Kohler Rada Intelligent Care MX1 Series Bedienungsanleitung

11367864-W2-C

Please leave these instructions with the user

Installation Guide

Intelligent Care

MX1 Wall Mounted Tap

1367864-W2-C

31367864-W2-C

General

Shut o󰀨 the main water and electrical supply.

Observe all local plumbing and building codes.

The Rada MX1 is a type 1, electronic, electrically operated, independently mounted valve. It is

intended for surface mounting and is for connection to the mains water supply.

Isolator / Check valve / Filter housing supplied is an integral component of the tap, failing to

install will invalidate the product’s warranty.

The Rada MX1 must only be supplied from the power adaptor provided.

The power adaptor must be connected to the xed wiring of the electrical supply via a switched

3A fused spur.

If the power adaptor supply cord is damaged the power adapter must be replaced by a

competent person.

The Rada MX1 has been certied for use in UK Healthcare premises as a TMV3 approved valve,

the approved designations of use are HP-WE.

For Healthcare installations refer to the TMV3 Requirements Manual which is available to view

or download from our website www.radacontrols.com.

Where chlorine disinfection is practised, DO NOT exceed a chlorine concentration of 50 mg/l (ppm)

in water, per one hour dwell time. Such procedures must be conducted strictly in accordance

with the information supplied with the disinfectant and with all relevant Guidelines/Approved

Codes of Practice.

The use of the word ‘failsafe’ to describe the function of any thermostatic mixing valve is both

incorrect and misleading. In keeping with every other mechanism it cannot be considered as

being functionally infallible.

Malfunction of thermostatic mixing valves can be detected by the use of proper temperature

checking and maintenance routines.

Certain types of system can result in the thermostatic mixing valve having excessive ‘dead-legs’

of pipework. Such systems can disguise the onset of thermostatic mixing valve malfunction.

Ultimately, the user must exercise due diligence to ensure that the delivery of warm water is at

a stable, safe temperature.

Make sure that the water delivery does not cause splashing or overow.

Important Safety Information

Make sure that the Rada MX1 is installed by a competent installer.

The product commissioning, clock (date/time) and tap set up can only be done in conjunction

with the “RADA AP1” available from the Apple APP store. Time and date setting is critical to

ensure data reporting is correct.

Note: Clock settings are lost after a period of 24hrs without mains power. When power is

restored clock settings return to factory default (1st February 2000) and will need to be

reset via the APP.

1367864-W2-C

Electrical PSU Valve

Supply Voltage 100 - 240 V 50/60 Hz 12 V DC

Rated Input Current 1 A 2.0 A

Water Ingress Protection IP X4 IP X4

Protection Against Electric Shock Class II (double insulated) Class III (SELV)

Pollution Degree 2 2

Rated Impulse Voltage 2.5 kV 18 V

Performance

Factory pre-set temperature 39°C

Factory pre-set temperature range 37°C - 41°C

Programmable temperature range 33°C - 45°C (Full cold can be selected during

programming)

General PSU Valve

Maximum Ambient Temperature 50°C 40°C

Minimum Ambient Temperature 1°C 1°C

Maximum Humidity 95% rH 95% rH

Water Supply

Water connections 15 mm Compression or 1/2” BSP

Minimum dynamic pressure 100 kPa (1.0 bar)

Maximum dynamic pressure 500 kPa (5.0 bar)

Maximum static pressure 1000 kPa (10.0 bar)

Supply pressure di󰀨erential Equal pressure recommended - inlet pressures

must be stable for optimum performance.

Minimum recommended di󰀨erential

between hot supply and outlet temp

(consistent with HSE Guidelines)

7°C

Hot supply temp 55°C - 65°C (60°C - 65°C Recommended)

Cold supply temp 1°C - 25°C

Maximum disinfection temperature 80°C

Duty Cycle 80% @ 40°C

For Type 3 installations, the supply conditions specied in the TMV3 Requirements manual take

precedence over the operating parameters which follow.

