Kaba E-PLEX 5x70 Series Bedienungsanleitung

E-PLEX® 5x70 Series

Stand-Alone Access Controller

Installation Instructions

Table of Contents

STEP.................................................................................................................................PAGE

Tools Required ....................................................................................................................... 2

A-1. Wall Installation ...........................................................................................................4

A-2. Gang Box Installation ................................................................................................ 5

B. System Components ................................................................................................. 6

C. Component Wiring Connections ............................................................................ 6

D. Tamper and Security Features ................................................................................ 11

E. Software Setting.........................................................................................................12

F. Hard Reset Procedure...............................................................................................12

Template .................................................................................................. Center of Booklet

Warranty Card ....................................................................................... Center of Booklet

WARNING: The Master Code of this unit has been factory preset: 1, 2, 3,

4, 5, 6, 7, 8. To activate lock functions, the master combination must be

changed at time of installation.

Warning and Cautions

IMPORTANT: Carefully inspect windows, doorframes, door,

lights, etc. to ensure that the recommended procedures will not

cause any damage. Kaba Access Control's warranty does not

cover damages caused by installation.

For technical assistance please call

1.800.849.TECH (8324) or 336.725.1331

TOOLS REQUIRED

• Electric Drill/Screwdriver with Variable Speed and Torque

• Various Flat and Phillips Bits for Power Driver

• Wire Cutter/Stripper

• Small Straight (Flat Head) Manual Screwdriver

• Wall Anchors with #10 and or #6 Flat Head Screws or

Masonry Screws

• Masonry or Wood Drill Bits for Various Surfaces

CAUTION: Wear safety glasses during installation.

ACU

PIU

SK3193 Sh2 of 2

01Aug08 jre, for Shellberg

03Mar10 jre show Rev 2 board

05Apr10 jre show Yellow Purple

Power Interface Unit, Standalone Access Control

TEMPLATESHIM BACKPLATE

& GASKET

OUTSIDE HOUSING

WITH KEYPAD

SECURITY

SCREWS

A-1. WALL INSTALLATION

A-1.1 Please place the template (located in the middle of this

manual) on mounting surface to ensure that there are no

obstructions; this allows the keypad housing to be moved up,

then in and down onto the base plate. Mark and drill four holes

for wood screws, wall anchors, or masonry screws and a

1⁄2" diameter cable hole. Remove the template.

A-1.2 Thread the cable from the back of the Outside Housing,

through the large hole in the Shim and into the hole in

the wall. Remove the two security screws from the bottom of

the Backplate & Gasket using the small wrench provided in the

bag. Slide the back down about one inch while pulling it away

from the housing.

A-1.3 Position Shim, Gasket & Backplate and fasten with #10 Flat

Head screws in the four large holes or with two #6 Flat Head

screws in the two smaller holes or any combination of each.

A minimum of two #6 screws is recommended.

A-1.4 Push all excess cable into the wall. Hold the top of the Outside

Housing about one inch above the top of the Baseplate that is

now screwed to the wall and push until the Gasket is ﬂush with

the back edges of the Outside Housing. Now push in and down

until the bottom of the Baseplate and the bottom of the

Outside Housing are ﬂush. Use the wrench provided to replace

the security screws.

A-2. GANG BOX INSTALLATION

A-2.1 Mount Gang Box on the wall referring to the Template to

insure clearance above the box. This allows the Keypad

Housing to be moved up, then in and down onto the Baseplate.

Mark and drill holes for wood screws, wall anchors, or masonry

screws and a 1⁄2" diameter cable hole.

A-2.2 Thread the cable from the back of the Outside Housing

through the large hole in the Shim, into the hole in the Gang

Box and into the wall. Remove the two security screws from

the bottom of the Backplate & Gasket using the small wrench

provided in the bag. Slide the back down about one inch while

pushing it away from the housing.

A-2.3 Position the Backplate & Gasket, sandwiching the Shim against

the Gang Box and fasten the Backplate & Gasket with #6 Flat

Head screws into the two smaller holes that line up with the

holes in the Gang Box.

A-2.4 Push all excess cable into the wall conduit. Hold the top of the

Outside Housing about one inch above the top of the Base-

plate that is now screwed to the Gang Box and push until the

Gasket is ﬂush with the back edges of the Outside Housing.

Now push in and down until the bottom of the Baseplate and

the bottom of the Outside Housing are ﬂush. Use the wrench

provided to replace the security screws.

GANG BOX SHIM BACKPLATE

& GASKET

OUTSIDE HOUSING

WITH KEYPAD

SECURITY

SCREWS

C. COMPONENT WIRING CONNECTIONS

C-1 Installation of this system is really quite simple. The door

controller is interfaced to the device that permits access to

the door which typically provides support for either a

magnetic lock or electric strike, along with inputs for remote

exit (RE) and Fire alarm access.

B. SYSTEM COMPONENTS

B-1 Kaba’s E-Plex Stand-Alone Access Controller consists of the

Access Control Unit (ACU) and the Power Interface Unit (PIU).

It is typically used in conjunction with an off-the shelf door

controller or power extender (not included) connected to

either a magnetic lock or electric strike for securing doors or

a parking gate for access control of parking areas. The door

controller which must have battery back-up (manufactured by

Securitron, Altronix, and others) is typically mounted on the

inside wall next to the door or up in a drop ceiling for control

of the door through interface with the magnetic lock or

electric strike.

