Kohler K-4107T Bedienungsanleitung

上海科勒电子科技有限公司

上海市浦东新区金滇路18号E幢邮编：201206

Installation Guide

安装说明

K-4107T

C3Toilet Seat with Bidet Functionality

C3清舒宝智能座便盖

English page 1-8

中文页码9-14

한글 페이지 15-21

繁　體　頁　碼 22-27

1194357-T01-B

on the product surface. Please ensure sufficient ventilation in your

surroundings to prevent possible damage to electronic components.

10A

1194357-T01-B

Kohler Co.

Unplug the seat and drain it, if the seat is not being used for an

extended period of time.

Make sure the seat is positioned correctly so that it can be connected to

the thread of the inlet pipe. Otherwise, the inlet pipe thread may wear off

and lead to water leakage.

Kohler Co.

1194357-T01-B

1. Match toilet roughing-in requirements and installation tips

220-240V AC

2. Install an Electrical Outlet

It is recommended to use water-resistant socket. Do not use an

extension cord with the product.

WARNING: Risk of electric shock, fire, or personal injury.

This product must be grounded. Connect only to a dedicated

220~240V AC, 50/60Hz, 10A circuit protected by Ground-Fault

Circuit-Interrupter (GFCI) or Earth-Leakage Circuit-Breaker (ELCB).

NOTE: Follow local codes when determining the electrical outlet location.

Route the electrical and install to a 220-240V GFCI- or ELCB-protected

receptacle.

3. Preparation

Turn off the water supply to the toilet.

Flush the toilet to relieve any pressure from the water supply hoses.

Position a container under the fill valve to catch any excess water.

Disconnect the water supply hose from the toilet fill valve.

Remove the existing toilet seat.

1. Distance between installation holes: 136 - 210mm.

2. Distance between installation holes and tank front rim:>20mm.

3. Distance between installation holes and bowl inner rim: ＜70mm.

4. Distance between installation holes and tank top rim: 460 - 490mm.

5. Bowl inner diameter: 370 - 390mm.

6. The distance between the seat and the plug should be maximum 1 meter.

1194357-T01-B

Kohler Co.

Mounting Plate

Nut

4. Install the Mounting Plate

For All Other Installations:

Position the mounting plate over the toilet mounting holes.

Slide a washer onto each of the bolts. Please pay attention to washer

direction.

Insert a bolt through the mounting plate and the toilet mounting holes.

Position the washers so they rest in the grooves of the mounting plate.

Thread a nut onto each of the bolts. Handtighten the nut.

For Toilets with Threaded Inserts:

Insert a bolt through the mounting plate and position the washers so they

rest in the grooves of the mounting plates. Please pay attention to washer

direction.

Loosely thread the bolts into the inserts. Do not overtighten for further

adjustment.

NOTE: Select the appropriate mounting plate according to the instruction for

mounting distance on the mounting plate.

Place the mounting plate in the mounting hole above the toilet.

Screws should be inserted respectively into the washers.

NOTE: Some toilets come with threaded inserts pre-installed in the mounting

holes. For toilets with threaded inserts, the nut is not required.

Mounting Plate

Kohler Co.

1194357-T01-B

Mounting Plate

5. Install the Seat

For All Other Installations:

No need to remove the seat for seat position adjustment. Adjust the position

seat and mounting plate only by loosening nuts and tighten nuts when they

are adjusted to properly align with the seat.

Align the slot on the mounting plate with the groove located below the toilet

seat, slide the seat onto the mounting plate until you feel it snapsinto place.

To adjust the seat position, remove the seat and reposition the mounting

plate as needed.

Once the seat is positioned as desired, remove the seat and securely tighten

down the mounting plate.

Reinstall the seat.

NOTE: The mounting plate may need to be adjusted to properly align with the

seat.

For Toilets with Threaded Inserts:

1194357-T01-B

Kohler Co.

