Johnson 40-6519 Bedienungsanleitung

Self-Leveling Rotary Laser

Model No. 40-6519

Instruction Manual

Congratulations on your choice of this Self-Leveling Rotary Laser. We

suggest you read this instruction manual thoroughly before using the

instrument. Save this instruction manual for future use.

This is a Class IIIa laser tool and is manufactured to comply with CRF 21,

parts 1040.10 and 1040.11 as well as international safety rule IEC 285.

1658i-English_Manuals 1/11/17 11:50 AM Page 1

Table of Contents

1. Kit Contents

2. Features and Functions

3. Safety Instructions

4. Location/Content of Warning

Labels

5. Location of

Parts/Components

6. Operating Instructions

7. Using the Product

8. Laser Placement

9. Application Demonstrations

10. Troubleshooting uide

11. Calibration

12. Technical Specifications

13. Care and Handling

14. Product Warranty

15. Warranty Registration

16. Accessories

1. Kit Contents

Description ty.

Self-Leveling Rotary Laser

“AA” Alkaline Batteries 6

Wall/Ceiling Mount 1

8' rade Rod 1

Elevating Tripod 1

Detector with 2 “AA” Alkaline Batteries 1

Tinted lasses 1

Target 1

Instruction Manual 1

Hard-Shell Carrying Case 1

1658i-English_Manuals 1/11/17 11:50 AM Page 2

2. Features and Functions

• Self-leveling with magnetically dampened compensation system.

• If laser is out of its self-leveling range, rotation stops and

alarm sounds.

• Projects (1) a horizontal laser plane and a vertical plumb beam

or (2) a vertical laser plane with a simultaneous 90° split beam.

• Laser rotation speed is 200rpm (Low), 400rpm (Medium),

600rpm (High).

• Illuminated vial for alignment in vertical plane.

• Water and dust resistant.

3. Safety Instructions

Please read and understand all of the following instructions, prior

to using this tool. Failure to do so, may void the warranty.

DANGER!

Class IIIa Laser Product

Max. Power Output: ≤5mW

Wavelength: 625-645nm

THIS TOOL EMITS LASER RADIATION.

DO NOT STARE INTO BEAM.

AVOID DIRECT EYE EXPOSURE.

1658i-English_Manuals 1/11/17 11:50 AM Page 3

ATTENTION IMPORTANT

• Read all instructions prior to operating this laser tool. Do not remove any labels from tool.

• Do not stare directly at the laser beam.

• Do not project the laser beam directly into the eyes of others.

• Do not set up laser tool at eye level or operate the tool near a reflective surface as

the laser beam could be projected into your eyes or into the eyes of others.

• Do not place the laser tool in a manner that may cause someone to unintentionally

look into the laser beam. Serious eye injury may result.

• Do not operate the tool in explosive environments, i.e. in the presence of gases or

flammable liquids.

• Keep the laser tool out of the reach of children and other untrained persons.

• Do not attempt to view the laser beam through optical tools such as telescopes as

serious eye injury may result.

• Always turn the laser tool off when not in use or left unattended for a period of time.

• Remove the batteries when storing the tool for an extended time (more than 3 months)

to avoid damage to the tool should the batteries deteriorate.

• Do not attempt to repair or disassemble the laser tool. If unqualified persons attempt

to repair this tool, warranty will be void.

• Use only original Johnson®parts and accessories purchased from your Johnson®

authorized dealer. Use of non-Johnson®parts and accessories will void warranty.

1658i-English_Manuals 1/11/17 11:50 AM Page 4

4. Location/Content of Warning Labels

1658i-English_Manuals 1/11/17 11:50 AM Page 5

5. Location of Part/Components

Line Laser Output Window

X-Calibration Hole Bolt

Y-Calibration Hole Bolt

Bubble Adjustment

Bolt

Keypad

Rotating Laser

Output Window

Hand rips

Vial

Battery Cover Screw

Battery Cover

5/8" - 11 Screw Thread

Leveling Base

Connecting Bar

Adjustment Knob

Receiver

Lock Knob -

Compensator/Transportation

Charging LED Indicator

DC 6V Outlet

(6V Charger not included)

1658i-English_Manuals 1/11/17 11:50 AM Page 6

Keypad

Leveling Base

5/8" - 11 Screw Thread

Adjustment Knob

Release Lever

Rotating Speed

Switch Button Medium Speed LED

High Speed LED

Low Speed LED

Power LED

Power Button

Hanging Holes

1658i-English_Manuals 1/11/17 11:50 AM Page 7

6. Operating Instructions

IMPORTANT: It is the responsibility of the user to verify the

calibration of the instrument before each use.

