Kamstrup OMNIPOWER Bedienungsanleitung
Instlltion mnul
OMNIPOWER – single-phase
Kamstrup A/S · Industrivej 28, Stilling · DK-8660 Skanderborg · T: +45 89 93 10 00 · [email protected] · kamstrup.com
2 Kmstrup A/S • 55121312_E1_GB_09.2015
OMNIPOWER – single-phase
Installation manual
Connect the meter in ccordnce with the instlltion digrm on the meter’s type lbel.
Depending on the configurtion, fixed vlue is displyed, or the disply chnges be-
tween selected indictions every 10 seconds.
It is possible to chnge the disply reding mnully by ctivting the push button on the
meter. The vilble redings depend on the meter’s configurtion.
Security and installation guidelines
The meter is only to be used for mesuring electricl energy nd shll operte within the
specified vlues only.
The meter must be disconnected when working on it. It cn be highly dngerous to touch
the meter prts when the meter is switched on.
Therefore, the relevnt security fuse must be removed nd kept in plce where it cn-
not be inserted by unuthorized persons.
Current locl stndrds, guidelines, regultions nd instructions must be observed. Only
uthorized personnel is permitted to instll electricity meters.
Meters for direct connection must be protected ginst short circuit by security fuse in
ccordnce with the mximum current stted on the meter.
Filing to obey the ”Guidelines for sfety nd instlltion”, the gurntee no longer p-
plies.
3Kmstrup A/S • 55121312_E1_GB_09.2015
OMNIPOWER – single-phase
Installation manual
LCD disply
Opticl interfce
LED (meter constnt)
LED breker sttus
(only meters with
internl breker)
Utility sels
Type lbel
Secondry module
Push button
Selble push button
The meter constnt LED blinks proportionlly to the consumed ctive energy.
Only uthorized personnel my brek the utility seling.
4 Kmstrup A/S • 55121312_E1_GB_09.2015
OMNIPOWER – single-phase
Installation manual
The phse indictions hve vrious functions. They indicte the two situtions described
below.
From the connection of the meter:
Indications L1 Indicate
On Voltge is bove minimum limit (160V))
Off Voltge is below minimum limit (160V)
Indications Indicate
On Lod is bove minimum limit (2.3W)
Off Lod is below minimum limit (2.3W)
If the lod exceeds the minimum limit nd the meter is configured with this reding, con-
sumption will be indicted vi the qudrnt reding. The direction of the phse current is
lso indicted by the rrow of L1, regrdless of configurtion.
7-digit identifiction field
Qudrnt indiction
Module indiction Text field
Unit field
Breker symbol
Tmper symbol
Triff indiction
Rdio network symbol
Error symbol
9-digit vlue field
Phse current indiction
Prepyment symbol
Supply voltge indiction
5Kmstrup A/S • 55121312_E1_GB_09.2015
OMNIPOWER – single-phase
Installation manual
Terminals OMNIPOWER OMNIPOWER ST-meter
Multi-core 7-core Mssive / terminls Multi-
core
7-core
35 mm2≥ 6 mm2≥ 6 mm2≥ 2.5 mm2> 6 mm2 > 6 mm2
Screw: Pz 2 or stright slot Screw: Pz 2 or stright slot
Torch: 2.5 – 3 Nm Torch: 3 – 3.5 Nm
Load control, installation
For meters with lod control rely(s). Due to the dely in the meter, it is importnt to re-
strt the meter (off/on) when the time is set correctly in the meter. This plces the relys
in the correct position nd stops the dely timer.
With built-in radio
If the meter is supplied with integrl rdio for estblishment of remote reding, the meter
utomticlly strts to connect to rdio network. The integrl rdio is equipped with n
internl ntenn. The rdio signl strength cn be red vi the system. If the rdio signl
is not sufficient, n externl ntenn must be connected. Plese see current documen-
ttion on vilble ntenns.
Mounting communiction module in the meter my influence the rdio communic-
tion. Plese contct Kmstrup A/S.
With disconnect function
With this type of meter, it must be checked tht the red diode is switched off. This indi-
ctes tht the consumer’s supply is disconnected.
6 Kmstrup A/S • 55121312_E1_GB_09.2015
OMNIPOWER – single-phase
Installation manual
Installation dimensions
OMNIPOWER OMNIPOWER ST
237,7
81,6
128,7
177,7
81,6
81.6
177.7
237,7
81,6
128,7
177,7
81,6
237,7
81,6
128,7
177,7
81,6
81.6
237.7
128.7
128,7
233,6
81,6
174,7
81,6
128.7
81.6
81.6
233.6
174.7
Connection diagrams
The vlid connection digrm ppers from the type lbel.
OMNIPOWER OMNIPOWER ST
123456
L1
N
S0 +
20
-
21
P+
N
1
L
325 46
N
L
Main Load
S0 +
20
-
21
P+
7Kmstrup A/S • 55121312_E1_GB_09.2015
OMNIPOWER – single-phase
Connection diagram for modules
Tilslutningsskema for moduler (DK)
Connection diagram for modules (GB)
Anschlussschema für Module (DE)
Schéma de raccordement pour modules (FR)
Serial
63
64 GND
REQ
62 DATA
Pulse in/tariff 1+2/max reset
M-Bus network
25
24 M-Bus
230 VAC relay output for Load Control
Current loop
+
÷
32/144
33/145
230V supply
65
66
+
÷
Red/brown 2
Blue 11
3 System, 4 wire
Red/brown 2
Blue 8
3 System, 3 wire
Tariff 1+2
230 V
13 15
Tariff 3+4
230 V
15 33
18
19
RS-485
137 TX- / RX-
138 TX+ / RX+
17/17A NC
18/18A Common
19/19A NO
LON-Bus
55
56
LON 1/A
LON 2/B
Pulse out relay
A+
140
141
A-/R+
142
143
SO-supply
A+
40
41
+
÷
8 Kmstrup A/S • 55121312_E1_GB_09.2015
OMNIPOWER – single-phase
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Kamstrup Messgerät Handbücher
Kamstrup
Kamstrup flowIQ 3100 Bedienungs- und Montageanleitung
Kamstrup
Kamstrup MULTICAL 61 Stücklistenhandbuch
Kamstrup
Kamstrup MULTICAL 402 Bedienungsanleitung
Kamstrup
Kamstrup MULTICAL 801 Stücklistenhandbuch
Kamstrup
Kamstrup MULTICAL 302 Bedienungsanleitung
Kamstrup
Kamstrup 382 Bedienungsanleitung
Kamstrup
Kamstrup MULTICAL 403 Stücklistenhandbuch
Kamstrup
Kamstrup MULTICAL 6M2 Bedienungsanleitung
Kamstrup
Kamstrup MULTICAL 302 Bedienungsanleitung
Kamstrup
Kamstrup M-Bus Stücklistenhandbuch
Kamstrup
Kamstrup MULTICAL 41 Stücklistenhandbuch
Kamstrup
Kamstrup MAXICAL III Bedienungsanleitung
Kamstrup
Kamstrup MULTICAL 62 Bedienungsanleitung
Kamstrup
Kamstrup MULTICAL 803 Stücklistenhandbuch
Kamstrup
Kamstrup OMNIPOWER Bedienungsanleitung
Kamstrup
Kamstrup MULTICAL 803 Bedienungsanleitung
Kamstrup
Kamstrup MULTICAL 41 Bedienungsanleitung
Kamstrup
Kamstrup READy Collector Bedienungsanleitung
Kamstrup
Kamstrup MULTICAL 302 Stücklistenhandbuch
Kamstrup
Kamstrup flowIQ 2101 Stücklistenhandbuch
