Kaba E-Flash 680 Bedienungsanleitung
Please read these instructions carefully before you use the product.
Functions and design of this product are subject to change without prior
notice due to product improvement.
USER’S GUIDE
E-Flash 680
Please read the following before using KABA E-FLASH680 products.
Product features
● Card keys enclosed allow you to open a door easily. You can register up to 100 cards.
● A door can be opened easily with a PIN code.
● The anti-panic function enables you to open a door easily by turning the handle downward from inside.
● If an incorrect PIN code or card key is used for more than 3 times, system will be suspended for about 15 minutes to block
the trespass of an outsider.
● The voice guide function can help users to operate and set functions with ease and convenience.
● This product is designed and manufactured to assure personal safety. Improper use can result in personal damage or
properly loss. Please observe the procedures for installation, use and surviving.
● KABA EF680 are precision electronic devices. All safety and operating instructions should be read.
● This product was initially designed for weather protected outdoor areas, however it has been tested for external use.
● Refer all servicing to qualified service personnel. Servicing is required when the product has been damaged or requires
installation or re-installation.
● The product warranty does not cover defects, or damages arising from the door defects, improper installation, lack of or
improper maintenance, improper storage, shipping and handling, ordinary wear and tear, misuse, abuse, accident,
unauthorized service, or use with unauthorized service parts.
● Disassembly, rework and reverse engineering are prohibited without a written approval of KABA except for normal
installation of the product.
● The trademarks, trade names, designs, copyright, patents and other proprietary right used on or embodied in the product
and this manual shall remain the exclusive property of the manufacturer, cannot be copied or used in any form unless
otherwise authorized in writing by KABA
● The information in this manual is subject to change without notice.
1
Components
How to Use
Name of Parts
2-1.Outside Lock (Front Body)
2-2.Inside Lock (Main Body)
3-1.Factory Reset
3-2.Reset Admin PIN Code
3-3.Delete All User Information
3-4.How to Enter the Menu
3-5.Instruction Overview
3-6.Card Key Registration
3-7.Delete an Individual Card Key
3-8.Delete All Card Keys
3-9.PIN Code Registration
3-10.Delete an Individual PIN Code
3-11.Delete All PIN Codes
3-12.Remote Control Registration
3-13.Remote Control Deletion
3-14.Sound Volume Setting
3-15.Open a Door From Outside
3-16.Open a Door From Inside
3-17.Lock a Door From Inside
3-18.Lock a Door From Outside
3-19.Turn on Wireless Communication
3-20.Turn off Wireless Communication
3-21.Language Setting
3-22.Passage Mode Setting
3-23.Inside Compulsory Lock (Privacy) Mode Setting
3-24.Trespassing/Damage Alarm
3-25.Keypad Lockout Alarm
3-26.Auto Deadbolt Alarm
3-27.Low Battery Alarm
6
9
10
10
11
12
13
14
14
15
16
16
17
18
18
19
20
20
21
22
22
23
23
23
24
25
25
25
Table of Contents
2
Trouble Shooting
4-1.How to Replace a Battery
4-2.Solutions to Malfunction of the Product
4-3.Trouble Shooting
Product Specification
7
8
26
27
28
30
Safety Regulations
To ensure your own safety and prevent any damage or accident caused by the inappropriate use
of the product, please read carefully before you start to use the product. Children should be
under the guidance of an adult to ensure the safety use of the product. Keep this manual in a
safe place for future reference.
Information which a user should
observe to prevent any injury,
damage or property loss.
Supplementary information on the
product.
Caution
Guideline that a user should follow.
Something must not be done.
Ban
Note
Must
Installation
Consult a qualified
installation professional for
installation or relocation.
Ban
Ensure that the gap between
the door and the doorframe is
less than 5mm. (If the gap is
too wide, auto lock function
may not be able to function)
Must Must
Do not install the product where
direct contact with rainwater is
possible. The rainwater may
cause the malfunction of the
product.
3
Installation
Do not wash the product with
water as electronic circuit may
break down in contact with water.
Wipe it with a dry cloth for
cleaning.
Ban Ban
Must Must Must
Do not press a button too
hard or use a foreign object
to hit it. This may cause the
damage or malfunction of the
product.
It is your own responsibility to
check if the door is properly
locked when you are going
out. We are not responsible for
any damage or property loss.
Do not disassemble, reassemble or
repair the product by yourselves.
This may cause the damage or
malfunction of the product. Ban
Be alert when you open a door
with a password. There will be a
risk of theft if your password is
exposed to an outsider. Change
your password on a regular basis.
Beware of the door handle
to prevent possible injury.
Caution your child at home.
4
M
E
M
E
N. B for Installation
Do not wear gloves
to touch the keypad
as the system
cannot detect.
Keep the keypad clean
and away from foreign
substance at all times
and do not touch it with
your wet finger.
