Kohler STRUKTURA K-5888T Bedienungsanleitung

1237458-T01-A

STRUKTURA

INSTALLATION INSTRUCTIONS

()

TOUCHLESS URINAL(REAR INLET)

K-5888T(3L/DC)/K-5888T-C05(3L/AC)

K-5888T-W(1L/DC)/K-5888T-WC05(1L/AC)

K-5888T-Y(0.5L/DC)/K-5888T-YC05(0.5L/AC)

-1-

, 2014

Observe all local plumbing and building codes.

Carefully inspect the new urinal for damage.

Site preparation may require additional tools and

hardware.

Handle with care. Vitreous china can break

or chip if the product is handled carelessly.

CAUTION: Risk of personal injury or product

damage.

Please read these instructions carefully to familiarize

yourself with the required tools, materials, and installation

sequences. Follow the sections that pertain to your

particular installation. This will help you avoid costly

mistakes. In addition to proper installation, read all

operating and safety instructions.

All information in these instructions is based upon the

latest product information available at the time of

publication. Kohler China reserves the right to make

changes in product characteristics, packaging, or

availability at any time without notice.

These instructions contain important care, cleaning, and

warranty information -

please leave instructions for the

consumer

Open end/adjustable wrenches

Tape measure

Basin wrench

Pipe wrench

Square

Level

Pliers

Socket wrench with sockets

Screw driver

Seal tape

Connection wire

Wire cutter

Insulation tape

Bushing

Drill

Sealant

RECOMMENDED TOOLS AND MATERIALS (NOT SUPPLIED)RECOMMENDED TOOLS AND MATERIALS (NOT SUPPLIED)

()

BEFORE YOU BEGIN

1237458-T01-A

0.18~0.55MPa.

K-5888T(3L/DC)/K-5888T-C05(3L/AC) 3L

K-5888T-W(1L/DC)/K-5888T-WC05(1L/AC) 1L

K-5888T-Y(0.5L/DC)/K-5888T-YC05(0.5L/AC) 0.5L

1~ 55 C

0.07Mpa( )~0.86MPa( )

2 5 (AA 2)( ) 220V AC 50/60Hz ( )

SPECIFICATIONS

-2-

Power

Liter per flushing

Temperature

Starting pressure

Testing time

Detecting method

2 AA size alkaline batteries(DC) 220V AC 50/60Hz (AC)""

Water pressure at 0.18~0.55 MPa:

Less than 3L (K-5888T(3L/DC)/K-5888T-C05(3L/AC))

Less than 1L (K-5888T-W(1L/DC)/K-5888T-WC05(1L/AC)

Less than 0.5L (K-5888T-Y(0.5L/DC)/K-5888T-YC05(0.5L/AC)

)

Environmental temperature: 1 to 55 C

0.07Mpa (Dynamic pressure)~0.86MPa (Static pressure)

About 2 to 5 seconds

Detecting the urine and human movement

ROUGHING-IN

Unit:mm

Reference Value

Kohler reserves the right to change marked dimensions without prior notice.

Fig.1

·Roughing-in dimensions are identical if using an optional

3"outlet spud.

·3"

* Recommended dimensions for installation only, please

adjust according to actual situation.

2" NPT Tap

Supply

Floor

Wall

361

545

165 158

302

340

*600

*447

32 744

1237458-T01-A -3-

(

)

NOTE:

For Retrofit Installations

For New Installations

If a pre-existing waste pipe will be used and will result

in an acceptable rim height (refer to the rough-in dimensions),

follow the retrofit installation instructions.

Turn the water supply line off, remove the existing urinal,

then cap off the water supply line inside the wall.

Install waste pipe as necessary to conform to the

roughing-in dimensions.

Install adequate support framing for the hangers as

needed.

Fig.2

PREPARE THE SITEPREPARE THE SITE

Drain Connection

Notice: To ensure an effective flush performance,

strongly recommended inner diameter of

water supply (including water meter, valve, etc.)

is no less than 25mm, and supplied water

pressure (sensor inlet dynamic pressure) is

0.18MPa ~0.55MPa.

(

) 25mm (

) 0.18MPa ~0.55MPa

A. Install hangers, L shape block and waste pipe

connector

Drill holes according to template. Install hangers, L shape

block and waste pipe connector. (Gasket of waste pipe

connector shall be soaked into water for 2 seconds to

lubricate.)

A. L

()

INSTALLATION

Wall Hangers

Wall

Fig.3

Wall Hangers

Wall

Pre-installed waste

pipe connector

Insert the connector into the waste

pipe in the wall along this direction.

Move the gasket to front

of the pipe before

connecting to the urinal.

1237458-T01-A -4-

B. Install urinal B.

1. Test flushing. Remove regulator (supplied only for 3L urinal)

when water pressure is too low.

