Johnson 40-6535 Bedienungsanleitung

Electronic Self-Leveling Horizontal

Rotary Laser

Model No. 40-6535

Instruction Manual

Congratu ations on your choice of this E ectronic Se f-Leve ing

Horizonta Rotary Laser. We suggest you read this instruction manua

thorough y before using the instrument. Save this instruction manua

for future use.

This is a Class IIIa laser tool and is manufactured to comply with CFR 21,

parts 1040.10 and 1040.11 as well as international safety rule IEC 285.

5680H-English_Manuals 5/4/12 8:52 AM Page 1

Table of Contents

1. it Contents

2. Features and Functions

3. Safety Instructions

4. Location/Content

of Warning Labels

5. Location of Parts/Components

6. Operating Instructions

7. Using the Product

8. Self-Check & Fine Calibration

9. Technical Specifications

10. Application Demonstrations

11. Care and Handling

12. Product Warranty

13. Warranty Registration

14. Accessories

1. Kit Contents

Description for Model 40-6535 Qty.

Electronic Self-Leveling Horizontal Rotary Laser

NiMH Rechargeable Battery Pack 2

6V Battery Adapter 1

Remote Control with 9V Battery 1

Detector with 9V Battery 1

Instruction Manual with Warranty Card 1

Hard-Shell Carrying Case 1

2. Features and Functions

• Large ±5° electronic auto-level range. When beyond the leveling

range, the laser line will flash, rotation of the beam will stop, and an

audible alarm will activate.

• Slope operation function allows user to perform slope 8º in both

x and y axis.

• Height of Instrument/TILT alarm function ensures product accuracy.

• Projects a laser horizontal plane.

• Dust and rain resistant.

• Remote power off function.

• Included detector and remote control for more convenient operation.

5680H-English_Manuals 5/4/12 8:52 AM Page 2

3. Safety Instructions

Please read and understand all of the following instructions, prior

to using this tool. Failure to do so, may void the warranty.

DANGER!

Class IIIa Laser Product

Max. Power Output: ≤5mW

Wavelength: 625-645nm

THIS T L EMITS LASER RADIATI N.

D N T STARE INT BEAM.

AV ID DIRECT EYE EXP SURE.

ATTENTION IMPORTANT

• Read all instructions prior to operating this laser tool. Do not remove any labels from tool.

• Do not stare directly at the laser beam.

• Do not project the laser beam directly into the eyes of others.

• Do not set up laser tool at eye level or operate the tool near a reflective surface as

the laser beam could be projected into your eyes or into the eyes of others.

• Do not place the laser tool in a manner that may cause someone to unintentionally

look into the laser beam. Serious eye injury may result.

• Do not operate the tool in explosive environments, i.e. in the presence of gases or

flammable liquids.

• eep the laser tool out of the reach of children and other untrained persons.

• Do not attempt to view the laser beam through optical tools such as telescopes as

serious eye injury may result.

• Always turn the laser tool off when not in use or left unattended for a period of time.

• Remove the batteries when storing the tool for an extended time (more than 3 months)

to avoid damage to the tool should the batteries deteriorate.

• Do not attempt to repair or disassemble the laser tool. If unqualified persons attempt

to repair this tool, warranty will be void.

• Use only original Johnson®parts and accessories purchased from your Johnson®

authorized dealer. Use of non-Johnson®parts and accessories will void warranty.

5680H-English_Manuals 5/4/12 8:52 AM Page 3

4. Location/Content of Warning Labels

5680H-English_Manuals 5/4/12 8:52 AM Page 4

5. Location of Part/Components

Rotating laser emitting window

Handle

eypad

DC 6V

Battery Cover

5680H-English_Manuals 5/4/12 8:52 AM Page 5

6. perating Instructions

IMP RTANT: It is the responsibility of the user to verify the

calibration of the instrument before each use.

Battery Installation

Note: Always check to be sure that the on/off switch is in the off

position before removing and replacing batteries.

Ni-MH R charg abl Batt ry Pack Installation

1. Unscrew the battery cover bolt and

remove the battery cover.

2. Put 2 rechargeable battery packs into the

battery case and then insert the plug of

the battery pack lead-wire into the socket at the battery case.

3. Screw the battery cover bolt back on.

Ni-MH R charg abl Batt ry Charging

Using the battery adapter (included), charge the rechargeable battery

pack through the outlet jack. When the charge indicator lamp turns

from red to green (after approximately five hours), the Ni-MH

rechargeable battery pack has been fully charged.

Note:

(1) For the first two charges of new rechargeable batteries, it is

necessary to charge for 12 plus hours.

(2) The unit can still work during charging with the adapter.

(3) Do not charge alkaline batteries to avoid explosion.

(4) Used (discharged) batteries are hazardous waste and should be

disposed of properly.

5680H-English_Manuals 5/4/12 8:52 AM Page 6

Before Using the Laser

When you charge the new battery or one which has not been used for

long periods of time, it may not reach full charge until after you have

discharged it fully in use and recharge it several times.

Instrument Usage

1. Put in Ni-MH rechargeable battery pack, or 4 “C” alkaline batteries (not

included), or connect with the 6V DC power through the power jack.

2. Place the instrument on a tripod, connect it to the tripod using the

5/8” screw thread at the bottom of the instrument.

Note: If the instrument is inclined beyond the self-leveling range, the

instrument will deliver an audible alarm. You will need to

re-position the instrument.

