Kenmore 116.35622 Bedienungsanleitung

Owner'sManual

ManualDe/Propietario

VacuumCleaner

Aspiradora

Model, Modelo 116.35622

116.35623

CAUTION:

Read and follow all

safety and operating

instructions before first

use of this product.

CUIDADO:

Leay siguetodaslas

instruccionesde operaci6n

yseguddad antesdel usode

esteproducto.

Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A.

www.sears.com

Printed in Mexico

Part No. C01ZCKAO_UI3_-KCa1ZCKAZI3UO Impreso en Mexico

Before Using Your New

Vacuum Cleaner .................... 2

Kenmore Vacuum Cleaner Warranty ... 2

Important Safety Instructions ......... 3

Parts and Features .................. 4

Assembly instructions ............. 5-6

Operating Instructions ............... 6

Cord Release ....................... 6

Pile HeightSelectionand Setting ........ 7

Carpet/Bare FloorSelector ............ 7

Releasingthe Handle ................. 6

TouchControl ...................... 8

Attachments ..................... 8-10

AttachmentUse Chart ............... t0

VacuumingTips .................... 11

PerformanceFeatures ............. 11-12

Vacuum Cleaner Care ............... 13

VacuumCleaner Storage ............. 13

CleaningExteriorand Attachments ..... 13

DustBag Replacement .............. 14

FilterReplacement .................. 15

BeltChangingand Agitator

Cleaning ....................... 16-18

Clog Removal ..................... 19

LightBulb Replacement .............. 20

AgitatorServicing................... 21

Troubleshooting .................... 22

Requesting Assistance

Or Service ................... BackPage

Please read this guide. It will help you assemble and operate your new Kenmore vacuum

cleaner in the safest and most effective way.

For more information about vacuum cleaner care and operation, call your nearest Sears store.

You will need the complete model and serial numbers when requesting information. Your vacu-

um cleaner's model and serial numbers are located on the Model and Serial Number Plate.

Use the space below to record the model number and serial number of your new Kenmore

vacuum cleaner.

Model No.

Serial No.

Date of Purchase

Keep this book and your sales check (receipt) in asafe place for future reference.

LIMITED ONE YEAR WARRANTY ON KENMORE VACUUM CLEANER

This warranty is for one year from the date of purchase, and includes only private household

vacuum cleaner use. During the warranty year, when this vacuum cleaner is operated and

maintained according to the owner's manual instructions, Sears will repair any defects in

material or workmanship free of charge.

This warranty excludes vacuum cleaner bags, belts, light bulbs, and filters, which are

expendable parts and become worn during normal use.

For warranty service, return this vacuum cleaner to the nearest Sears Service Center in

the United States.

This warranty applies only while this product is in use in the United States. This warranty gives

you specific legal rights, and you may also have other rights which vary from state to state.

Sears, Roebuck and Co., D/817 WA, Hoffman Estates, IL 60179

WARNING: Your safety is important to us.To reduce the risk

of fire, electrical shock, injury to persons or

damage when using your vacuum cleaner, follow

basic safety precautions including the following:

Read allinstructions in this manual before

assembling or using your vacuum cleaner.

Use your vacuum cleaner only as

described in this manual. Use only with

Sears recommended attachments.

Disconnect e_ectficalsupply before per-

forming maintenance to the brush area.

Failure to do so could result in electrical

shockor injury from movingparts.

Do not leave vacuum cleaner when

plugged in. Unplug from outlet when not in

use and before performing maintenance.

To reduce the risk of electrical shock -Do

not use outdoors or on wet surfaces.

Do not allow to be used as a toy. Close

attention is necessary when used by or

near children.

Do not use with a damaged cord or plug.

If vacuum cleaner is not working as !t

should, has been dropped, damaged, len

outdoors or aroppeo in water return itto a

Sears Serv ce Center.

Do not pull or carry by cord, use cord as

a handle,close a door on cord, or pull cord

around sharp edges or corners. Do not run

vacuum cJeaner over cord. Keep coro

away from heated surfaces.

Do not unplug by pulling on cord. To

unplug, grasp the plug, not the cord.

