Johnson 40-6582 Bedienungsanleitung
©2012 Johnson Level & Tool 1
Electro ic Self-Leveli g Dual Grade
Horizo tal / Vertical Rotary Laser
Model No. 40-6582
Instruction Manual
Congratulations on your choice of this Electronic Self-Leveling Dual Gra e
Horizontal / Vertical Rotary Laser. We suggest you rea this instruction
manual thoroughly before using the instrument. Save this instruction manual
for future use.
This tool emits one rotating laser beam plus one plumb beam and is ideal for
laying out indoor or outdoor construction projects.
This is a Class IIIa laser tool and is manufactured to comply with C R 21, parts
1040.10 and 1040.11 as well as international safety rule IEC 285.
6274H-1-All_Manual 9/26/12 10:55 AM Page 1
2©2012 Johnson Level & Tool
Table of Contents
1. Kit Contents
2. eatures and unctions
3. Safety Instructions
4. Location/Content
of Warning Labels
5. Location of Parts/Components
6. Operating Instructions
7. Using the Product
8. Self-Check & ine Calibration
9. Technical Specifications
10. Application Demonstrations
11. Care and Handling
12. Product Warranty
13. Warranty Registration
14. Accessories
1. Kit Contents
Description Model No. 40-6582 Qty.
Electronic Self-Leveling Dual Grade Horizontal/Vertical Rotary Laser 1
Li-ion Rechargeable Battery Pack 1
Battery Adapter 1
Detector with 9V Battery and Clamp 1
Remote with 2 AA Batteries 1
Alkaline Battery Compartment (batteries not included) 1
Vertical Bracket 1
ine Adjusting Plate 1
Sighting Scope 1
Instruction Manual with Warranty Card 1
Hard-Shell Carrying Case 1
6274H-1-All_Manual 9/26/12 10:55 AM Page 2
©2012 Johnson Level & Tool 3
2. Features and Functions
• Large electronic self-level range: When beyond the ±8°
leveling range, the laser beam will flash, laser stops rotating
and an audible alarm activates.
• Vertical and horizontal working modes: Electronic self-leveling
in both horizontal and vertical mode with one rotating laser
beam and one 90° split beam.
• Three rotational speeds: 300, 600 and 1100 RPM
• Scan function adjusts the scan line size and scan direction.
• Out-of-level alarm ensures the working accuracy.
• ine self-calibration function.
• In “Tilt Mode” the laser will stop rotating and flash when
bumped to ensure work accuracy.
• Programmable dual slope function allows the user to perform
slope in both X & Y axis.
• Dust and rain resistant.
6274H-1-All_Manual 9/26/12 10:55 AM Page 3
4©2012 Johnson Level & Tool
3. Safety Instructions
Please read and understand all of the following instructions, prior
to using this tool. ailure to do so, may void the warranty.
DANGER!
Class IIIa Laser Product
Max. Power Output: ≤5mW
Wavelength: 625-645nm
THIS T L EMITS LASER RADIATI N.
D N T STARE INT BEAM.
AV ID DIRECT EYE EXP SURE.
ATTENTION IMPORTANT
• Read all instructions prior to operating this laser tool. Do not remove any labels from tool.
• Do not stare directly at the laser beam.
• Do not project the laser beam directly into the eyes of others.
• Do not set up laser tool at eye level or operate the tool near a reflective surface as
the laser beam could be projected into your eyes or into the eyes of others.
• Do not place the laser tool in a manner that may cause someone to unintentionally
look into the laser beam. Serious eye injury may result.
• Do not operate the tool in explosive environments, i.e. in the presence of gases or
flammable liquids.
• Keep the laser tool out of the reach of children and other untrained persons.
• Do not attempt to view the laser beam through optical tools such as telescopes as
serious eye injury may result.
• Always turn the laser tool off when not in use or left unattended for a period of time.
• Remove the batteries when storing the tool for an extended time (more than 3 months)
to avoid damage to the tool should the batteries deteriorate.
• Do not attempt to repair or disassemble the laser tool. If unqualified persons attempt
to repair this tool, warranty will be void.
• Use only original Johnson®parts and accessories purchased from your Johnson®
authorized dealer. Use of non-Johnson®parts and accessories will void warranty.
6274H-1-All_Manual 9/26/12 10:55 AM Page 4
©2012 Johnson Level & Tool 5
4. Location/Content of Warning Labels
6274H-1-All_Manual 9/26/12 10:55 AM Page 5
6©2012 Johnson Level & Tool
5. Location of Part/Components
Sighting Scope
Laser Output Window
Rotating Head
LCD Display Keypad
Charging Port
Battery Cover Screw
Circular Vial
Leveling Knobs
ine Adjustment
Knobs
Lock Knob
5/8” x 11 Screw
Thread
Battery
Cover
5/8” x 11
Screw
Thread
5/8” x 11 Screw
Thread
Handle
Vertical Bracket
Fine Adjusting Plate
6274H-1-All_Manual 9/26/12 10:55 AM Page 6
©2012 Johnson Level & Tool 7
6. perating Instructions
IMP RTANT: It is the responsibility of the user to verify the
calibration of the instrument before each use.
