Kohler Mira Move 8.5 Bedienungsanleitung

These instructions must be left with the user

Installation and User Guide

Mira Move

8.5, 9.5, & 10.8 kW

For SPARES, ADVICE

or REPAIRS

Please call us on

0844 571 5000

(UK Only)

Product Model Number Colour

Move 8.5 J96Vc

J96Vd

White/Chrome

Satin Chrome

Move 9.5 J96Wc

J96Wd

White/Chrome

Satin Chrome

Move 10.8 J96Xb White/Chrome

Patent: GB: 2 427 460

Patent Application: Ireland: 2006/0462

Patents

If you experience any difculty with the installation of your new shower, then please

refer to “Fault Diagnosis”, before contacting Kohler Mira Limited. Our telephone

and fax numbers can be found on the back cover of this guide.

INTRODUCTION

Thank you for purchasing a quality Mira Move Electric Shower. To enjoy the full

potential of your new shower, please take time to read this guide thoroughly, and

keep it handy for future reference.

Products manufactured by Kohler Mira Ltd are designed to be safe provided, that

they are installed used and maintained in good working order, in accordance with

our instructions and recommendations.

Follow all warnings, cautions and instructions contained in this guide, and on or

inside the shower.

Mira Move electric showers have separate controls for power selection and for

temperature/ow adjustment. A unique ow regulator stabilises any temperature

changes caused by water pressure uctuations, which can result from taps being

turned on or off or toilets being ushed.

When this shower has reached the end of its serviceable life, it should be disposed

of in a safe manner, in accordance with current local authority recycling, or waste

disposal policy.

Mira Move models covered by this guide:

Guarantee

The Mira Move has been designed for domestic use only, Mira Showers guarantee

the Mira Move against any defect in materials or workmanship for a period of two

years from the date of purchase (shower ttings for one year).

For terms and conditions, refer to the back cover of this guide.

IMPORTANT SAFETY INFORMATION

WARNING - This shower can deliver scalding temperatures if not operated,

installed or maintained in accordance with the instructions, warnings and

cautions contained in this guide and on or inside the appliance.

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR INJURY:

1. Installation of this shower must be carried out in accordance with these

instructions by qualied, competent personnel.

2. Isolate the electrical and water supplies before commencing installation. The

electricity must be isolated at the consumer unit and the appropriate circuit

fuse removed, if applicable. Mains connections are exposed when the cover

is removed.

3. DO NOT install the shower in areas with high humidity and temperature

(i.e. steam rooms and saunas).

4. DO NOT install the shower where it may be exposed to freezing conditions.

Ensure that any pipework that could become frozen is properly insulated.

5. DO NOT switch the shower on if there is a possibility that the water in the

shower is frozen.

6. DO NOT switch the shower on if water starts leaking from the shower case.

Isolate the electrical supply to the shower immediately.

7. DO NOT connect the outlet of the shower to any tap, control valve, trigger

handset or showerhead other than those specied for use with this shower.

Only Kohler Mira recommended accessories should be used.

8. The water supplies to this product must be isolated if the product is not to be

used for a long period of time. If the product or pipework is at risk of freezing

during this period they should also be drained of water.

9. DO NOT perform any unspecied modications to the shower or its

accessories. When servicing only use genuine Kohler Mira replacement

parts.

10. If the shower is dismantled during installation or servicing then upon completion

the product must be inspected to ensure all electrical connections are tight and

that there are no leaks.

11. Read all installation instructions before installing this shower.

12. Upon completion of the installation, make sure that the user is familiar with the

operation of the shower, and leave this guide and the user guide with the owner.

PACK CONTENTS

Documentation

Tick the appropriate boxes to familiarise yourself with the part names and to

conrm that the parts are included.

1 x Installation Guide

1 x Guarantee Brochure

1 x Installation Template

1 x Insert RH

1 x Insert LH

1 x Blank Insert

1 x Mira Move Electric Shower

WIRING DIAGRAM

BROWN B

BLACK C

BROWN E

BROWN L

GREEN F

BLACK C

BLACK G

BROWN I

RED H

MICROSWITCH (L) MICROSWITCH (R)

GREEN N

BROWN E

BLUE A

BLUE A BLUE D

POWER NEON

TANK

GREEN F

BROWN B

GREEN N

DOUBLE CONNECTOR

SINGLE CONNECTOR (L) SINGLE CONNECTOR (R)

SOLENOID VALVE

LATCHING SWITCH

BLACK DBLUE D

SPECIFICATIONS

Plumbing Variant

Move 8.5 Move 9.5 Move 10.8

Minimum Dynamic Pressure 70 kPa

(0.7 bar)

70 kPa

(0.7 bar)

100 kPa

(1.0 bar)

Maximum Dynamic Pressure* 500 kPa (5 bar)

Maximum Static Pressure 1000 kPa (10 bar)

Minimum Static Pressure 50 kPa (0.5 bar)