Specication

51367864-W2-C

Factory Default Settings

RADA App Tile / Section Adjustable

Temperature

Varient

Fixed

Temperature

Varient

Range

Units

Min Value Max Value

1. Valve Setup / 4. Installation Setup

1. Setup Advice Info Field

2. Valve Identity Editable Text Field

3. Outlet Type and Sub Type Info Field

4. Unit Address 17 17 1 31

5. Valve Date and Time 24 Hr Clock DD/MM/YYYY

6. Last Service and Time Info Field

7. Flow Calibration

8. Minimum Flow Limit 551100

9. Maximum Flow Limit 13 13 1 100

10. Valve DOB Info Field

11. Calibration N/A Set to max 300, 300

12. IR Calibration Factory Programmed - typical Range 180 - 220

13. Pin 0001 - 9999 Permisable. Re-entry of 5945 Not Permitted

14. Tap Interface Info Field

15. Operational State Enable Enable Enable, Disable

16. Tasks Apply Changes to Valve / Undo Changes

1. Valve Setup / 5. Outlet Setup

1. Type Info Field

2. Sub Type On/O󰀨 On/O󰀨 (On/O󰀨), Timed

Blocking N/A

3. Outlet Selection Info Field

4. Full Cold Mode Disabled Disabled

Start Cold

Enabled

Disabled

Start Cold

Enabled

Disabled

5. Minimum Temperature 37 N/A 33 45 0.5 deg C

6. Default Temperature 39 38 33 45

7. Maximum Temperature 41 N/A 33 45 0.5 deg C

8. Flow Rate Setup N/A

9. Default Flow Rate 50 50 10 100 %

10. Outlet Timeout 5 Min 5 Min 0s 30 Min Seconds / min

11. Run on Time 5 S 5 S 160 Seconds

12. Temperature Memory 40 S N/A 0 5 Min Seconds / min

13. Blocking Time 1 1 1 25 Min Seconds / min

14. Temperature Scale 9 Increments N/A 9, 5 Increments)

15. Tasks Apply Changes to Valve / Undo Changes

1. Valve Setup / 6. Duty Flush Setup

1. Activation Manual Manual Manual, Automatic

1367864-W2-C

* Flow rates are limited by the supply regulation of 2 L/min hot and cold 4 L/min.

2. Type

Standard Standard Disabled,

Standard,

Standard

oscillation

Disabled, Standard,

Standard oscillation

2. Type

Standard Standard Disabled,

Standard,

Standard

Oscillation, Smart,

Smart Oscillation

Disabled,

Standard, Standard

Oscillation, Smart,

Smart Oscillation

3. Activation Time 02:00 Hrs 02:00 Hrs Time 24 Hr

Clock

4. Duration 1 Min 1 Min 1 S 25 min Seconds / Min

5. Frequency 1 Per 3 Days 1 Per 3 Days 1 Hr 1 Week Hrs / day / 1

Week

6. Schedule Auto Populated Field

7. Temperature 39 39 37 41 deg C

8. Flow Rate 100 100 10 100 %

9. Warm Up Time 1 Min 1 Min 1 S 25 Min Seconds / Min

10. Post Cold Flush 00 0 10 Seconds / min

11. Tasks Apply Changes to Valve / Undo Changes

1.Valve Setup / 7. Cold Flush

Setup

1. Activation Manual Manual Manual, Automatic

2. Type Disabled Disabled Disabled, Standard

3. Activation Time 04:00 Hrs 04:00 Hrs Time 24 Hr

Clock

4. Duration 2 Mins 2 Mins 5 S 10 Mins Seconds / Min

5. Frequency 1 Per 3 Days 1 Per 3 Days 1 Hr 1 Week Hrs/Day/1Week

6. Schedule Auto Populated Field

7. Cool Down Temperature 19 19 15 <= Maintain Temperature deg C

8. Maintain Temperature 20 20 15 30 deg C

9. Cool Down Timeout 2 Mins 2 Mins 5 S 10 Mins Seconds / Min

10. Flow Test Start / Stop

11. Flow Rate 100 100 10 100 %

12. Taks Apply Changes to Valve / Undo Changes

1. Valve Set Up / 8. Thermal

Disinfection Setup

1. Activation Manual Manual

2. Type Disabled Disabled Disabled, Standard, Exponential,

Standard Cold, Exponential Cold

3. Duration 20 20 130 Mins

4. Minimum Temperature 60 60 60 <=Upper deg C

5. Upper Temperature 60 60 >=Lower 80 deg C

6. Flow Rate 10 10 10 100 %

7. Warm Up Time 5 5120 Mins

8. Timeout 30 30 159 Mins

71367864-W2-C

1 x Tap q

1 x Backplate q

1 x Rada Disable Key q

2 x Connector q

2 x Nut q

2 x Screw q

1 x Template q

1 x Adapter q

4 x Fixing Screw q

4 x Wall Plug q

1 x Power Supply q

2 x Check valve / Filter

Housing Assemblies q

Pack Contents

1 x Flush Pipe q

4 Nuts and Olives q

(for 150 mm

Version Only)