2. Connect inlet pipe and fill valve.

3. Hang the urinal onto the hangers.

4. Loosen the nut and drag the clamp towards center. Take

out the fixture, valve and battery box assembly at the

bottom. Load batteries.

5. Pull the bottom of the urinal outwards to make space. Align

the big nut with the waste pipe and then tighten.

6. Push the urinal against wall and tighten it with screws.

7. Fix the connectors and then put the fixture, valve and

battery box assembly back into the urinal.

8. Apply silicone sealant between urinal and wall.

1. 3L

Fig.5

Fig.4

Fig.6

Fixture, Valve, Assy

Lock Nut

Clamp

Screw Hole

Big Nut

Back of Urinal

Regulator

Nozzle

Remove

1237458-T01-A -5-

D. Install the drain and the plastic trap

NOTE:

1. Put the washer onto the drain and insert it into the hole.

2. Put the gasket and nut on the bottom.

Do not over screw the nut in this step, because it is

to be screwed tight in the next step after the pipe is

installed.

Fig.9

Fig.10

3. Connect the hose with the trap.

4. Screw the trap onto the drain and screw tight.

5. Screw tight the nut of the drain mentioned in step.

5. 2

Fig.8

2. As shown in the picture below, if the position of the urinal

needs to be adjusted, please take down the urinal and

knock the hanger slightly to adjust its position upwards and

downwards.

Adjust Upwards and Downwards

3. After the position of the urinal is decided, completely fix the

hanger with the bolt through the fixing holes on the hanger.

Fig.7

C. Adjust the hanger

1. As shown in the picture below, firmly press the hanger with

the bolt through the waist-shaped hole.

Fixing Hole

Waist-shaped Hole

1237458-T01-A -6-

F. Install the sensor controller

1. Install the sensor controller box.

2. Connect the sensor wire.

Fig.14

Fig.15

3. Connect with the hose.

Supply

Fig.13

2. Install the manual button. Insert the button into the hole,

then put on the washer and the nut.

Fig.12

E. Install the manual button and magnetic valve

1. Install the magnetic valve.

6. Screw on the drain lid(For first-time installation, the water

may drain slowly. It can be improved by loosening the drain

cover). The drain after being loosened is as shown.

6. (

)

Fig.11

1237458-T01-A -7-

Fig.16

Fig.17

Fig.18

G. Install and uninstall the Fixture, Valve Battery Box

Assembly

Unscrew the screws on the Fixture, Valve, Battery Box

Assembly and withdraw the clamp. Remove the Fixture, Valve

Battery Box Assembly from the urinal by moving it rightwards

and then downwards. Fix the Fixture, Valve Battery Box

Assembly back to the urinal by doing the above steps

inversely.

Screw

Clamp

Stop_Filter Assy

Outer diameter of

bush is no more

than 25mm

<25mm

H. Power Connection

1. Please directly reference to Fig.21 when installing K-5888T,

K-5888T-W or K-5888T-Y(DC).

2. Please match 16306T-NA AC power unit when installing K-

5888T-C05, or K-5888T-WC05, or K-5888T-YC05(AC). The

way of installation is as shown.

1. K-5888T K-5888T-W K-5888T-Y

2. K-5888T-C05 K-5888T-WC05 K-5888T-

YC05 16306T-NA

CAUTION:

a. Do not connect 220V AC Power supply to

DC wiring terminal.

b. Do not damage the covering of AC power

unit or remove screws to avoid leakage.

a. 220V

A. Fig.18: AC power unit connect way:

AC power unit is connected to electric control box

by connection wire.

A. 18

Connector

Wire prepared

by customer

Connector

Connect with the same color wire,

and protect connect area by insulation tape.

16306T-NA

AC Power Unit

Control Box Assy.

Wall

Floor

600

300

Outer diameter of bush is no

more than 25mm

<25mm

1237458-T01-A

Notice:

a. Keep the connector away from water.

b. Don't mistake the direction of inlet and outlet.

c. Do not connect the DC output of AC power unit to AC

power supply.

d. Do not connect to power supply while installing.

Connection line is not supplied. AC connection wire with

insulating sleeving is recommended. Wire of which the

nominal sectionn area of conductor is not less than 0.5mm

is also recommend. DC connection line use wire of which

the nominal section area is not less than 0.3mm . It is cut

according to acted installation requirements (The length of

cut wire is recommended less than 10m).

e. The head AC power supply must be protected with

appropriate fuse.

f. Please confirm the AC power supply and water supply

should be shut off before maintaining the products with AC

power related.

0.5mm

0.3mm

10m

-8-

Fig.19

B. When installing the power uint on the ceiling, please layout

bushing according to Fig.19 and thread wire through the

bushing.

Fig.19: Connection sketch while installing power uint on

the ceiling.

One AC power unit can supply two sensors

at most.

CAUTION:

Bushing

Bushing Bushing

AC Power Unit

Ceiling

2" NPT Tap

Floor

300 300

447 447

600 600

1237458-T01-A -9-

Deodorizing Flushing

The urinal will take a flush automatically when it's used 3 or 4

times in 2 minutes.