Kaba

PIU

Door Controller

(other)

Kaba

ACU

KABA E-PLEX®

LIMITED WARRANTY

Kaba Access Control warrants this product to be free from defects in

material and workmanship under normal use and service for a period of

three (3) years. Kaba Access Control will repair or replace, at our discre-

tion, locks found by Kaba Access Control analysis to be defective during

this period. Our only liability, whether in tort or in contract, under this

warranty is to repair or replace products that are returned to Kaba Access

Control within the three (3) year warranty period.

This warranty is in lieu of and not in addition to any other warranty or

condition, express or implied, including without limitation merchantability,

ﬁtness for purpose or absence of latent defects.

ATTENTION: This warranty does not cover problems arising out of

improper installation, neglect or misuse. All warranties implied or written

will be null and void if the lock is not installed properly and/or if any

supplied component part is substituted with a foreign part. If the lock is

used with a wall bumper, the warranty is null and void. If a doorstop is

required, we recommend the use of a ﬂoor secured stop.

The environment and conditions of use determine the life of ﬁnishes on

Kaba Access Control products. Finishes on Kaba Access Control products

are subject to change due to wear and environmental corrosion. Kaba

Access Control cannot be held responsible for the deterioration

of ﬁnishes.

Authorization to Return Goods

Returned merchandise will not be accepted without prior approval.

Approvals and Returned Goods Authorization Numbers (RGA Numbers)

are available through our Customer Service department in Winston-Salem,

NC (800) 849.8324. The serial number of a lock is required to obtain

this RGA Number. The issuance of an RGA does not imply that a credit or

replacement will be issued.

The RGA number must be included on the address label when material is

returned to the factory. All component parts including latches and strikes

(even if not inoperative) must be included in the package with return. All

merchandise must be returned prepaid and properly packaged to the

address indicated.

For your records

Model No.:

Date Purchased:

Dealer:

Name:

Telephone:

For technical assistance please call

1.800.849.TECH (8324) or 336.725.1331

Notes

1.250

4.000

.750

1.500

3.000

7.000

1/2" HOLE FOR CABLE

3.250

1.750

3.281

1.531

'B'

'W' 'W'

1.250

4.000

.750

1.500

3.000

7.000

1/2" HOLE FOR CABLE

3.250

1.750

3.281

1.531

'B'

'W' 'W'

Inhaltsverzeichnis

Andere Kaba Türschloss Handbücher

Kaba

Kaba LCLX Bedienungsanleitung

Kaba

Kaba Simplex 7104 Series Bedienungsanleitung

Kaba

Kaba PowerLever 455 Series Bedienungsanleitung

Kaba

Kaba E-PLEX Bedienungsanleitung

Kaba

Kaba E-Plex 5200 Bedienungsanleitung

Kaba

Kaba E-PLEX 2000 Bedienungsanleitung

Kaba

Kaba SIMPLEX 3000 NARROW STILE Bedienungsanleitung

Kaba

Kaba PowerLever 1550 Bedienungsanleitung

Kaba

Kaba C-lever compact Bedienungsanleitung

Kaba

Kaba E-PLEX 2000 Bedienungsanleitung

Kaba

Kaba Digital Cylinder Bedienungsanleitung

Kaba

Kaba E-PLEX 50XX SERIES Bedienungsanleitung

Kaba

Kaba 7102 series Bedienungsanleitung

Kaba

Kaba Confidant RFID Kit 2 Bedienungsanleitung

Kaba

Kaba Peaks Preferred Bedienungsanleitung

Kaba

Kaba 7002 Series Bedienungsanleitung

Kaba

Kaba Combi B 30 Bedienungsanleitung

Kaba

Kaba E-PLEX 5X51 Bedienungsanleitung

Kaba

Kaba Simplex 1000 Series Installationsanleitung

Kaba

Kaba Simplex 1000 Series Bedienungsanleitung

Kaba

Kaba 5 00 Series Bedienungsanleitung

Kaba

Kaba c-lever 2662-K5 Bedienungsanleitung

Kaba

Kaba ILCO Generation E-760 Series Bedienungsanleitung

Kaba

Kaba E30 Bedienungsanleitung

Beliebte Türschloss Handbücher anderer Marken

Assa Abloy

Assa Abloy effeff 827A-IP Bedienungsanleitung

Iseo

Iseo MA1A Bedienungsanleitung

ID Lock

ID Lock 150 Bedienungsanleitung

Lockly

Lockly ACCESS TOUCH PRO Bedienungsanleitung

iLoq

iLoq G50S Bedienungsanleitung

SDC

SDC Z7835 Bedienungsanleitung

ilco

ilco 452 Bedienungsanleitung

Samsung

Samsung shs-h705 Bedienungsanleitung

TRU-BOLT

TRU-BOLT 08102017 Bedienungsanleitung

CDVI

CDVI 500-LADJ Bedienungsanleitung

Igloohome

Igloohome Deadbolt 2S Metal Grey Montage- und Wartungsanleitung

eSSL

eSSL FL-300 Bedienungsanleitung

Dorma

Dorma MUNDUS PREMIUM GK 50 Benutzerhandbuch

SCOOP

SCOOP Pullbloc 4.1 FS Panik Bedienungsanleitung

Yale

Yale MORTISE 8800 SERIES Bedienungsanleitung

Siegenia

Siegenia KFV AS3500 Bedienungsanleitung

Saflok

Saflok Quantum ädesē RFID Bedienungsanleitung

ArrowVision

ArrowVision Shepherd 210 Bedienungsanleitung