Kohler K-11810 Bedienungsanleitung

Installation Guide

Widespread Lavatory Faucets

Mproduct numbers are for Mexico (i.e. K-12345M)

Los números de productos seguidos de

Mcorresponden a México (Ej.

K-12345M)

Français, page“ Français-1”

Español, página“ Español-1”

K-11810, K-75851

114369-2-BB

Thank You For Choosing Kohler Company

We appreciate your commitment to Kohler quality. Please take a few

minutes to review this manual before you start installation. If you

encounter any installation or performance problems, please don’t

hesitate to contact us. Our phone numbers and website are listed on

the back cover. Thanks again for choosing Kohler Company.

Tools and Materials

Before You Begin

Observe all local plumbing and building codes.

Shut off the main water supply.

Carefully inspect the waste and supply tubing for any sign of

damage.

Replace waste or supply tubing if necessary.

Valve inlets accommodate 1/2″O.D. tubing for slip joint

connections.

For new installations, install the faucet before installing the

lavatory.

Kohler Co. reserves the right to make revisions in the design of

faucets without notice, as speciﬁed in the Price Book.

Adjustable

Wrench Hacksaw or

Tube Cutter Pipe Wrench

ScrewdriverThread

Sealant

Plumbers

Putty

114369-2-BB 2 Kohler Co.

1. Spout Installation

Assemble the washer onto the spout base.

Thread the channel and hex nut onto the stud. Secure the faucet

to the lavatory by tightening the hex nut with an adjustable or

open end wrench. Do not overtighten.

2. Valve Body Installation

Turn the locknuts down onto each valve body.

Insert the valve bodies from underneath ﬁxture so the valve

outlets face the spout.

Apply a bead of plumbers putty to the underside of the ﬂanges

according to the manufacturer’s instructions.

Hand tighten the ﬂanges.

Attach the hoses to the valve outlets and wrench tighten.

Tighten the locknuts.

Lavatory

Channel

Hex Nut

Stud

Tee Spout

Washer

Lavatory Tee

Stud

Apply

plumbers

putty.

Valve Inlet

Valve Body

Locknut

Flange

Hose

Valve Outlet

Kohler Co. 3 114369-2-BB

3. Handle Installation and Tee Connection

Handle Installation

Slip the handle over the valve and onto the ﬂange.

Secure the handle by threading the screw into the valve stem.

Press the plug button into place.

Repeat for the second handle.

Tee Connection

Attach the hoses to the spout tee outlets.

Tighten securely with an adjustable or open end wrench.

Plug Button

Screw

Valve Stem

Flange

Handle

Hose

Spout Tee

114369-2-BB 4 Kohler Co.

4. Drain Style

Refer to the illustrations above to determine the drain style you

received with your faucet.

Please follow the instructions for your drain style.

Style A Drain Style B Drain

Kohler Co. 5 114369-2-BB

5. Drain Installation-Style A

Remove the protective material from the ﬂange.

Wrap the bottom 2/3 of the ﬂange threads with three layers of

sealant tape.

Apply a ring of plumbers putty or other sealant to the underside

of the ﬂange according to the putty manufacturer’s instructions.

Insert the ﬂange into the ﬁxture drain hole.

Assemble the gasket (tapered side up) and washer to the ﬂange

and partially thread the nut to the ﬂange. Do not fully tighten the

nut at this time.

Install the body washer and drain body with the seal hole facing

the back of the ﬁxture and securely tighten the nut. Use care to

avoid scratching the ﬁnish.

Remove any excess putty or sealant.

Insert the stopper into the ﬂange.

Insert the seal into the seal hole on the body.

Seal

Stopper

Lavatory

Screw

Spring

Clip Gasket

NutNut

Link

Rod Seal

Flange

Apply plumbers

putty.

Apply 3 layers of

sealant tape to

bottom 2/3.

Washer

Body Washer

Drain Body

114369-2-BB 6 Kohler Co.

6. Complete Drain Installation-Style A

For regular installations, insert the short end of the rod into the

body seal hole and under the stopper. For vandal-resistant

installations, ﬁt the rod through the hole in the stopper. Secure

with the body nut.

Remove and adjust the stopper so it lifts about 3/8″(1 cm) when

opened. To adjust, loosen the stopper nut and shorten or lengthen

the stopper as needed. Tighten the stopper nut.

Apply three layers of thread tape and a small bead of pipe

sealant to the tailpiece threads.

Thread the tailpiece to the body and tighten securely.

Slide one end of the clip onto the rod. Slide the link onto the rod

with the thumbscrew facing the back of the ﬁxture.

Squeeze the other end of the clip, aligning the hole with the rod.

Move the link to the proper position by squeezing the clip and

sliding it along the rod.

Insert the lift rod into the hole in the faucet and then into the

hole in the link.

Tighten the thumbscrew onto the link so the lift rod knob extends

above the lift rod hole.

Body Nut

Stopper

Body

Tailpiece

Seal

Seal Hole

Rod

Apply 3 layers of

sealant tape and a

small bead of pipe

sealant to threads.

Stopper

Nut

Faucet

Rod

Clip

Thumb

Screw

Link

Kohler Co. 7 114369-2-BB

7. Drain Installation-Style B

Remove the protective cover from the ﬂange.

Apply a ring of plumbers putty or other sealant to the underside

of the ﬂange according to the putty manufacturer’s instructions.

Assemble the nut, ﬂat washer, and tapered gasket (tapered side

up) fully onto the body.

From the underside of the ﬁxture, insert the drain body up into

the drain hole.

From the top of the ﬁxture, securely hand tighten the ﬂange onto

the drain body.

Make sure the drain body seal hole is facing the back of the

ﬁxture, and securely tighten the nut.

Remove any excess putty or sealant.

Apply plumbers putty.

Flange

Gasket

Washer

Nut

Drain Body

Fixture

114369-2-BB 8 Kohler Co.

8. Complete Drain Installation-Style B

Press the seal into the seal hole on the body.

Insert the stopper into the ﬂange.

For regular installations, insert the short end of the rod into the

body seal hole and under the stopper. For vandal-resistant

installations, ﬁt the rod through the hole in the stopper. Hand

tighten the body nut.

Remove and adjust the stopper as needed so it lifts about 3/8″(1

cm) when opened. To adjust, rotate the threaded stopper rod in or

out as needed. Retighten the stopper nut.

Apply thread sealant tape to the tailpiece threads, and thread the

tailpiece to the body. Tighten the tailpiece securely.

Slide one end of the clip onto the rod. Slide the link onto the rod

with the thumbscrew facing the back of the ﬁxture.

Squeeze the other end of the clip, aligning the hole with the rod.

Move the link to the proper position by squeezing the clip and

sliding it along the rod.

Insert the lift rod into the hole in the faucet and then into the

hole in the link.

Tighten the thumbscrew onto the link so the lift rod knob extends

1/2″(1.3 cm) above the lift rod hole.

Body

Rod

Clip

Stopper

Nut

Flange

Seal

Nut

Tailpiece

Apply

thread

sealant.

Thumb

Screw

Stopper Rod

Link

Kohler Co. 9 114369-2-BB

9. Supply Connections

Install the lavatory using the lavatory manufacturer’s instructions.

Connect the supply tubes to the handle valves, and the supply

stops. Left is hot and right is cold.

Tighten all connections.

Compression

Union

Cold

Nut

114369-2-BB 10 Kohler Co.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Kohler Sanitärprodukte Handbücher

Kohler

Kohler 23510-BL Bedienungsanleitung

Kohler

Kohler K-10958 Bedienungsanleitung

Kohler

Kohler 20214T Bedienungsanleitung

Kohler

Kohler K-2600 Bedienungsanleitung

Kohler

Kohler ARCHER 800 K-99918T Bedienungsanleitung

Kohler

Kohler Margaux 16228A Bedienungsanleitung

Kohler

Kohler K-10085 Montageanleitung

Kohler

Kohler 99721T-4 Bedienungsanleitung

Kohler

Kohler Triton K-T7019 Bedienungsanleitung

Kohler

Kohler RUBICON 20147T-4 Bedienungsanleitung

Kohler

Kohler K-2746X Montageanleitung

Kohler

Kohler K-9486 Bedienungsanleitung

Kohler

Kohler K-15182 Bedienungsanleitung

Kohler

Kohler k-10950 Betriebsanleitung

Kohler

Kohler K-412 Montageanleitung

Kohler

Kohler K-116 Bedienungsanleitung

Kohler

Kohler K-13462 Bedienungsanleitung

Kohler

Kohler Pillows K-7943 Bedienungsanleitung

Kohler

Kohler K-7653 Montageanleitung

Kohler

Kohler K-6227 Montageanleitung

Kohler

Kohler K-5026 Montageanleitung

Kohler

Kohler 1007966 Handbuch

Kohler

Kohler K-7659 Bedienungsanleitung

Kohler

Kohler MINIMA K-45803T-L-SHP Bedienungsanleitung

Beliebte Sanitärprodukte Handbücher anderer Marken

Weka

Weka 506.2020.00E Betriebsanleitung

American Standard

American Standard DetectLink 6072121 Bedienungsanleitung

Uponor

Uponor Contec TS Bedienungsanleitung

Pfister

Pfister Selia 49-SL Bedienungsanleitung

Fortis

Fortis VITRINA 6068700 Bedienungsanleitung

Maxxus

Maxxus MX-M206-01 Bedienungsanleitung

Viega

Viega Prevista Pure 8512 Bedienungsanleitung

Viega

Viega Prevista Dry 8522.33 Bedienungsanleitung

Sanela

Sanela Lema SLP 59RB Bedienungsanleitung

Elkay

Elkay EDF15AC Installationshandbuch

Hans Grohe

Hans Grohe AXOR Citterio E 36702000 Handbuch

baliv

baliv WT-140 Bedienungsanleitung

BELLOSTA

BELLOSTA romina 0308/CC Bedienungsanleitung

Bristan

Bristan PS2 BAS C D2 Verdrahtungsschema

Crosswater

Crosswater Heir 18-31 Bedienungsanleitung

Sanela

Sanela SLVN 07 Bedienungsanleitung

Glacier bay

Glacier bay DORIND HD67478W-6001 Montageanleitung

Sterling Plumbing

Sterling Plumbing C741 Bedienungsanleitung