2 3-4

Replacement of Batteries

When the batteries run out, please remove the Battery Box

Assembly by following the instructions in step C and then

replace the batteries.

Screw M3 22

M3 22

Cover of Battery Box

Battery Box

Fig.21

USER S GUIDEUSER S GUIDE

Illustrations

The urinal will automatically flush after using.

Fig.20

1237458-T01-A

Manual Flushing

Sensorless Cleaning Mode

Press the manual button for about 1 second and the urinal will

automatically flush once.

Enter the sensorless cleaning mode by pressing the manual

button for about 3 seconds after the flushing is finished. The

controller will ring twice every 2 seconds.

Under this mode, press the manual button for about 1 second to

start or stop flushing. The longest continuous flushing time is

about 15 seconds.

The urinal will automatically exit this mode after it started for

about 8 seconds. You can also exit this mode by pressing the

manual button for about 5 seconds. The controller stops ringing

after the urinal exiting this mode.

This function can be used after the power is

turned on for ten minutes.

Notice:

Manual Button

Fig.22

-10-

MAINTENANCE

Fig.23

Clean the Filter Screen

If the flushing volume reclines sharply after installation or

used for a long time with no cause from water pressure, the

filter may need a wash. Please operate as following steps:

Remove the

a. Turn off the water supply and power

supply before cleaning the filter.

b. Avoid damaging or losing the filter during

cleaning.

Caution:

Fixture, Valve, Battery Box Assembly and take

out the filter, clean the filter and then reinstall it.

Filter Valve Cap Kit

Fixture, Valve,

Battery Box Assy.

Inhaltsverzeichnis

Andere Kohler Toilette Handbücher

Kohler

Kohler EIR K-77798T-0 Montageanleitung

Kohler

Kohler User Manual K-23188T-NS Bedienungsanleitung

Kohler

Kohler REACH K-3856T-S Bedienungsanleitung

Kohler

Kohler K-3451 Montageanleitung

Kohler

Kohler STERLING 402076 Montageanleitung

Kohler

Kohler K-3465 Montageanleitung

Kohler

Kohler K-20797T-S Bedienungsanleitung

Kohler

Kohler ESCALE K-95027T Bedienungsanleitung

Kohler

Kohler PERSUADE K-3654T-W Bedienungsanleitung

Kohler

Kohler WELLWORTH K-5778T Bedienungsanleitung

Kohler

Kohler novita BN330 Bedienungsanleitung

Kohler

Kohler S-TRAP K-23188T-ITHC Bedienungsanleitung

Kohler

Kohler C3-430 K-27142-CR Bedienungsanleitung

Kohler

Kohler K-11456 Montageanleitung

Kohler

Kohler K-3723 Benutzerhandbuch

Kohler

Kohler K-5401KR Bedienungsanleitung

Kohler

Kohler K-6191X Montageanleitung

Kohler

Kohler K-3423 Bedienungsanleitung

Kohler

Kohler S-TRAP K-3983T Bedienungsanleitung

Kohler

Kohler K-3754 Montageanleitung

Kohler

Kohler K-19037T Bedienungsanleitung

Kohler

Kohler ADAIR K-8699T Bedienungsanleitung

Kohler

Kohler SAN MARTINE K-5503T-TFC1 Bedienungsanleitung

Kohler

Kohler K-4026T-2A-0 Bedienungsanleitung

Beliebte Toilette Handbücher anderer Marken

Toto

Toto Washlet TCF4911 Series Bedienungsanleitung

Grohe

Grohe Sensia ARENA Bedienungsanleitung

Geberit

Geberit AQUACLEAN MERA CLASSIC Bedienungsanleitung

Better Bathrooms

Better Bathrooms BUN/BeBa 27555/78725 Bedienungsanleitung

American Standard

American Standard CONCEPT Cube TF-2704 Bedienungsanleitung

BIOLAN

BIOLAN ECO Stücklistenhandbuch

Thetford

Thetford C260 Series Bedienungsanleitung

KELISS

KELISS T162A Series Bedienungsanleitung

BIOLAN

BIOLAN GARDEN TOILET Stücklistenhandbuch

washloo

washloo Prestige Bedienungsanleitung

JABSCO

JABSCO 37010 Series Bedienungsanleitung

Olympia

Olympia EPOQUE 69209 Bedienungsanleitung

DENCK

DENCK PURE-D Bedienungsanleitung

Silent Venus

Silent Venus SVP600 Wartungs- und Serviceanleitung

InBe

InBe IB/04.06050 Bedienungsanleitung

Swiss Madison

Swiss Madison Carré SM-1T264 Bedienungsanleitung

agape

agape PEAR 2 Bedienungsanleitung

Roca

Roca DAMA SENSO COMPACT Bedienungsanleitung