFSYS25 to Promise* VTrak Connection .............................1

Logical Drive and LUN Numbering Strategy ..................................................................2

Prerequisites ..................................................................................................................2

Task 1: Log into Modular Server Control .......................................................................2

Task 2: Enabling External Ports ....................................................................................4

Task 3: Attaching the Data Cables ................................................................................5

Task 4: Finding the VTrak’s IP Address ......................................................................12

Task 5: Logging into WebPAM PROe .........................................................................14

Task 6: Creating Logical Drives ...................................................................................15

Task 7: Associating LUNs and Initiators ......................................................................18

Task 8: Installing an OS on a Compute Module ..........................................................20

vi Intel® Modular Server System MFSYS25 to Promise* VTrak E-Class Connection Guide

Intel® Modular Server System MFSYS25 to Promise* VTrak E-Class Connection Guide vii

List of Figures

Figure 1. MSC Login Screen......................................................................................................3

Figure 2. MSC Dashboard Screen ............................................................................................. 3

Figure 3. MSC Chassis Back Screen ......................................................................................... 4

Figure 4. MSC Expansion Port Dialog Box ................................................................................ 4

Figure 5. SCM to VTrak Basic Connections............................................................................... 6

Figure 6. SCM to VTrak with JBOD expansion .......................................................................... 8

Figure 7. SCM to Cascaded VTraks......................................................................................... 10

Figure 8. SCM to Cascaded VTraks with JBOD Expansion..................................................... 12

Figure 9. VTrak Serial Connector............................................................................................. 13

Figure 10. WebPAM PROe Login Screen................................................................................ 15

Figure 11. Modular Server Compute Module ........................................................................... 21

viii Intel® Modular Server System MFSYS25 to Promise* VTrak E-Class Connection Guide

Intel® Modular Server System MFSYS25 to Promise* VTrak E-Class Connection Guide 1

Connection Guide

Intel® Modular Server System MFSYS25 to Promise* VTrak

Connection

This document contains the following topics and tasks:

•Logical Drive and LUN Numbering Strategy (page 2)

•Prerequisites (page 2)

•Task 1: Log into Modular Server Control (page 2)

•Task 2: Enabling External Ports (page 4)

•Task 3: Attaching the Data Cables (page 5)

•Task 4: Finding the VTrak’s IP Address (page 12)

•Task 5: Logging into WebPAM PROe (page 14)

•Task 6: Creating Logical Drives (page 15)

•Task 7: Associating LUNs and Initiators (page 18)

•Task 8: Installing an OS on a Compute Module (page 20)

This Guide describes how to connect an Intel® Modular Server System MFSYS25

(Modular Server) to a Promise* VTrak E610s or E310s subsystem (VTrak) to expand the

Modular Server’s data capacity. These instructions are limited to making the Modular

Server-to-VTrak connection and related settings.

For information about setting up your VTrak, see the printed VTrak Quick Start Guide or

the VTrak Product Manual on the software CD that came with your subsystem.

For information about setting up your Modular Server, see the Intel® Modular Server

System MFSYS25 Quick Start User’s Guide, the Intel® Modular Server System MFSYS25

User Guide, and other related documents.

IT managers want the ability to assign LUNs to individual servers. On the Modular

Server, you can do that easily in the Intel®Modular Server Control GUI. The GUI reports

the World Wide Number (WWN) of each Compute Module (blade server). The WWN is

used for the SAS initiator name, and you need the initiator name to associate a LUN with

a compute module. But the GUI was not designed to work with external storage devices

such as VTrak. As a result, you must manually associate a LUN on VTrak with a compute

module.

The tasks in this document enable you to identify the WWN of each compute module in

the Modular Server and associate a LUN with the compute module using Promise*

WebPAM PROe, the GUI that runs on VTrak.

2Intel® Modular Server System MFSYS25 to Promise* VTrak E-Class Connection Guide

Logical Drive and LUN Numbering Strategy

A suggested strategy is to create a logical drive for each compute module. Each logical

drive has its own LUN. The LUN is 0 so the compute module can boot from it.

This strategy is followed throughout this document. You are free to use a different strategy

that better meets your needs.

Prerequisites

The Modular Server-to-VTrak connection requires:

•Modular Server, set up and running with a network connection

•VTrak, set up and running with a network connection

•Networked PC workstation running a Microsoft Windows* OS, to access Modular

Server Control and WebPAM PROe

•One or two SAS cables with SFF-8088 Mini-SAS connectors at both ends. The cables

must be long enough to reach from your Modular Server to your VTrak.

•RJ11-to-DB9 serial data cable supplied with the VTrak. This cable is required to

verify the VTrak’s IP address.

Task 1: Log into Modular Server Control

1. On your PC workstation, open Microsoft Internet Explorer*.

2. In the Address field, type https:// followed by the IP address of your Modular Server,

then press Enter.

The Modular Server Control (MSC) login screen appears.

3. In the MSC login screen:

—Typeadmin in the Username field.

—Typeadmin in the Password field.

— Click the Log In button.

The Username and Password are case sensitive.

Compute Module Logical Drive LUN

Slot 1 LD1 LUN0

Slot 2 LD2 LUN0

Slot 3 LD3 LUN0

Slot 4 LD4 LUN0

Slot 5 LD5 LUN0

Slot 6 LD6 LUN0

Andere Handbücher für MFSYS25 - AXXPSU 1000W Power Supply Module

Inhaltsverzeichnis

Andere Intel Server Handbücher

Intel

Intel MFSYS25V2 Bedienungsanleitung

Intel

Intel IP Network server NSI2U Bedienungsanleitung

Intel

Intel SC5650BCDP Sicherheitsleitfaden

Intel

Intel R2000LH2 Bedienungsanleitung

Intel

Intel SR1625UR - Server System - 0 MB RAM Bedienungsanleitung

Intel

Intel MB440LX Benutzerhandbuch

Intel

Intel ISP1100 - Server Platform - 0 MB RAM Bedienungsanleitung

Intel

Intel SR1325TP1 - Entry Server Platform Bedienungsanleitung

Intel

Intel R1000WT Series Benutzerhandbuch

Intel

Intel ISP4400 - Server Platform - 0 MB RAM Bedienungsanleitung

Intel

Intel SR2600URLXNA Leitfaden

Intel

Intel R2000SC Bedienungsanleitung

Intel

Intel MFSYS25 - AXXPSU 1000W Power Supply Module Bedienungsanleitung

Intel

Intel SR2600UR - Server System - 0 MB RAM Bedienungsanleitung

Intel

Intel SR1520ML - Server System - 0 MB RAM Bedienungsanleitung

Intel

Intel R1000WF Series Kurzanleitung zur Einrichtung

Intel

Intel P4308CP4MHEN Bedienungsanleitung

Intel

Intel MFSYS25V2 Bedienungsanleitung

Intel

Intel S1200SP Bedienungsanleitung

Intel

Intel SR9000MK4U - Server System - 0 MB RAM Bedienungsanleitung

Intel

Intel R2000WF series Bedienungsanleitung

Intel

Intel SR1550AL - Server System - 0 MB RAM Bedienungsanleitung

Intel

Intel E80367-001 Betriebsanleitung

Intel

Intel AD450NX Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung