Key Digital KD-CATHD500Pro Bedienungsanleitung

HDBT/HDMI via Single CAT6/STP (Tx/Rx)

Extenders with EDID Control, RS-232, IR,

HDMI Pass-through and Ethernet

The Experts in Digital Video Technology and Solutions™

KD-CATHD500Pro

Key Digital®Systems :: 521 East 3rd Street :: Mount Vernon, NY 10553

Phone : 914.667.9700 Fax : 914.668.8666 Web : www.keydigital.com

Rev 0 – May 2013

Setup Guide

Key Digital

, led by digital video pioneer Mike Tsinberg,

develops and manufactures high quality, cutting-edge

technology solutions for virtually all applications where

high quality video imaging is important. Key Digital

is at the forefront of the video industry for Home Theater

Retailers, Custom Installers, System Integrators,

Broadcasters, Manufacturers, and Consumers.

KD-CATHD500Pro_Manual.indd 2-3 5/13/13 9:20 AM

4 1

Please read all instructions to insure safe operation of the product.

CAT6/STP CABLING IS REQUIRED. All included specifications are based

on the use of CAT6 STP with properly shielded RJ45 connectors

You MUST use the Power Supply provided with your unit or you VOID

the Key Digital

Warranty and risk damage to your unit and associated

equipment.

About KD-CATHD500Pro

Description

KD-CATHD500Pro HDBT/HDMI (Tx/Rx) Extenders extend 1080p/60, 1920x1200,

3D signals up to 400 ft. via single Key Digital

KD-CAT6STP1X Super CAT6

Shielded cable, or up to 300 ft. using a single third-party CAT6 shielded cable.

KD-CATHD500Pro carries IR and RS-232 for controlling remotely located equipment.

Ethernet ports allow 10/100 LAN Network extension.

Key Features

➔Auto-adjustment of feedback, equalization and ampliﬁcation depending

on the length of cabling used

➔Internal EDID Library features 10 default EDID conﬁgurations including

native EDID data from any Output/Display

➔Features both Transmit and Receive IR, RS-232 and Ethernet for bi-directional

control signals

➔Full support for 12-Bit Deep Color Video

➔Supports lossless compressed digital audio:

»Dolby

TrueHD, Dolby

Digital Plus and DTS

™

-HD Master Audio

Key Beneﬁts

➔HDMI, IR, RS-232 and Ethernet signals combined over a single CAT6/STP

➔HDMI pass-through port on Tx Balun connects additional devices up to 20 ft.

➔Daisy chaining of Tx and Rx units allows almost unlimited extension

of HDMI, RS-232, IR and Ethernet signals

➔Supports HDBaseT

™

Technology

Advanced HDMI Features

➔3D – Capability to pass 3D stereoscopic signal formats

Accessories

➔(2) 5V 2A DC Power Supplies �(2) Mounting Brackets

➔(3) Locking HDMI Cable Clips �(1) Grounding Wire

Table of Contents

About KD-CATHD500Pro ...........................................1

Connections .....................................................2

Extending Ethernet, IR and RS-232 Control .............................4

Application Example ...............................................5

Settings.........................................................6

Speciﬁcations ....................................................8

Important Product Warnings .........................................10

Safety Instructions .................................................10

How to Contact Key Digital ..........................................11

Warranty ........................................................11

KD-CATHD500Pro_Manual.indd 1 5/13/13 9:20 AM

2 3

Connections

Before making any connections, power off your source and display devices.

Tx Balun:

➔Using a short HDMI cable, connect your source device to the HDMI port labeled

“HDMI Input”. To connect DVI, use appropriate DVI to HDMI adapters.

➔Connect the CAT6 STP cable that connects to the Rx Balun at the port labeled

“CAT6 STP Output”.

➔You may use the port labeled “HDMI Pass-Through” to connect (up to 20 ft.)

your AVR, display or other device to the Tx unit.

➔If desired, you may connect your IR signals to send (port labeled Tx), or receive

(port labeled Rx).

➔Additionally you may connect a 10/100 Ethernet LAN cable to the “TCP/IP” port

➔and an RS-232 cable to the DB9 port to transmit RS-232 signals.

Rx Balun:

➔Using a short HDMI cable, connect your display device to the HDMI port labeled

“HDMI Output”.

➔Connect the CAT6 STP cable at the port labeled “CAT6 STP Input”.

KD-CATHD500Pro_Manual.indd 3 5/13/13 9:20 AM

4 5

➔If you are using IR, connect it at this time. For Ethernet, connect the cable

to TCP/IP RJ45 port.

➔If you are using RS-232, connect to the RS-232 port.

➔Power up the Baluns using the included power supplies and then power up your

source and display equipment.

Extending Ethernet, IR and RS-232 Control

➔Ethernet

»The KD-CATHD500Pro can transmit standard 10/100BaseT LAN data.

You can use TIA 568B standards for termination.

➔RS-232

»You can use the KD-CATHD500Pro to send RS-232 commands for controlling

remote equipment.

»Requires the use of a null-modem cable on one (either) side.

➔IR

»You may transmit IR information in either direction. The IR input can be from a

dedicated control system or a standard distribution block’s emitter outputs.

Use a ﬁxed 5v input signal with a 3.5mm mono mini jack.

»The sleeve of the 3.5mm Male connector must have good physical contact

with 3.5 mm Female input/output on the KD-CATHD500Pro.

»Some 3.5mm Male plugs feature a plastic sleeve

that extends longer than an average sleeve. This

may cause poor grounding contact. See the

example to the right of a sleeve that may cause

poor contact.

Application Example

HDMI

Ethernet

CAT6/STP

Up to 400’

with Key Digital

KD-CAT6STP1X

Up to 400’ – with Key Digital

KD-CAT6STP1X

Up to 300’ – with 3rd Party CAT6/STP

Achieved Distance: up to 860’

20’

KD-CATHD500Pro

KD-CATHD500Pro KD-CATHD500Pro

KD-CATHD500Pro

CAT6/STP

Ethernet LAN

IR Rx

IR Tx

HDMI/DVI*

HDMI

IR Tx

HDMI

KD-IRKIT300

Display

Blu-Ray

IR Emitter

IR Receiver

(to control TV)

TV Remote

IR Emitter

IR Receiver

(to control DVD)

Blu Ray Remote

HDMI Pass-through

KD-CATHD500Pro_Manual.indd 4-5 5/13/13 9:20 AM

6 7

The EDID controls are located on the Tx Balun. To change EDID settings, use a small

ﬂat bladed screwdriver to turn the rotary switch to the desired EDID number. The

switch has click positions to make sure the arrow is pointing at a number and not

in-between. There is no need to power the unit off when adjusting the EDID settings.

The unit will automatically renegotiate the new handshake in a few seconds. Please

follow this procedure for subsequent EDID changes.

When selecting an EDID from the library, your source device will “see” the KD-

CATHD500Pro EDID choice instead of the display’s EDID, overriding the display’s

EDID information. If your display is not capable of accepting the video resolution or

audio type selected, you may not see a picture or hear sound. In this case please

choose another more compatible EDID, or use the default EDID.

Range and Resolution:

➔KD-CATHD500Pro w/ KD-CAT6STP1X Super CAT6 Shielded cabling:

All resolutions up to 1080p, 1920x1200, 3D up to 400ft

➔KD-CATHD500Pro w/ Third-Party CAT6/STP cabling: All resolutions up to

1080p, 1920x1200, 3D up to 300ft

NOTE: Use metal shielded RJ45 connectors

with soldered ground wires when terminating

the CAT6 STP. Key Digital SKU: KD-RJ45SC

Settings

EDID Control

EDID adjustments may be necessary when connecting to or from an AV Receiver, or

for passing 3D content derived from a Cable or Satellite source. They can also speed

up the switching process from Cable or Satellite.

The possible EDID settings can range from ‘0’ to ‘9’ (‘0’ is the default).

0EDID from connected display

11080i w/ PCM 2ch Digital Audio

21080i w/ HD Audio

31080p w/ PCM 2ch Digital Audio

41080p w/ HD Audio

53D w/ PCM 2ch Digital Audio

63D w/ Dolby Audio

73D w/ HD Audio

8DVI 1080p (no audio)

9DVI 1080p with Forced HPD (no audio)

Rotary EDID Control Switch

Daisy Chain Example:

HDMI

Ethernet

CAT6/STP

Up to 400’

with Key Digital

KD-CAT6STP1X

Up to 400’ – with Key Digital

KD-CAT6STP1X

Up to 300’ – with 3rd Party CAT6/STP

Achieved Distance: up to 860’

20’

KD-CATHD500Pro

KD-CATHD500Pro KD-CATHD500Pro

KD-CATHD500Pro

CAT6/STP

Ethernet LAN

IR Rx

IR Tx

HDMI/DVI*

HDMI

IR Tx

HDMI

KD-IRKIT300

Display

Blu-Ray

IR Emitter

IR Receiver

(to control TV)

TV Remote

IR Emitter

IR Receiver

(to control DVD)

Blu Ray Remote

HDMI Pass-through

KD-CATHD500Pro_Manual.indd 6-7 5/13/13 9:20 AM

8 9

General

➔Regulation: CE, FCC, RoHS, WEEE

➔Enclosure: Black Metal

➔Product Dimensions (Each): L = 6” W = 4.1” H = 1.2”

➔Shipping Carton Dimensions: L = 15.4” W = 8.7” H = 3.6”

➔Product Weight (Each): 1 lb

➔Shipping Weight: 3 lbs

➔Power: UL Certiﬁed Power Supply – 5V / 2A, 110-240 VAC, 50-60 Hz

➔Power Consumption: Tx - 2.5 Watts, Rx - 5 Watts

➔Accessories: (2) Mounting Brackets, (3) Locking HDMI Cable Clips,

(1) Grounding Wire

Firmware Updates:

The KD-CATHD500Pro Tx and Rx have an

“Upgrade Mode” switch located near the RS-

232 port. The 2 position slide switch is marked

“Normal” and “Program”. This switch should

only be used in the “Program” position when

updating unit’s ﬁrmware. Be sure the switch is in

the “Normal” mode for standard operation.

Speciﬁcations

Technical:

➔Inputs Tx (Each): 1 HDMI, 1 Serial IR Rx, 1 RS-232, 1 TCP/IP

➔Outputs Tx (Each): 1 CAT6 STP, 1 HDMI pass-through, 1 Serial IR Tx

➔Inputs Rx (Each): 1 CAT6 STP, 1 Serial IR Rx

➔Outputs Rx (Each): 1 HDMI, 1 Serial IR Tx, 1 TCP/IP, 1 RS-232

➔HDMI

and HDCP Licensing: Fully licensed and compatible with all HDMI

and HDCP techologies

➔KD-CATHD500Pro Link and Range: 1080p/60, 1920x1200, 1080i/60, 720p,

1080p/24; up to 400ft when used with KD-CAT6STP1X cabling, 300ft when used

with third-party CAT6/STP cabling.

➔Lossless Compressed Digital Audio Support: Dolby

TrueHD, Dolby

Digital Plus

and DTS

™

-HD Master Audio

➔DDC Signal (Data): Input DDC Signal: 5 Volts p-p (TTL)

➔HDMI Video/Audio Signal: Input Video Signal: 1.2 Volts p-p

➔HDMI Connector: Type A, 19 Pin Female

➔RJ45 Connector: Shielded Link Connector

➔Ethernet RJ45 Connector: Shielded TCP/IP 10/100 BaseT

➔IR Connector: 3.5 mm monaural mini jack

➔RS-232 Connector: D-Sub 9 Pin

➔I2C Communication: EDID and HDCP bi-directional transparency

from Display to Source

KD-CATHD500Pro_Manual.indd 8-9 5/13/13 9:20 AM

10 11

Important Product Warnings:

1. Connect all cables before providing power to the unit.

2. Test for proper operation before securing unit behind walls or in hard to access

spaces.

3. If installing the unit into wall or mounting bracket into sheet-rock, provide proper

screw support with bolts or sheet-rock anchors.

Safety Instructions:

Please be sure to follow these instructions for safe operation of your unit.

1. Read and follow all instructions.

2. Heed all warnings.

4. Do not use this device near water.

5. Clean only with dry cloth.

6. Install in accordance with the manufacturer’s instructions.

7. Do not install near any heat sources such as radiators, heat registers, stoves, or

other apparatus (including ampliﬁers) that produce heat.

8. Only use attachments/accessories speciﬁed by the manufacturer.

9. Refer all servicing to qualiﬁed service personnel. Servicing is required when the

device has been damaged in any way including:

»Damage to the power supply or power plug

»Exposure to rain or moisture

Power Supply Use:

You MUST use the Power Supply provided with your unit or you VOID the

Key Digital

Warranty and risk damage to your unit and associated

equipment.

How to Contact Key Digital

System Design Group (SDG)

For system design questions please contact us at:

➔

Phone: 914-667-9700

➔

E-mail: [email protected]

Customer Support

For customer support questions please contact us at:

➔

Phone: 914-667-9700

➔

E-mail: [email protected]

Technical Support

For technical questions about using Key Digital®products, please contact us at:

➔

Phone: 914-667-9700

➔

E-mail: [email protected]

Repairs and Warranty Service

Should your product require warranty service or repair, please obtain a Key Digital®

Return Material Authorization (RMA) number by contacting us at:

➔

Phone: 914-667-9700

➔

E-mail: r[email protected]

Feedback

Please email any comments/questions about the manual to:

➔

E-mail: [email protected]

Warranty

All Key Digital

products are built to high manufacturing standards and should

provide years of trouble-free operation. They are backed by a limited two-year parts

and labor warranty.

KD-CATHD500Pro_Manual.indd 10-11 5/13/13 9:20 AM

12 13

Installation Notes Installation Notes

KD-CATHD500Pro_Manual.indd 12-13 5/13/13 9:20 AM

Inhaltsverzeichnis

Andere Key Digital Extender Handbücher

Key Digital

Key Digital KD-CAT5XHDMI Bedienungsanleitung

Key Digital

Key Digital KD-X444L Bedienungsanleitung

Key Digital

Key Digital KD-XUSB2 Bedienungsanleitung

Key Digital

Key Digital KD-4KWHCEX Bedienungsanleitung

Key Digital

Key Digital Phantom KD-HD1X1ProK Bedienungsanleitung

Key Digital

Key Digital FATCAT Series Bedienungsanleitung

Key Digital

Key Digital KD-HDMIWPRX Bedienungsanleitung

Key Digital

Key Digital KD-HDDA1x1Pro Bedienungsanleitung

Key Digital

Key Digital KD-IP120TX Bedienungsanleitung

Key Digital

Key Digital KD-CAT5XHDMI Bedienungsanleitung

Key Digital

Key Digital Phantom KD-HDDA1X1 Bedienungsanleitung

Key Digital

Key Digital KD-CAT5XCAT5 Bedienungsanleitung

Key Digital

Key Digital KD-X222 Bedienungsanleitung

Key Digital

Key Digital KD-X444LP Bedienungsanleitung

Key Digital

Key Digital FatCAT KD-CATHD250Lite Bedienungsanleitung

Key Digital

Key Digital PRO Connect PCBKDCATHD Tx Bedienungsanleitung

Key Digital

Key Digital KD-HDB150 Bedienungsanleitung

Key Digital

Key Digital KD-FIX418 Bedienungsanleitung

Key Digital

Key Digital Smart Baluns KD-BBRX Bedienungsanleitung

Key Digital

Key Digital KD-PS22UTx Bedienungsanleitung

Key Digital

Key Digital KD-X422WP Bedienungsanleitung

Key Digital

Key Digital KD-X411ProK Bedienungsanleitung

Key Digital

Key Digital KD-X400POHK Bedienungsanleitung

Key Digital

Key Digital FatCAT KD-CATHD250POH Bedienungsanleitung

Beliebte Extender Handbücher anderer Marken

SY HDBT-60T Bedienungsanleitung

Appsys ProAudio

Appsys ProAudio ADX-16 Bedienungsanleitung

Atlona

Atlona RS232 Bedienungsanleitung

IDK

IDK OPF-TH1000-A Bedienungsanleitung

Enable-IT

Enable-IT 824WP Bedienungsanleitung

Worx

Worx Landroid RadioLink WA0864 Technisches Datenblatt

TP-Link

TP-Link TL-WA730RE Bedienungsanleitung

Camplex

Camplex CMX-HDMI-SFPL Bedienungsanleitung

SC&T

SC&T HE03-4K Bedienungsanleitung

Samsung

Samsung SCS-26UC4 Bedienungsanleitung

Foxun

Foxun SX-GES24 Bedienungsanleitung

MuxLab

MuxLab 500771 Bedienungsanleitung

foxunhd

foxunhd SX-AEX01 Bedienungsanleitung

TERK Technologies

TERK Technologies LFIRX2 Bedienungsanleitung

Devolo

Devolo Audio Extender Handbuch

Edimax

Edimax EW-7438RPn V2 Bedienungsanleitung

Shinybow USA

Shinybow USA SB-6335T5 Bedienungsanleitung

SECO-LARM

SECO-LARM ENFORCER EVT-PB1-V1TGQ Bedienungsanleitung