6. Connect the Water Supply

Connect the T-valve directly to the toilet fill valve.

NOTE! For those newly installed plumbing pipes, (before the inlet hose is

connected to the T-valve,) must flush for several seconds to clean the inner

side of the pipe in order to remove the dirt and debris, etc.

Connect the T-valve to the toilet seat with the supplied hose.

NOTE：Please do not reuse the old hose.

Connect the water supply to the T-valve.

Turn on the water supply.

NOTE：Flush the water supply pipes thoroughly to remove debris. The

product is designed for tap water. Make sure not to use industrial water/grey

water/black water/sea water for the water supply.

Check all connections for leaks and make any adjustments as

needed.

IMPORTANT! Risk of product damage. Take care to face right in position to

the inlet pipe thread and seat thread. Take care not to crossthread or overtighten

connections. Hand tighten plus one-quarter turn is sufficient for tightening.

IMPORTANT! Risk of product damage. Use care not to scratch the product

surfaces.

T-Valve

Inlet Hose

Supply Stop Hose

Kohler Co.

1194357-T01-B

7. Installation Checkout

Wrap the toilet seat with plastic wrap to prevent water from spraying

from the toilet during testing.

Toilet makes one short beep once it is plugged in. The nozzle

stretches out and draws back once. Backlight on the side keyboard

lights up and the night light flashes. All the actions last until the

initialization process completes.

Attach the clips evenly along the hose and power cord.

The seat is activated by skin-to-seat contact. Unless otherwise

stated, the seat must be occupied to activate the functions. To

activate the seat controls for testing purposes, when facing the toilet,

place your hand or a damp wash cloth on the right side of the seat

approximately 1/3 from the front of the seat (sensor area).

Proceed to the “Operation” section of the Homeowners Guide to test

the various seat functions.

1194357-T01-B

Kohler Co.

谢谢您选择科勒公司

工具和材料

安装之前

我们感谢您对科勒质量的信任。在您开始安装前，请您花几分钟时间阅读

这本手册。如果您在安装或性能方面遇到任何问题，务必请您与我们联

系。再次感谢您选择科勒公司。

可调节扳手一字螺丝刀

警告：触电，火灾或人身伤害的危险。本产品必须接地良好。

只能连接到专用的220-240V AC，50/60Hz，10A的带接地故

障断路器或接地漏电保护器的电路中。

警告：触电或产品损伤的危险。不要把产品浸没在水中。

重要！产品损伤的危险。

在所有其他安装步骤结束之前不要插电源线插头。

重要！产品损伤的危险。

不要把产品安装在水可能溅到的地方。

重要！产品损伤的危险。

不要把产品安装在过分潮湿的地方，在这种地方，

水汽可能凝聚在产品表面。请始终保持使用环境有足够的通风，以防止电子

组件的损坏。

重要！产品损坏或财产损失的危险。硬推、硬拉水管接头可能造成水渗

漏。

重要！产品损坏的危险。不要在喷嘴上施加过大的力，否则产品可能损

坏。

重要！产品损坏的危险。

连接本产品进水管时要小心对正螺纹，否则会损坏

产品进水口螺纹，造成漏水。

遵守所有当地的管道和建筑标准。

这本说明中所有的信息基于最新公开的产品信息。科勒公司保留在

任何时间不通知的情况下做改变的权利。

不要使用延长电线连接产品。

连接到流动水压在0.7kgf/cm2~7.5kgf/cm2(0.07MPa~0.74MPa)的冷水源。

只能连接到自来水的水源。

如果产品长时间不用，请拔下插头并排干本机里的水。

Kohler Co.