Maximum Inlet Temperature 30°C

Minimum Inlet Temperature 2°C

Inlet Connection 1/2” BSP Male / 15 mm Compression Fitting

Maximum Water Hardness 200 ppm CaCO3

Outlet Connection 1/2” BSP Male

Electrical Variant

Move 8.5 Move 9.5 Move 10.8

Nominal Power at 230 V ac 7.8 kW 8.7 kW 9.9 kW

Nominal Power at 240 V ac 8.5 kW 9.5 kW 10.8 kW

Recommended MCB Rating 40 A 40 A 45 A

Maximum Supply Cable Size 16 mm²

Recommended RCD Rating 30 mA tripping current

Recommended Isolator Switch 45 A double-pole with 3 mm contact separation

Appliance Sealing Rating IP X4 - Suitable for installation in Zone 1

Maximum Ambient Temperature 30°C

Minimum Ambient Temperature 2°C

Dimensions

Height 340 mm

Width 228 mm

Depth 93 mm

European Conformity Information

The Mira Move range of showers complies with the following European directives:

2006/95/EC Low Voltage Directive, 2004/108/EC EMC Directive.

The Mira Move range of showers are high power appliances and are subject to conditional connection.

If the main electrical supply fuse is rated less than 80 Amps, the local electricity supply company must

be contacted to conrm if the electrical supply is adequate.

The Mira Move range of showers complies with the requirements of the UK’s water regulations.

*A drop tight pressure reducing valve should be installed where dynamic or static pressure exceeds the

gure stated in the Specications.

INSTALLATION REQUIREMENTS

Please read the Important Safety Information and specications sections at

the front of this guide, and the requirements detailed in this section before

installing the shower.

WARNING - TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR INJURY:

Plumbing

1. The plumbing installation must comply with all national or local water regulations

and all relevant building regulations, or any particular regulation or practice

specied by the local water supply company.

2. Do not install the product in a position in which service access is limited.

3. Decide on a suitable position for the shower (minimum distance of 200 mm from

the ceiling to allow for cover t and removal).

4. The position of the shower and shower ttings must provide a minimum gap of

25 mm between the showerhead and the spill over level of any bath, shower

tray or basin and a minimum gap of 30 mm between the showerhead and the

spill over level of any toilet, bidet or other appliance with a Fluid Category 5

backow risk (see diagram on page 8).

5. The shower is suitable for installation within the shower area and is tted with

a pressure relief valve. It must be positioned over a water catchment area with

the controls at a convenient height for the user.

6. The shower must be tted to a waterproof at and even wall surface.

7. DO NOT t the shower to the wall and tile up to the case.

8. DO NOT seal the gap between the shower and the wall surface.

9. The showerhead should be positioned so that it discharges down the centre

line of the bath or across the opening of a shower cubicle.

10. The showerhead must be directed away from the shower unit, during normal

use the showerhead must not spray directly on to the shower unit.

11. DO NOT apply excessive force to plumbing connections; always provide

mechanical support when making plumbing connections. Any soldered joints

should be made before connecting the shower.

12. This shower is not designed to be plumbed directly from the rear. For rear-entry

supply, add an elbow to the supply pipe and connect as a rising or a falling supply.

13. If pipework and/or electrical cables enter the shower from the rear through a

hole in the wall provision must be made to prevent water ingress back into the

wall structure.

14. Only use the inlet connector supplied with the shower. DO NOT use any other

type of tting.

Hose Retaining Ring tted and shower ttings xed at a suitable height preventing

dirty water backow.

Zone of

Backow Risk

30 mm

Minimum

Toilet or Bidet

FC5

Hand Basin

FC3

Bath or Shower

Tray FC3

Electric

Shower

25 mm

Minimum

25 mm Minimum

Note! There will be occasions when the hose retaining ring will not provide a suitable

solution for Fluid Category 3 installations, in these instances an outlet double

checkvalve must be tted, this will increase the required supply pressure typically by

10kPa (0.1 bar). Double checkvalves tted in the inlet supply to the appliance cause

a pressure build up, which affect the maximum static inlet pressure for the appliance

and must not be tted. For Fluid category 5 double checkvalves are not suitable.

15. A full bore/non restrictive servicing valve must be tted in a readily accessible

position adjacent to the shower to facilitate maintenance of the shower.

DO NOT use a valve with a loose washer plate (jumper) as this can lead to a

build up of static pressure.

16. A water treatment device should be installed where the water hardness may

exceed 200 ppm. Malfunctions caused by excessive limescale formation are

not covered by this shower’s guarantee (see back page for details).

17. The installation must not cause the hose to be sharply kinked during normal

use.

18. DO NOT perform the electrical installation until the plumbing has been completed

and checked for leaks.

Plumbing and Electrical Schematic

WARNING - TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR INJURY:

Electrical

1. The electrical installation must comply with BS 7671 (commonly referred to as

the IEE Wiring Regulations) and all relevant building regulations, or any particular

regulation or practice specied by the local electricity supply company.