Battery Installation

Note: Always check that the compensator lock knob is in the “Off”

position before removing and/or replacing batteries.

1. Unscrew the battery cover screw in a

clockwise direction to open the battery

cover.

2. Insert six “AA” alkaline batteries into

the battery compartment according to

the polarity illustrated inside.

3. Close the battery cover.

4. Screw in the battery cover screw in a counter-clockwise direction

to lock the battery cover.

1658i-English_Manuals 1/11/17 11:50 AM Page 8

7. Using the Product

Power On/Off the Laser

Press the button to power on/off the laser. The rotating speed

will be set to high.

Power LED: Lighted LED indicates power is on.

Extinguished LED indicates power is off.

Flashing LED indicates low batteries – if flashing,

please change the batteries.

Change Rotating Speed

Press the button to change the rotating speed from high (600

rpm), to medium (400 rpm) and to low (200 rpm). When changing

the rotating speed, the corresponding LED will illuminate.

Notes:

• When starting the unit, the laser will be in high-speed mode.

• Low speed is recommended for indoor use to give the best

beam visibility.

• High speed is recommended when used with a detector.

1658i-English_Manuals 1/11/17 11:50 AM Page 9

Manual vs. Self-leveling Operation

1. Turn the lock knob counter-clockwise to the “Off” position to lock

the compensator. The laser will be operating in manual mode and

will not be self-leveling.

2. Turn the lock knob clockwise to the “On” position to unlock the

compensator and allow the laser to self-level.

3. Place the laser on a relatively smooth, flat and level surface.

4. Set the lock knob to the “On” position.

5. Press the button to power on the laser.

6. Laser must be within ±3º of level for the self-leveling feature to

function properly. If the laser is tilted to exceed its self-leveling

range, it will stop rotating and will sound an intermittent beeping

sound.

Leveling the Laser for use in Vertical Mode

(Bubble Level Adjustment)

1. Turn the lock knob counter-clockwise to the

“Off” position to lock the compensator. The

laser will be operating in manual mode and will

not be self-leveling.

1658i-English_Manuals 1/11/17 11:50 AM Page 10

Inhaltsverzeichnis

Andere Johnson Messgerät Handbücher

Johnson

Johnson 40-6705 Bedienungsanleitung

Johnson

Johnson 1456-0000 Bedienungsanleitung

Johnson

Johnson 40-6690 Bedienungsanleitung

Johnson

Johnson 40-6688 Bedienungsanleitung

Johnson

Johnson LDM150 Bedienungsanleitung

Johnson

Johnson 1454-0000 Bedienungsanleitung

Johnson

Johnson 1889-0600 Bedienungsanleitung

Johnson

Johnson 40-6582 Bedienungsanleitung

Johnson

Johnson 40-6526 Bedienungsanleitung

Johnson

Johnson 40-6515 Bedienungsanleitung

Johnson

Johnson 1888-1900 Bedienungsanleitung

Johnson

Johnson LEVEL UP 40-6535 Bedienungsanleitung

Johnson

Johnson 40-6624 Bedienungsanleitung

Johnson

Johnson 40-6502 Bedienungsanleitung

Johnson

Johnson 40-6700 Bedienungsanleitung

Johnson

Johnson 40-6932 Bedienungs- und Wartungsanleitung

Johnson

Johnson 1888-1100 Bedienungsanleitung

Johnson

Johnson 40-6648 Bedienungsanleitung

Johnson

Johnson 40-6543 Bedienungsanleitung

Johnson

Johnson 40-6557 Bedienungsanleitung

Johnson

Johnson 40-6625 Bedienungsanleitung

Johnson

Johnson 40-6590 Bedienungsanleitung

Johnson

Johnson JLX 40-6590 Bedienungsanleitung

Johnson

Johnson 40-6064 Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

ELMETRON

ELMETRON CP-511 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

EXFO

EXFO FTB-2 Bedienungs- und Wartungshandbuch

Keysight

Keysight M8290A Bedienungsanleitung

ADTEK

ADTEK MW-5 Bedienungsanleitung