Do not handle plug or vacuum cleaner with

wet hands.

Do not put any objects into openings.

Do not use with any opening blocked;

keep free of dust, lint, hair, and anything

that may reduce air flow.

Keep hair, loose clothing,fingers, and all

parts of body away from openings and

moving parts.

Turn off all controlsbefore unplugging.

Do not restvacuumcleaner onsteps.

Do not put on chairs,tables, etc. Keep

on floor.

Do not use vacuum cleaner to pick up

flammable or combustibleliquids(gaso-

line, cleaning fluid, pedumes, etc.), or

use in areas where they may be present.

The fumes from these substances can cre-

ate a fire hazard or explosion.

Do not pick up anything that is burning or

smoking, such as cigarettes, matches, or

hot ashes.

Do not use vacuum cleaner withoutdust

bag and/orfilters in place.

Always change the dust bag after vacu-

uming carpet cleaners or freshener, pow-

ders, and fine dust. These products clo(

the bag, reduce airflow and can cause the

bag to burst, Failure to change the bag

promptly could cause permanent damage

to the cleaner.

Do not use the vacuum cleaner to pick up

sharphard objects,smalltoys,pins,paper

clips, etc. They may damagethe cleaneror

dustbag.

Always turn off and unplug the vacuum

cleaner before connectin_l or disconnect-

ing either hose, Handi-ma'[e Jr.

You are responsible for making sure that

your vacuum cleaner is not used by any-

one unable to operate it properly.

SAVE THESE INSTRUCTIONS

Proper assembly and safe use of your vacuum cleaner are your responsibilities. Your

cleaner is intended for Household use. Read this Owner's Manual carefully for important

use and safety information. This guide contains safety statements under warning and

caution symbols.

It is important to know your vacuum cleaner's parts and features to assure its proper and

safe use. Review these before using your vacuum cleaner.

Item Part No. Part No.

In U.S, In Canada

Dust Bag 20-50690 20-50690C

Headlight Bulb 20-5240 20-40600

Belt 20-5275 20-40096

Exhaust Filter 20-86889 20-86889C

Motor Safety Filter 20-86884 20-86884C

Control

Bag Cover Sensor

Quick Release

Handi-MateJ_®

Caddy

HandI-Mate Jr.®

Lower

Cord Hooks

Carry

Crevice

Tool

Telescoping

Dusting

Combination

Brush

Handle

Release

Pedal

Model/Serial

Numbers

Height

Level

Ready-to-Use

////..No.

Stretch Hose

Motor

Protector

Agitator

(Underneath)

Floor Selector

Headlight

Cover

Latch

Base

Belt

(Underneath)

EXTENSION HOSE KITS

Extension Hose

Handi-Mate Jr. ®

_IPlease payspecial attentionto these hazardalert boxes,and follow anyinstructionsl

Igiven. WARNING statementsalertyou tosuchdangersas fire, electricshock,burnsI

land personal injury. CAUTION statements alert you to such dangerouspersonalI

linjury and/or propertydamage, I

WARNING

Electrical Shock Hazard

Do not plug into the electrical sup-

ply until the assembly is complete.

Failure to do so could result In elec.

trical shock or injury.

Before assembling your vacuum cleaner, be

sure you have all the parts as shown in

PARTS AND FEATURES.

Attach stretch hose

end to nozzle as

shown.

HANDLE ASSEMBLY

Remove the screw located just below the

top edge of the back of the vacuum cleaner.

Screw

Position the handle as shown in the illustra-

tion below.

Slide the handle into the opening at the top

of the vacuum cleaner.

Handle

Screw

Hole

insert the screw so it passes through the

handle into the vacuum cleaner.

Begin to tighten the screw with your fingers.

It may be necessary to adjust the handle

slightly. Using a screwdriver, tighten the

screw.

Do not overtighten.

Overtightening could strip the

screw holes.

Do not operate the vacuum cleaner

without the screw in place,

CORD ASSEMBLY

Make sure the quick release upper cord

I-3ookis in the upright position. Remove

the wire tie from the power cord.

Lock the power cord

into the locking notch

base by pressing it

into the quick release

upper cord hook as

shown. This helps

keep the power cord

out from under the

vacuum cleaner agi-

tator.

Power

Wrap the power cord around the upper

and lower cord hooks and lock the power

cord plug onto the power cord.

Quick Release

Lower

HANDI-MATE JR.®

For operation of Handi-Mate Jr.® see

separate Owners Manual.

La_h_ __

TO INSERT HANDI-MATE JR®

Place the rear of the Handi-Mate Jr.® into

the caddy. Rotate the Handi-Mate Jr.®

back untilit snaps into place.

TO REMOVE HANDI-MATE JR.®

Rotate Handi-Mate Jr.® out of the caddy.

OPERATING INSTRUCTIONS

1. Turn the

Release

Upper Cord quick release

Hook upper cord

hook to either

side and down

to release the

power cord.

WARNING

• To reduce the risk of electric shock,

this vacuum cleaner has a polarized

plug (one blade is wider than the

other).

•The plug will fit in a polarized outlet

only one way. If the plug does not fit

fully in the outlet, reverse the plug. If

it still does not fit, contact a qualified

technician to install the proper outlet.

Do not change the plug in any way.

2. Detach the power cord plug from the

power cord and pull the cord off the quick

release upper cord hook. Be sure the power

cord is still locked into the locking notch of

the upper cord hook.

3. Be sure the vacuum cleaner has bag

installed. See DUST BAG REPLACEMENT.

4. Plug the polarized power cord into a 120

Volt outlet located near the floor.

5. To replace cord, turn upper hook counter-

clockwise pointing up, then wrap cord.

WARNING

Injury and Product Damage

Hazard

• DO NOT place hands or feet under

the unit at any time.

•DO NOT use outlets above coun-

ters. Damage from cord to items in

urroundin area could occur.

Toselectapileheightsetting:

Turnoffvacuumcleaner. Select a pile height

setting by tilting the vacuum cleaner back

until front wheels are lifted slightly off the

floor.

Slide the adjustment lever to the correct

setting.

There are tour (4) pile height settings on the

vacuum cleaner. Use the LOW setting for

most low-pile carpets and bare floor

cleaning (with agitator OFF), and the HIGH

setting for high-pile carpets like shag carpet,

scatter rugs, etc. Use the other settings as

needed for carpet heights in-between low

and high pile.

CAUTION

Do not allow vacuum cleaner to

remain in one spot for any length

of time when the agitator is turn-

ing. Damage to carpet may occur.

SOME MODELS

Bare floor setting: Slide the carpet/bare

floor selector all the way back and down

toward the bottom of the nozzle until it

locks into place.

In this position the brush assembly does

not revolve. This setting should be used

for cleaning hardwood and tile floors and

when any attachments (tools) are

used.

Carpet setting: Slide the selector all the

way forward and up to the carpet

position.

In this position the brush assembly will

turn. When carpets are being cleaned the

selector should be in this position.

Attention: Refer to your carpet manufac-

turers cleaning recommendations. Some

more delicate carpets may require that

they be vacuumed with the agitator turned

off, to prevent carpet damage.

!CAUTION

Do not allow vacuum cleaner to

remain in one spot for any length

of time when the agitator is turn-

ing. Damage to carpet may occur.

Note: For longer belt life, turn the vacuum

cleaner off before moving selector, other-

wise make sure the selector is pushed

fully and quickly as possible to the

desired position. Failure to do so can

cause the belt to rub on the selector shaft

and may result in the belt becoming hot

and creating a burning rubber smell.

Carpet/Bare

Floor Selector

To Bare Floor

Position

To Carpet

Position

Releasethehandlebypressingdownon

thehandlereleasepedalwithyourfoot

and pulling back and down on the handle

with your hand.

Release Pedal

OFF - Turns OFF the vacuum (suction)

motor.

ON -Turns ON the vacuum motor to HIGH

suction level for cleaning of most carpets

and rugs. In order to get MEDIUM and

LOW suction levels for cleaning, press the

SUCTION button to cycle the vacuum

motor through MEDIUM, LOW, and HIGH

suction levels respectively.

SUCTION - Changes the suction level of

the vacuum cleaner motor. If the unit is

OFF, pressing the SUCTION button turns

ON the vacuum cleaner motor to HIGH

suction level for cleaning of most carpets,

rugs, and fabrics, if the unit is ON, press-

ing the SUCTION button cycles the vacu-

um cteaner motor through suction levels.

Dusting

Combination Hos_

_Hose

Collar

Identify each of the attachments shown

above.

TO USE ATTACHMENTS

Place the carpeVbare floor selector in the

bare floor setting by rotating the selector

back and down to the bare floor setting.

See CARPET/BARE FLOOR SELEC-

TOR section.

When returning the bare floor selector to

the carpet setting, use caution as the

selector can move quickly to that set-

ting due to tension created by the belt.

Remove the tower end of the stretch hose

from the cleaner by grasping the hose

collar, twisting and pulling straight out.

The attachments can now be added to

the hose.

Note: The motor protector may open

when using attachments or when cleaning

new carpet, due to reduced airflow

caused by the attachments themselves or

by new carpet lint filling the bag quickly.

See the

TROUBLESHOOTING section.

Electrical Shock And Personal

Injury Hazard

Disconnect electrical supply before

performing maintenance to the

unit. Failure to do so could result in

electrical shock or personal injury

from vacuum cleaner suddenly

starting.

Remove the

hose from the Hose

hose clip by

pulling straight

out.

TELESCOPIC WAND WITH

SUCTION CONTROL SLIDE

Crevice

Tool Remove the

Telescopic telescopic

Wand wand from

its storage

position.

Remove the crevice tool from its storage

position in the wand. Turn the locking ring to

the UNLOCK position.

Extend the wand to its full length. Turn the

locking ring to the LOCK position. Attach

the extension wand onto the open end of

the hose.

Lower_"_ '_ Suction

Wand'-""-_'.,_"_p_ Control Slide

_Wand _.-_..]

_Unloc_ "_,-<- Upper

Wand

Align the tabs on the extension wand with

the "J" slots in the hose (as illustrated above

right). Push the wand into the hose and

twist to the right to lock.

To achieve maximum Hose-

reach with the attach-

ments, add the crevice

tool to the end of suction

the wand by Control

inserting and

twisting slightly.

Telescopic

Wand

Toot "Ra_ed

The dusting

brush or the

combination

brush may be

attached direct-

ly to the wand

or placed on

the end of the

crevice tool.

TO OPERATE SUCTION

CONTROL SLIDE

Telescopic Wand

When using

attachments for \

cleaning Suction

Control

draperies, small S#de

rugs with low pile

and other

delicate items,

twist the suction

control stide to

the open

position. This slide is located on the

telescopic wand, close to the hose.

This will reduce suction for ease of cleaning.

Note: Return suction control slide to the

closed position for normal cleaning.

When using attachments, be careful not

to overextend the stretch hose when

reaching. Trying to reach beyond the

hose stretch capability could cause the

vacuum cleaner to tip over, Make sure the

carpet/bare floor selector is in the bare

floor position. Damage to the floor sur-

face may occur ifthe carpet setting is

used.

TO STORE ATTACHMENTS

Remove dusting brush or combination

Drush. Snap into appropriate storage location.

Remove crevice tool from the wand by twist-

ing. Lay aside.

Remove the extension wand from the hose.

Twist the wand to the left and pull from the

hose end.

Wand

Unlock \

Locking

Ring I_

Upper

Wand

Unlock the wand by turning the wand lock-

ing ring to the UNLOCK position.

Slide the lower wand into the upper wand,

Turn the wand locking ring to the LOCK

position.

Place the crevice tool down into the com-

pressed wand. Snap into the appropriate

storage location.

Reinsert the hose fully into the opening on

the nozzle body from which it was removed.

Press firmly to assure connection

!CAUTION

DO NOT pull the vacuum cleaner

around the room by the hose.

Property damage or personal injury

could result.

EXTENSION HOSE

Some models include an extension hose

which connects to the stretch hose on the

vacuum cleaner for alonger cleaning reach.