Alkaline Battery Installation:
Put 3 “D” alkaline batteries (not included)
into the battery pack according to the polarity
direction, then insert the battery pack into the
laser. (Note: Batteries facing up.)
Rechargeable Battery Pack Installation:
Install the rechargeable battery pack into
the laser.
Charging the Rechargeable Battery Pack:
Charge the rechargeable battery pack by inserting the charger into
the charging port. The LED on the charger is red during the charging
process; the LED on the charger will turn green when the battery is
fully charged.
Charging LED
Charger
Charge the rechargeable battery pack
outside the laser
Charge the rechargeable battery pack with
battery pack inside the laser
6274H-1-All_Manual 9/26/12 10:55 AM Page 7
8©2012 Johnson Level & Tool
Note:
(1) Charge the rechargeable battery when the battery power is
low (battery symbol on the LCD is flashing). This will extend
the battery life.
(2) If the laser is not going to be used for a long period of time,
charge the rechargeable battery every 2-3 months.
Use of the Vertical Bracket and Fine Adjusting Plate:
Screw the vertical bracket onto the side of
the laser with the vertical bracket leveling
knobs at the bottom of the laser and the
circular vial at the top of the laser.
or exact positioning of the X or
Y-axis, screw the ine Adjusting
Plate on the tripod and then screw
the laser to the ine Adjusting Plate.
Using the Sighting Scope, rotate
the laser to the exact position required. Use the ine Adjusting
Knobs for fine movement. Use the Lock Knob when positioned in
the correct position.
Vertical Bracket
ine Adjusting Plate
6274H-1-All_Manual 9/26/12 10:55 AM Page 8
©2012 Johnson Level & Tool 9
7. Using the Product
Keypad Controls
LCD Display
Rotating Speed Button On/Off Button Grade Axis and
Position Button
Grade Value Buttons
Manual Mode Button
Remote Channel Button
Vibrate/VWS Button
Tilt Button
Scan / Dot Button
Rotating Speed
X-Axis Grade Value
Y-Axis Grade Value
Battery Capacity
Remote Channel
Remote On/Off
Manual Mode
Vibrate VWS Mode
Tilt Mode
Level Button /
LCD Backlight Button
Scan / Dot Clockwise
Button Scan / Dot
Counterclockwise Button
6274H-1-All_Manual 9/26/12 10:55 AM Page 9
10 ©2012 Johnson Level & Tool
Power n/ ff Button:
Press this button to power on/off the laser.
The laser is in self-leveling status when powered on.
Default rotate speed is 600 RPM
Default grade for X-axis and Y-axis is 0.
The remote channel will display CH1.
If there is a matched remote control which is on, the remote
status will display . If there is not a matched remote, it will
display .
When powered on, the laser will automatically check the battery
capacity.
When powering on the laser it will enter into the self-leveling mode.
The TILT display will blink for thirty seconds after the laser starts
to rotate. During these thirty seconds, if the laser is moved, it will
stop rotating and re-level itself. After thirty seconds, the laser
will enter into the TILT mode and the LCD will show a solid
TILT display. (See TILT button)
Grade axis and Grade Value Button:
With the laser on, press the Grade Axis and Position button and hold
for two seconds. The laser will beep once and the laser will enter the
X-axis grade setting mode. The X-axis symbol “X” and axis direction
symbol (+) will flash. A short press of the button will move the
position to the next symbol. Pressing the Grade Value Buttons
will change the values. When the X-axis setting is completed, press
the grade axis button for two seconds to enter the Y-axis grade
6274H-1-All_Manual 9/26/12 10:55 AM Page 10
Inhaltsverzeichnis
Sprachen:
Andere Johnson Messgerät Handbücher
Johnson
Johnson 1888-1100 Bedienungsanleitung
Johnson
Johnson 40-6535 Bedienungsanleitung
Johnson
Johnson 40-6526 Bedienungsanleitung
Johnson
Johnson 40-6543 Bedienungsanleitung
Johnson
Johnson 40-6515 Bedienungsanleitung
Johnson
Johnson LDM85 Bedienungsanleitung
Johnson
Johnson 1454-0000 Bedienungsanleitung
Johnson
Johnson 40-6526 Bedienungsanleitung
Johnson
Johnson LDM100 Bedienungsanleitung
Johnson
Johnson 40-6519 Bedienungsanleitung
Johnson
Johnson LDM150 Bedienungsanleitung
Johnson
Johnson 40-6618 Bedienungsanleitung
Johnson
Johnson 1886-0000 Bedienungsanleitung
Johnson
Johnson 40-6590 Bedienungsanleitung
Johnson
Johnson 40-6700 Bedienungsanleitung
Johnson
Johnson 40-6690 Bedienungsanleitung
Johnson
Johnson 40-6064 Bedienungsanleitung
Johnson
Johnson LDM150 Bedienungsanleitung
Johnson
Johnson JLX 40-6590 Bedienungsanleitung
Johnson
Johnson 40-6705 Bedienungsanleitung