Use a new alkaline battery
(AA size). Otherwise, it
may cause the malfunction
of the product and the
lifetime of the product may
be shortened.
Do not clean the product
with direct contact with
water, or wipe it with
chemicals such as benzene,
thinner, alcohol, etc. They
may cause damage or
malfunction of the product.
Insert the battery properly
with the correct polarity. If
the battery is incorrectly
inserted, this may cause
battery leakage or rupture
and lead to the malfunction
of the product. The lifetime
of the product will be
shortened.
Do not drop a remote
control or give it a
shock to prevent
damage or malfunction.
Must Must Must Must
Must Must Must Must
Do not mix a new
battery with a used
one. This can cause
damage and shorten
the lifetime of the
product.
When the battery
change alert is heard,
please replace the
battery as soon as
possible.
5
° К Ц Р П
0
10
20
30
40
50
60
70
80
90
100
10
20
30
40
50
60
70
80
90
100
120
130
140
150
160
170
110
ЈSCALEЈ1Ј1Ј
ЈUNITSЈmmЈ
Г
±
180
ГЛ°Ч ЦРП
40
?25
?10
?10
20
50
?10
R6
Outside part (front body) inside part (main body)
user manual
battery(AA) (4 nos)
guide screw card key (4 nos) manual key (3 nos) working drawing
Product components are
subject to change according
to installation environment
Note
screw (4 nos)
mortise
remote control
battery(AAA) (2 nos)
screw (3nos)
Strike Strike Box(2nos)
screw (4nos)
Spindle
Components
Basic Components (EF680)
Option
6
Keypad
Card Reader
Identifies a card key.
For you to enter a
number such as a PIN
code, user ID and menu
selection, it also
displays the user ID.
8
Name of Parts
Outside Lock (front body)
Battery Change Light
Red light is on when
battery needs to be
replaced.
Motion Light
Indicates the status of
a door lock.
Handle
Emergency Power Supply Socket
When the battery is fully discharged, a 9V
battery can be used to supply power to operate
the product temporarily as an emergency
backup. 9V battery is not included in the
Separate purchase
7
M
E
Management Button [M]
Passage Mode Switch
Privacy Mode Switch
Privacy Mode Light
Clear Button [E]
Battery Cover
Handle
Reset a admin PIN code and factory default.
Slide the [Passage Mode] switch to left to set the passage
mode or slide the switch to right to set the lock mode.
When you slide the [Privacy Mode] switch to the right and
press the switch, it can either set or clear the privacy mode.
Displays the status of the Privacy Mode.
Delete all information (except admin PIN
code) and reset factory default.
9
Inside Lock (Main Body)
Mortise
Installed on the side of a door for opening
and closing a door
8
Open the battery cover. Remove one piece
of battery
Input 8-digit admin PIN
code and press “#” button
Please to touch the
keypad to make sure
the lock has been
powered off.
The system will be restart after factory reset
All PIN codes and card keys will be deleted after
factory reset. Admin PIN code will reset to 00123456.
Default admin PIN code
is 00123456
Voice guide：
“Please Input PIN Code”
3-1
M
M
E
E
M
E
10
How to Use
Factory Reset
Press [M] and [E] button and
put back the battery
simultaneously.Voice guide
Caution
Note
Note
Note
9
Inhaltsverzeichnis
Andere Kaba Türschloss Handbücher
Kaba
Kaba 5 00 Series Bedienungsanleitung
Kaba
Kaba SIMPLEX 900 Series Bedienungsanleitung
Kaba
Kaba 7102 series Bedienungsanleitung
Kaba
Kaba SIMPLEX 5000 CYLINDRICAL Bedienungsanleitung
Kaba
Kaba E30 Bedienungsanleitung
Kaba
Kaba E-PLEX 5X51 Bedienungsanleitung
Kaba
Kaba E-PLEX 3x65 Deadlatch/Exit Mortise Bedienungsanleitung
Kaba
Kaba Confidant RFID Kit 2 Bedienungsanleitung
Kaba
Kaba Simplex LP1000 Series Bedienungsanleitung
Kaba
Kaba Digital Cylinder Bedienungsanleitung
Kaba
Kaba Solitaire 710-II Series Bedienungsanleitung
Kaba
Kaba E-PLEX 5x70 Series Bedienungsanleitung
Kaba
Kaba Saflok MT RFID Bedienungsanleitung
Kaba
Kaba C-lever Bedienungsanleitung
Kaba
Kaba E-Plex 5900 Bedienungsanleitung
Kaba
Kaba Simplex LP1000 Series Bedienungsanleitung
Kaba
Kaba E-PLEX 2000 Bedienungsanleitung
Kaba
Kaba C-lever compact Bedienungsanleitung
Kaba
Kaba c-lever acc. EN1906 Cl.1 Bedienungsanleitung
Kaba
Kaba Solitaire 710-II Series Bedienungsanleitung