Insert the two tabs on the end of the

Unit Hose _Extension Hose

extension hose into the two "J" shaped slots

on the stretch hose and twist to connect.

All attachments and the telescopic wand can

be attached to the open end of the hose.

CAUTION

When using the stretch hose or with

the extension hose attached, the

vacuum cleaner should be on a solid

surface on the same level or below

the level of the user's feel DO NOT

use the hoses when the vacuum

cleaner is above the level of the

user's feet.

ATTACHMENT

DUSTING BRUSH

CREVICE TOOL

COMBINATION BRUSH

Handi-Mate Jr.®

CLEANING AREA

Furniture*

on fabrics.

Between

Cushions*

*Always clean attachmentsbefore usin

Stairs Walls

V' =Applicable

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Kenmore Staubsauger Handbücher

Kenmore

Kenmore 116.30412 Bedienungsanleitung

Kenmore

Kenmore Crossover Max DU3018 Bedienungsanleitung

Kenmore

Kenmore SpotLite KW2001 Bedienungsanleitung

Kenmore

Kenmore 81714 Bedienungsanleitung

Kenmore

Kenmore 3704 - Bagless Upright Vacuum Bedienungsanleitung

Kenmore

Kenmore 721.35820500 Einrichtungshandbuch

Kenmore

Kenmore 116.29319 Bedienungsanleitung

Kenmore

Kenmore 116.31810 Bedienungsanleitung

Kenmore

Kenmore Go CSV DS4020 Bedienungsanleitung

Kenmore

Kenmore Galaxy 721.36078 Bedienungsanleitung

Kenmore

Kenmore DS6001 Bedienungsanleitung

Kenmore

Kenmore CSV Max DS4090 Bedienungsanleitung

Kenmore

Kenmore CSV Go DS4020 Bedienungsanleitung

Kenmore

Kenmore 116.34725 Bedienungsanleitung

Kenmore

Kenmore 116.28614 Bedienungsanleitung

Kenmore

Kenmore Pet PowerMate 116.C85SPDEE3V022 Bedienungsanleitung

Kenmore

Kenmore 116.25812 Bedienungsanleitung

Kenmore

Kenmore ASPIRADORA 116.36722 Bedienungsanleitung

Kenmore

Kenmore 116.20512 Bedienungsanleitung

Kenmore

Kenmore 27814 - Canister Vacuum, Yellow Bedienungsanleitung

Kenmore

Kenmore 114.85925 Bedienungsanleitung

Kenmore

Kenmore SSV Complete 125.10441710 Bedienungsanleitung

Kenmore

Kenmore Progressive DU2001 Bedienungsanleitung

Kenmore

Kenmore 116.22614 Bedienungsanleitung

Beliebte Staubsauger Handbücher anderer Marken

Bissell

Bissell LittleGreen Proheat 1425 Series Bedienungsanleitung

Panasonic

Panasonic MC-YL637S147-AE Bedienungsanleitung

NEFF

NEFF N17XH10 0 Series Bedienungsanleitung

LG A9 Series Bedienungsanleitung

Oreck

Oreck Cordless Captura BK51700 Series Bedienungsanleitung

Kogan

Kogan KAVACROBVWA Bedienungsanleitung

Kränzle

Kränzle VENTOS 50 ID Benutzerhandbuch

EVVO

EVVO Ai35 Bedienungsanleitung

DeWalt

DeWalt DWH200D Bedienungsanleitung

Pontec

Pontec Pondomatic Vacuum Cleaner Bedienungsanleitung

Cleanmaxx

Cleanmaxx PC-P007E Bedienungsanleitung

Exido

Exido 240-114 Bedienungsanleitung

RIDGID

RIDGID WD1685AU0 Bedienungsanleitung

Ezviz

Ezviz RE4P Bedienungsanleitung

STG global

STG global TANVAC HDV3000 Bedienungsanleitung

Shark

Shark ROTATOR PRO COMPLETE NV550 Series Bedienungsanleitung

Factory

Factory M3340 Bedienungsanleitung

Shop-Vac

Shop-Vac VN92 SERIES Bedienungsanleitung