2. Ensure that all circuit protection devices, switches and cabling is adequate

for the rated current of the shower and that the rating of the electricity supply

company fuse and the consumer unit are adequate for the additional demand.

3. The shower must be earthed. Ensure any supplementary bonding complies

with the relevant regulations.

4. This shower is intended to be permanently connected to the xed electrical wiring

of the mains system. A separate supply must be provided from the consumer

unit to the shower.

5. DO NOT supply any other electrical equipment including extractor fans or pumps

via this product.

6. This shower must be provided with means for local disconnection that is

incorporated into the xed wiring in accordance with the relevant local wiring

regulations. This must be a double pole switch, which has at least 3 mm contact

separation in each pole. The switch can be a ceiling mounted pull-cord type within

the shower room or a wall mounted switch tted in the applicable zone area.

7. A 30mA Residual Current Device (RCD) is recommended to be incorporated

into the electrical supply to this shower in accordance with wiring regulations.

8. DO NOT apply excessive force to the terminal block.

9. All electrical connections should be checked for tightness to prevent overheating

before switching on the electrical supply.

10. DO NOT switch on the electrical supply until the plumbing has been completed

and checked for leaks.

INSTALLATION

Check the existing installation is positioned according to the dimensions specied in

the diagram above. The Mira Move shower can replace showers of the approximate

shape and size of those shown.

212 mm

170 mm

40 mm

45 mm

Inlet Water

Supply

Inlet Water

Supply

309 mm

220 mm

150 mm

300 mm

Terminal Block

50 mm 55 mm

170 mm

Replacing an Existing Shower

Electrical - Terminal Block locations are provided on both the left and right for

convenience when replacing a shower. Note! By default the electrical supply position

is set for left hand entry, if the installation favours right hand entry some adjustment

of the terminal block in the case will be required. Go to "Adjustment for right hand

electrical supplies"

Left Side

(Default)

Right Side

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Kohler Sanitärprodukte Handbücher

Kohler

Kohler K-T10302 Bedienungsanleitung

Kohler

Kohler K-19950 Montageanleitung

Kohler

Kohler K-11608 Bedienungsanleitung

Kohler

Kohler K-138 Bedienungsanleitung

Kohler

Kohler 10089W-CP Bedienungsanleitung

Kohler

Kohler K-14434 Bedienungsanleitung

Kohler

Kohler K-368 Bedienungsanleitung

Kohler

Kohler Discovery Bedienungsanleitung

Kohler

Kohler K-3099 Montageanleitung

Kohler

Kohler K-45415 Montageanleitung

Kohler

Kohler K-T944 Montageanleitung

Kohler

Kohler Vessels Bedienungsanleitung

Kohler

Kohler PARALLEL K-31139T-4-BL Bedienungsanleitung

Kohler

Kohler K-7653 Bedienungsanleitung

Kohler

Kohler K-11550 Montageanleitung

Kohler

Kohler MARSTON K-2766 Bedienungsanleitung

Kohler

Kohler K-6812 Bedienungsanleitung

Kohler

Kohler K-10430 Bedienungsanleitung

Kohler

Kohler K-11842 Series Montageanleitung

Kohler

Kohler K-7145 Montageanleitung

Kohler

Kohler K-T9540 Montageanleitung

Kohler

Kohler ESCALE Bedienungsanleitung

Kohler

Kohler K-10268 Bedienungsanleitung

Kohler

Kohler K-7344 Bedienungsanleitung

Beliebte Sanitärprodukte Handbücher anderer Marken

Weka

Weka 506.2020.00E Betriebsanleitung

American Standard

American Standard DetectLink 6072121 Bedienungsanleitung

Uponor

Uponor Contec TS Bedienungsanleitung

Pfister

Pfister Selia 49-SL Bedienungsanleitung

Fortis

Fortis VITRINA 6068700 Bedienungsanleitung

Maxxus

Maxxus MX-M206-01 Bedienungsanleitung

Viega

Viega Prevista Pure 8512 Bedienungsanleitung

Viega

Viega Prevista Dry 8522.33 Bedienungsanleitung

Sanela

Sanela Lema SLP 59RB Bedienungsanleitung

Elkay

Elkay EDF15AC Installationshandbuch

Hans Grohe

Hans Grohe AXOR Citterio E 36702000 Handbuch

baliv

baliv WT-140 Bedienungsanleitung

BELLOSTA

BELLOSTA romina 0308/CC Bedienungsanleitung

Bristan

Bristan PS2 BAS C D2 Verdrahtungsschema

Crosswater

Crosswater Heir 18-31 Bedienungsanleitung

Sanela

Sanela SLVN 07 Bedienungsanleitung

Glacier bay

Glacier bay DORIND HD67478W-6001 Montageanleitung

Sterling Plumbing

Sterling Plumbing C741 Bedienungsanleitung