Kramer VS-1616DN-EM Bedienungsanleitung

P/N: 2900-300928 Rev 6 www.KramerAV.com

USER MANUAL

MODEL:

VS-1616DN-EM

2x2 to 16x16 Modular Multi-Format

Managed Digital Matrix Switcher

Kramer Electronics Ltd. 
 
VS-1616DN-EM –Contents 
i 
 
Contents 
Introduction 1 
Getting Started 2 
Overview 4 
Defining the VS-1616DN-EM 2x2 to 16x16 Modular Multi-Format Managed Digital Matrix Switcher 6 
Mounting VS-1616DN-EM 10 
Connecting the VS-1616DN-EM 11 
Port Numbering 12 
Connecting to the VS-1616DN-EM via RS-232 13 
Connecting to the VS-1616DN-EM via USB (VCOM) 13 
Connecting to the VS-1616DN-EM via Ethernet 13 
Operating –Front Panel Buttons 17 
Startup Display 17 
Viewing the Display 18 
Using the Selector Buttons 18 
Confirming Actions 18 
Switching Actions 19 
Locking the Front Panel Buttons 22 
Using the Configuration Menus 23 
Using the Setup Menu 23 
Using the Config Menu 27 
Configuring the Number of Installed Input and Output Ports 33 
Operating and Configuring –Embedded Web Pages 34 
Browsing Web Pages 35 
Switching –Web Pages 36 
Copying EDID –Web Pages 37 
Configuring Ports –Web Pages 37 
Using the Test Video Plus Analog Audio Card 38 
Defining the Test Video Plus Analog Audio Card 38 
Setting the Resolution of the Generated Video 40 
Setting the Pattern of the Generated Video 40 
Installing the Test Module 41 
Using the Input / Output Cards 42 
Defining the UHD-IN2-F16 / UHD-OUT2-F16 42 
Defining the UHDA-IN2-F16 / UHDA-OUT2-F16 44 
Defining the HDBT7-IN2-F16 / HDBT7-OUT2-F16 48 
Defining the DTAxr-IN2-F16 / DTAxr-OUT2-F16 51 
Defining the HDBT-IN2-F16 / HDBT-OUT2-F16 55 
Defining the HH-IN2-F16 / HH-OUT2-F16 59 
Defining the HS-OUT2-F16 60 
Defining the HAD-IN2-F16 / HAD-OUT2-F16 63 
Defining the HAA-IN2-F16 / HAA-OUT2-F16 65 
Defining the HDCP-IN2-F16 / HDCP-OUT2-F16 68 
Defining the DGKat-IN2-F16 / DGKat-OUT2-F16 70 
Defining the F670-IN2-F16 / F670-OUT2-F16 73 
Defining the F610-IN2-F16 / F610-OUT2-F16 74 
Defining the DVI-IN2-F16 / DVI-OUT2-F16 75 
Defining the DL-IN1-F16 / DL-OUT1-F16 76 
Defining the SDIA-IN2-F16 77 
Defining the VGA-IN2-F16 / VGA-OUT2-F16 79 
Defining the VGAA-OUT2-F16 / VGAA-IN2-F16 81 
Defining the AAD-IN2-F16 / AAD-OUT2-F16 85 
Defining the UHDS-OUT2-F16 87 
Using the Test Module to Troubleshoot Video and Audio Problems 89 
Troubleshooting Video Problems 89 
Troubleshooting Audio Problems 91 
Input / Output Card Hardware Installation Instructions 93 
Replacing a FAN-16DN Fan Array 95 

Kramer Electronics Ltd.

VS-1616DN-EM –Contents

Installing a PS-16DN Power Supply 96

Upgrading the VS-1616DN-EM Firmware 97

Upgrading Firmware Using K-Upload 97

Upgrading Firmware Using Kramer Network 98

Technical Specifications 99

VS-1616DN-EM Chassis 99

Quick VS-1616DN-EM Card Comparison 100

Default Settings 102

Default Communication Parameters 102

Factory Default EDID 102

Protocol 3000 122

Understanding Protocol 3000 Commands 123

Protocol 3000 Syntax 124

Protocol 3000 Commands 124

Using the Packet Protocol 151

Kramer Electronics Ltd.

VS-1616DN-EM –Introduction

Introduction

Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been providing a world

of unique, creative, and affordable solutions to the vast range of problems that confront video,

audio, presentation, and broadcasting professionals on a daily basis. In recent years, we have

redesigned and upgraded most of our line, making the best even better!

Congratulations on purchasing your Kramer VS-1616DN-EM 2x2 to 16x16 Modular

Multi-Format Managed Digital Matrix Switcher. This product, which incorporates HDMI™

technology, is ideal for:

•Professional display systems requiring video signal routing

•Broadcast, presentation and production facilities, as well as monitoring in large

duplication systems

•Rental/staging applications

Throughout this user manual the chassis configuration is shown with 16 DVI inputs and 16

DVI outputs as a representation only.

The following cards are available and may be mixed in the same chassis:

•UHD-IN2-F16 / UHD-OUT2-F16

(Defining the UHD-IN2-F16 / UHD-OUT2-F16 on page 42).

•UHDA-IN2-F16 / UHDA-OUT2-F16

(Defining the UHDA-IN2-F16 / UHDA-OUT2-F16 on page 44).

•HDBT7-IN2-F16 / HDBT7-OUT2-F16

(Defining the HDBT7-IN2-F16 / HDBT7-OUT2-F16 on page 48).