1367864-W2-C

Dimensions

MX1 80

55 mm

100 mm

44 mm

47 mm

220 mm

150 mm

199 mm

220 mm

80 mm

40 mm

170 mm

26 mm

30º

Connection to Power Supply Unit

PSU Mains Cable

2 m

PSU TAP

PSU 12V Cable Extension Cable

Total Cable Run: 1.18 m

Total Cable Run with Extension Cable: 3.68 m

Product Tail

1.0 m 2.5 m 0.18 m

91367864-W2-C

MX1 60

55 mm

100 mm

44 mm

262 mm

200 mm

47 mm

199 mm

262 mm

80 mm

40 mm 26 mm

170 mm

30º

PSU Mains Cable

2 m

PSU TAP

PSU 12V Cable Extension Cable

Total Cable Run: 1.18 m

Total Cable Run with Extension Cable: 3.68 m

Product Tail

1.0 m 2.5 m 0.18 m

Connection to Power Supply Unit

1367864-W2-C

Ø15 mm

Ø25 mm

Ø2 mm

Installation

Installation of the Tap on the Stud wall and IPS panel

Use the installation template provided, level and mark the positions of the holes.

For Correct Height

Refer to HBN00-10

Part C

Drill the holes to the dimensions shown.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Kohler Sanitärprodukte Handbücher

Kohler

Kohler 72695T-B4 Bedienungsanleitung

Kohler

Kohler Glenbury Quiet-Close K-4733 Bedienungsanleitung

Kohler

Kohler FLIGHT NEUS E62C70-00 Bedienungsanleitung

Kohler

Kohler K-29221T Series Bedienungsanleitung

Kohler

Kohler BADRON K-5487T-B Bedienungsanleitung

Kohler

Kohler K-8297TW-HC-0 Bedienungsanleitung

Kohler

Kohler ALTERNA Bedienungsanleitung

Kohler

Kohler K-20257T-CP Bedienungsanleitung

Kohler

Kohler K-4919 Bedienungsanleitung

Kohler

Kohler K-2972 Montageanleitung

Kohler

Kohler K-8666X Bedienungsanleitung

Kohler

Kohler K-3593 Bedienungsanleitung

Kohler

Kohler MODULO 99960T-4V Bedienungsanleitung

Kohler

Kohler K-18829 Bedienungsanleitung

Kohler

Kohler K-15635 Bedienungsanleitung

Kohler

Kohler K-T16225 Bedienungsanleitung

Kohler

Kohler K-7322 Bedienungsanleitung

Kohler

Kohler Flipside 15596T Bedienungsanleitung

Kohler

Kohler Lyntier K-10331 Bedienungsanleitung

Kohler

Kohler K-72218-2BZ Bedienungsanleitung

Kohler

Kohler 27406-2MB Bedienungsanleitung

Kohler

Kohler K-10088 Montageanleitung

Kohler

Kohler Memoirs K-2238 Montageanleitung

Kohler

Kohler K-6813 Montageanleitung

Beliebte Sanitärprodukte Handbücher anderer Marken

Weka

Weka 506.2020.00E Betriebsanleitung

American Standard

American Standard DetectLink 6072121 Bedienungsanleitung

Uponor

Uponor Contec TS Bedienungsanleitung

Pfister

Pfister Selia 49-SL Bedienungsanleitung

Fortis

Fortis VITRINA 6068700 Bedienungsanleitung

Maxxus

Maxxus MX-M206-01 Bedienungsanleitung

Viega

Viega Prevista Pure 8512 Bedienungsanleitung

Viega

Viega Prevista Dry 8522.33 Bedienungsanleitung

Sanela

Sanela Lema SLP 59RB Bedienungsanleitung

Elkay

Elkay EDF15AC Installationshandbuch

Hans Grohe

Hans Grohe AXOR Citterio E 36702000 Handbuch

baliv

baliv WT-140 Bedienungsanleitung

BELLOSTA

BELLOSTA romina 0308/CC Bedienungsanleitung

Bristan

Bristan PS2 BAS C D2 Verdrahtungsschema

Crosswater

Crosswater Heir 18-31 Bedienungsanleitung

Sanela

Sanela SLVN 07 Bedienungsanleitung

Glacier bay

Glacier bay DORIND HD67478W-6001 Montageanleitung

Sterling Plumbing

Sterling Plumbing C741 Bedienungsanleitung

Kohler rada Intelligent Care MX1 Series Bedienungsanleitung

Beliebte Sanitärprodukte Handbücher anderer Marken