Kramer BC/VS-2216 Bedienungsanleitung

BC/VS-2216

INSTRUCTION MANUAL

BC/VS-2216: 16x16 Programmable Stereo Audio Matrix Switcher

The BC-2216 Programmable Stereo Audio Matrix Switcher is the top of the line of Kramer’s audio

switchers. The BC-2216 serves as a 16x16 Stereo Audio switcher, for any studio application. The

machine may be operated as a stand-alone matrix or work in conjunction with the KRAMER BC-

2516 Video Switcher.

The BC-2216 unit has an LCD readout and a key-pad controlled operation. The unit has a bright

LED readout showing the switchers status and a microprocessor built-in with an EEPROM for

storing and retrieving settings.

Operation:

Connect all sources and acceptors to the rear panel of the BC-2216 machine, as

explained in the following diagrams.

Interconnect, if necessary, the BC-2216 unit to either the BC-2516 or the BC-2616

machines using a flat cable with DB9 male-to-male connectors on each side.

Connect a cable between the DB9 socket of the BC-2216 unit to the serial port of the

PC for RS-232 control

Install the accompanying software on your hard disk, following the instructions in

the distribution diskette.

Operate the sources, acceptors as well as the BC-2216 unit.

The keypad operation is interactive. In order to perform a function, the required

function switch (CON, SYS, STO, or RCL) should be pressed. The LCD back-light

will turn on, and a dialogue between the user and machine is initiated.

CONnect - to connect an input to a selected output.

SYStem - This function selects whether the user wishes to work in audio breakaway

or not, i.e., should the audio switching be done separately from the video switching,

or should it follow the video switching. This function is also used for setting the

baud rate for the RS-232 communication port. When using this SYStem function,

please note that if you do not want to change a parameter, simply pressing ENT (i.e.

ENTER) will leave the previously set parameter in effect.

STOre - to save the present setup of the machine in memory. Up to 15 setups may

be saved.

RCL - the recall key is used to recall a setup saved in memory. The recalled setup

will blink on the LED displays, and user confirmation is required if the setup is to be

implemented.

PROGRAM display:

When using the keypad to control the machine, the LCD display becomes a user-friendly interface

between the user and the machine - prompting for user input, warning before data may be erased,

informing of setup parameters, etc.

STATUS display:

This 7-segment LED display shows the audio connections of the machine. The first digit is the input

which is connected to output 1, the second is the input which is connected to output 2, etc. When

recalling a saved setup, that setup will flash on the STATUS display. A flashing display does not

indicate the present status of the machine, it displays the status which will be set up if the user

confirms implementation.

The RS232 Interface:

The BC-2216 may be also controlled with the serial RS-232 interface. The switcher is supplied with

a program which, using this port, allows control and monitoring of the unit/s via a PC.

Technical Specifications:

INPUTS: 16 Stereo Audio, looping, 50K input impedance on terminal blocks.

OUTPUTS: 16 Stereo Audio, 50 Ohms on terminal blocks.

AUDIO BANDWIDTH: Exceeding 40 KHz.

CROSSTALK: Less than 70dB (1KHz).

THD: Less than 0.1%

COUPLING: AC.

MAXIMAL SIGNAL LEVEL: 12Vpp.

AUDIO S/N: Better than 85 dB (+4dBm).

CONTROL: Microprocessor and EEPROM.

INTERFACE: RS-232.

STORAGE CAPACITY: 15 presets.

DIMENSIONS: 19 inch, 2U, rack mountable.

POWER SOURCE: 230 VAC (115VAC, U.S.A.).

WEIGHT: 3.7 Kg.

Please note that if the output signal is disturbed or interrupted by very strong external electromagnetic interference, it

should return and stabilize when such interference ends. If not, turn the power switch off and on again to reset the

machine. The socket-outlet shall be installed near the equipment and shall be easily accessible. To fully disconnect

equipment, remove power cord from its socket.

Inhaltsverzeichnis

Andere Kramer Matrix-Umschalter Handbücher

Kramer

Kramer 88HDS Bedienungsanleitung

Kramer

Kramer Sierra Video 1616V5 Bedienungsanleitung

Kramer

Kramer VP-23RC Bedienungsanleitung

Kramer

Kramer VS-3232DVI Bedienungsanleitung

Kramer

Kramer Sierra Video 3216V3 Bedienungsanleitung

Kramer

Kramer VS-66HN Bedienungsanleitung

Kramer

Kramer VS-808TP Bedienungsanleitung

Kramer

Kramer Sierra Video 6432V5xl Bedienungsanleitung

Kramer

Kramer VS-44H2 Bedienungsanleitung

Kramer

Kramer Sierra Video 4848V5xl Bedienungsanleitung

Kramer

Kramer VP-727 Bedienungsanleitung

Kramer

Kramer SD-7308 Bedienungsanleitung

Kramer

Kramer VS-88H Bedienungsanleitung

Kramer

Kramer AFM-20DSP-LE Bedienungsanleitung

Kramer

Kramer VS-88UT Bedienungsanleitung

Kramer

Kramer VS-3232A Bedienungsanleitung

Kramer

Kramer VS-3232V Bedienungsanleitung

Kramer

Kramer MTX3-34-M Bedienungsanleitung

Kramer

Kramer VS-88UHDA Bedienungsanleitung

Kramer

Kramer Sierra Video 1208V3S Bedienungsanleitung

Kramer

Kramer VS-34FD Bedienungsanleitung

Kramer

Kramer 3232D Bedienungsanleitung

Kramer

Kramer Sierra Video 6448V5Sxl Bedienungsanleitung

Kramer

Kramer XL 1616V Bedienungsanleitung

Beliebte Matrix-Umschalter Handbücher anderer Marken

Broadcast Tools

Broadcast Tools SS 8.2 Bedienungsanleitung

Altimium

Altimium MATF32 Bedienungsanleitung

ALFAtron

ALFAtron ALF-MUK44N Bedienungsanleitung

Monoprice

Monoprice Blackbird 15377 Bedienungsanleitung

PTN

PTN FMX12 Bedienungsanleitung

CYP

CYP nT15GX01 Bedienungsanleitung

TESmart

TESmart HMA0402A40 Bedienungsanleitung

Octava

Octava HD4XSTPMX Bedienungsanleitung

Intelix

Intelix FLX-88 Betriebsanleitung

Roland

Roland XS-1HD Bedienungsanleitung

Atlona

Atlona AT-HDMI-22M Bedienungsanleitung

Link

Link HD8X8 Bedienungsanleitung

AMX

AMX AVS-OP-2020-117 Anleitungen und Rezepte

Lindy

Lindy 38042 Bedienungsanleitung

Extron electronics

Extron electronics MTPX Plus Series Bedienungsanleitung

Key Digital

Key Digital Champion KD-16x16CS Bedienungsanleitung

Shinybow USA

Shinybow USA SB-8811 Bedienungsanleitung

Optimus

Optimus Compact Bedienungsanleitung