3. Press power switch to turn power on. Press buttons on remote control to

adjust for slope feature.

4. Press H.I. button to lock in the height of the instrument.

5. After finishing operation or before moving the instrument, turn the

power off.

Alkalin Batt ry Installation

1. Unscrew the battery cover bolt and remove the battery cover.

2. Put in 4 “C” alkaline batteries (not included) according to the

illustrated polarity direction.

3. Screw the battery cover bolt and battery cover back on the unit.

5680H-English_Manuals 5/4/12 8:52 AM Page 7

7. Using the Product

perating Panel

Power n/ ff

1. Press the power button to power on. The

power indicator lamp will light up and then the

instrument will automatically level itself, with

rotation occurring once the unit is level.

2. Press the power button again to power off.

Low Battery Indication

If the battery indicator lamp is lit, this means low

battery voltage. To ensure normal operation, replace

batteries or charge the rechargeable Ni-MH battery pack.

Alarm If Beyond Range

If the instrument is inclined beyond the self-leveling

range of ±5° , it will deliver an audible alarm, and

the power indicator lamp will blink. You will need

to re-position the instrument until it is within the

leveling range.

Instrument Panel Remote Control Panel

5680H-English_Manuals 5/4/12 8:52 AM Page 8

Height of Instrument (H.I.) - TILT

1. After powering on the instrument and entering into

auto-level status, press the tilt button. When the

indicator is on (see figure), the instrument enters

into TILT mode. If the leveled instrument is moved

or bumped, the head will stop rotation and the TILT indicator light and

laser beam will flash instead of the unit performing the auto-level

function. Press the tilt button on the panel or remote to quit the tilt

mode and enter into auto-level status.

2. Press the tilt button on the laser or remote again to enter the tilt mode.

Slope Adjusting Function (SL PE)

This function must be operated by the remote control (see operating

panel shown in fig.1).

1. S l ct slop adjusting dir ction

The first press of X/Y button will illuminate the X indicator light (fig. 2).

The second press of X/Y button will illuminate the Y indicator light (fig.

3). The third press of the X/Y button will quit the slope-adjusting func-

tion and enter the unit into auto-level status.

2. Adjust th slop angl

When in either the x-axis or y-axis, press either of the two

up/down arrow keys on remote

control (fig.1) to adjust slope

angle.

Note: A single press of either key

activates fine tuning while a

continuous pressing activates

quick adjustment.

5680H-English_Manuals 5/4/12 8:52 AM Page 9

Adjust the inclination extent of the slope

Pressing the up/down arrow keys on the remote control, will adjust the

inclination of the instrument slope. A single press will cause a slight

adjustment and a continuous press will cause a quick adjustment.

If laser is taken past its slope range (±8º), the laser will deliver an

audible alarm and the laser beam will flash and stop rotating.

Sleep Mode

1. The first press of the

POWER button on the

remote control (fig.4) will

make the instrument enter

sleep mode. The power

indicator lamp on the

panel is lit (fig.5), the laser beam goes out, and the instrument

head stops rotation.

2. The second press of the POWER button on the remote control will

make the instrument quit sleep mode and enter auto-level status.

Timed Power-off Function

Power instrument on and press the power key on the remote control,

the instrument will enter the sleep mode. Under the sleep mode, if

there is no operation for 30 minutes, the instrument will power off

automatically. Under sleep mode, press the power key on the

remote control to make the instrument start.

5680H-English_Manuals 5/4/12 8:52 AM Page 10

Andere Handbücher für 40-6535

Inhaltsverzeichnis

Andere Johnson Messgerät Handbücher

Johnson

Johnson 1888-1900 Bedienungsanleitung

Johnson

Johnson 1888-0700 Bedienungsanleitung

Johnson

Johnson 40-6527 Bedienungsanleitung

Johnson

Johnson 40-6690 Bedienungsanleitung

Johnson

Johnson LDM195 Bedienungsanleitung

Johnson

Johnson 40-6648 Bedienungsanleitung

Johnson

Johnson 1456-0000 Bedienungsanleitung

Johnson

Johnson JLX 40-6590 Bedienungsanleitung

Johnson

Johnson 40-6001 Bedienungsanleitung

Johnson

Johnson 40-6557 Bedienungsanleitung

Johnson

Johnson 1888-1100 Bedienungsanleitung

Johnson

Johnson 1454-0000 Bedienungsanleitung

Johnson

Johnson JRT300-RDHV-S Bedienungsanleitung

Johnson

Johnson LDM100 Bedienungsanleitung

Johnson

Johnson 40-6519 Bedienungsanleitung

Johnson

Johnson 40-6705 Bedienungsanleitung

Johnson

Johnson 40-6582 Bedienungsanleitung

Johnson

Johnson 40-6502 Bedienungsanleitung

Johnson

Johnson LDM150 Bedienungsanleitung

Johnson

Johnson 40-6618 Bedienungsanleitung

Johnson

Johnson 40-6064 Bedienungsanleitung

Johnson

Johnson 1886-0000 Bedienungsanleitung

Johnson

Johnson 40-6700 Bedienungsanleitung

Johnson

Johnson 40-6625 Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

ELMETRON

ELMETRON CP-511 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

EXFO

EXFO FTB-2 Bedienungs- und Wartungshandbuch

Keysight

Keysight M8290A Bedienungsanleitung

ADTEK

ADTEK MW-5 Bedienungsanleitung