1194357-T01-B

1. 安装孔的间距：136-210mm

2. 安装孔与水箱的距离:＞20mm

3. 安装孔与座便器内圈的距离:＜70mm

4.安装孔到座便器顶端的距离：460-490mm

5. 座便器内径尺寸：370-390mm

1.适配座便盖尺寸要求及安装小贴示

2.安装电路出口

6.安装前请在座便器

左侧约1米范围内预留

电源插座

警告：触电，火灾或人身伤害的危险。本产品必

须接地良好。只能连接到专用的220-240V AC，

50/60Hz，10A的带接地故障断路器或接地漏电保

护器的电路中。

建议使用防水型插座，不要使用延长电线连接产品。

注意：在决定电路出口位置时，要按照当地的标准。

连接到220-240V并带有接地故障断路器或接地漏电保护器保护的电路

中。

3. 准备

220-240V AC

关闭座便器的供水系统。

冲洗座便器，释放来自供水管的压力。

在进水阀下方放置一个容器装多余的水。

断开座便器进水阀与供水管的连接。

移除现有的座圈。

1194357-T01-B

Kohler Co.

Inhaltsverzeichnis

Sprachen:

Andere Kohler Sanitärprodukte Handbücher

Kohler

Kohler K-9511 Bedienungsanleitung

Kohler

Kohler K-702200 Bedienungsanleitung

Kohler

Kohler K-8549 Bedienungsanleitung

Kohler

Kohler PATIO ECO K-18645T-Y Bedienungsanleitung

Kohler

Kohler K-2958 Montageanleitung

Kohler

Kohler K-T10594 Montageanleitung

Kohler

Kohler K-3593 Bedienungsanleitung

Kohler

Kohler C3-150 Montageanleitung

Kohler

Kohler K-15003 Bedienungsanleitung

Kohler

Kohler K-7323 Bedienungsanleitung

Kohler

Kohler K-7344 Montageanleitung

Kohler

Kohler 114753-2-CD Bedienungsanleitung

Kohler

Kohler K-7128 Montageanleitung

Kohler

Kohler 1071003-2-B Bedienungsanleitung

Kohler

Kohler k-2815 Bedienungsanleitung

Kohler

Kohler Mira Sport J03A Bedienungsanleitung

Kohler

Kohler Refinia K-T5324 Montageanleitung

Kohler

Kohler K-444 Montageanleitung

Kohler

Kohler Mira Move 8.5 Bedienungsanleitung

Kohler

Kohler TOUCHLESS 32323T-4 Bedienungsanleitung

Kohler

Kohler Coralais K-15177 Montageanleitung

Kohler

Kohler K-T16236 Bedienungsanleitung

Kohler

Kohler K-169 Bedienungsanleitung

Kohler

Kohler K-8998 Montageanleitung

Beliebte Sanitärprodukte Handbücher anderer Marken

Weka

Weka 506.2020.00E Betriebsanleitung

American Standard

American Standard DetectLink 6072121 Bedienungsanleitung

Uponor

Uponor Contec TS Bedienungsanleitung

Pfister

Pfister Selia 49-SL Bedienungsanleitung

Fortis

Fortis VITRINA 6068700 Bedienungsanleitung

Maxxus

Maxxus MX-M206-01 Bedienungsanleitung

Viega

Viega Prevista Pure 8512 Bedienungsanleitung

Viega

Viega Prevista Dry 8522.33 Bedienungsanleitung

Sanela

Sanela Lema SLP 59RB Bedienungsanleitung

Elkay

Elkay EDF15AC Installationshandbuch

Hans Grohe

Hans Grohe AXOR Citterio E 36702000 Handbuch

baliv

baliv WT-140 Bedienungsanleitung

BELLOSTA

BELLOSTA romina 0308/CC Bedienungsanleitung

Bristan

Bristan PS2 BAS C D2 Verdrahtungsschema

Crosswater

Crosswater Heir 18-31 Bedienungsanleitung

Sanela

Sanela SLVN 07 Bedienungsanleitung

Glacier bay

Glacier bay DORIND HD67478W-6001 Montageanleitung

Sterling Plumbing

Sterling Plumbing C741 Bedienungsanleitung