•DTAxr-IN2-F16 / DTAxr-OUT2-F16

(Defining the DTAxr-IN2-F16 / DTAxr-OUT2-F16 on page 51).

•HDBT-IN2-F16 / HDBT-OUT2-F16

(Defining the HDBT-IN2-F16 / HDBT-OUT2-F16 on page 55).

•HH-IN2-F16 / HH-OUT2-F16

(see Defining the HH-IN2-F16 / HH-OUT2-F16 on page 59).

•HS-OUT2-F16

(Defining the HS-OUT2-F16 on page 60).

•HAD-IN2-F16 / HAD-OUT2-F16

(Defining the HAD-IN2-F16 / HAD-OUT2-F16 on page 63).

•HAA-IN2-F16 / HAA-OUT2-F16

(Defining the HAA-IN2-F16 / HAA-OUT2-F16 on page 65).

•HDCP-IN2-F16 / HDCP-OUT2-F16

(Defining the HDCP-IN2-F16 / HDCP-OUT2-F16 on page 68).

The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.

Kramer Electronics Ltd.

VS-1616DN-EM –Introduction

•DGKat-IN2-F16 / DGKat-OUT2-F16

(Defining the DGKat-IN2-F16 / DGKat-OUT2-F16 on page 70).

•F670-IN2-F16 / F670-OUT2-F16

(Defining the F670-IN2-F16 / F670-OUT2-F16 on page 73).

•F610-IN2-F16 / F610-OUT2-F16

(Defining the F610-IN2-F16 / F610-OUT2-F16 on page 74).

•DVI-IN2-F16 / DVI-OUT2-F16

(Defining the DVI-IN2-F16 / DVI-OUT2-F16 on page 75).

•DL-IN1-F16 / DL-OUT1-F16

(Defining the DL-IN1-F16 / DL-OUT1-F16 on page 76).

•SDIA-IN2-F16

(Defining the SDIA-IN2-F16 on page 77).

•VGA-IN2-F16 / VGA-OUT2-F16

(Defining the VGA-IN2-F16 / VGA-OUT2-F16 on page 79).

•VGAA-OUT2-F16 / VGAA-IN2-F16

(Defining the VGAA-OUT2-F16 / VGAA-IN2-F16 on page 81).

•AAD-IN2-F16 / AAD-OUT2-F16

(Defining the AAD-IN2-F16 / AAD-OUT2-F16 on page 85).

•UHDS-OUT2-F16

(see Defining the UHDS-OUT2-F16 on page 87)

The F670-IN2/OUT2-F16 cards are fully compatible with the Kramer 670T/670R and

671T/671R HDMI/DVI transmitters and receivers for non-HDCP content.

Getting Started

We recommend that you:

•Unpack the equipment carefully and save the original box and packaging materials for

possible future shipment.

•Review the contents of this user manual.

Go to www.kramerav.com/downloads/VS-1616DN-EM to check for up-to-date user manuals,

application programs, and to check if firmware upgrades are available (where appropriate).

Achieving the Best Performance

To achieve the best performance:

•Use only good quality connection cables (we recommend Kramer high-performance,

high-resolution cables) to avoid interference, deterioration in signal quality due to poor

matching, and elevated noise levels (often associated with low quality cables).

•Do not secure the cables in tight bundles or roll the slack into tight coils.

Kramer Electronics Ltd.

VS-1616DN-EM –Introduction

•Avoid interference from neighboring electrical appliances that may adversely influence

signal quality.

•Position your VS-1616DN-EM away from moisture, excessive sunlight and dust.

Safety Instructions

Caution:

•This equipment is to be used only inside a building. It may only be connected to other

equipment that is installed inside a building.

•For products with relay terminals and GPI\O ports, please refer to the permitted rating

for an external connection, located next to the terminal or in the User Manual.

•There are no operator serviceable parts inside the unit.

Warning:

•Use only the power cord that is supplied with the unit.

•Disconnect the power and unplug the unit from the wall before installing.

•Do not open the unit. High voltages can cause electrical shock! Servicing by qualified

personnel only.

•To ensure continuous risk protection, replace fuses only according to the rating

specified on the product label which located on the bottom of the unit.

Recycling Kramer Products

The Waste Electrical and Electronic Equipment (WEEE) Directive 2002/96/EC aims to reduce

the amount of WEEE sent for disposal to landfill or incineration by requiring it to be collected

and recycled. To comply with the WEEE Directive, Kramer Electronics has made

arrangements with the European Advanced Recycling Network (EARN) and will cover any

costs of treatment, recycling and recovery of waste Kramer Electronics branded equipment on

arrival at the EARN facility. For details of Kramer’s recycling arrangements in your particular

country go to our recycling pages at www.kramerav.com/support/recycling/.

About Fast Switching

Older display devices require a longer time between the loss of one digital signal and the

introduction of another, as well as a physical disconnection of the interconnecting cable in

order to be able to detect and adjust to the new video attributes and parameters. Normal

switching, therefore, introduced a 5V signal disconnection along with a delay in switching.

Many newer display devices, however, are now capable of accepting “on-the-fly” switching.

Depending on the display device in use, the VS-1616DN-EM allows for fast switching (minor

reset and the connection kept alive) and extra fast switching (no reset and the connection

kept alive), see Config Menu—Setting Output Port Parameters on page 29. Using the fast and

extra fast switching modes allows for fraction-of-a-second switching times when using high

performance display devices or when using a scaler on the video output.

Kramer Electronics Ltd.

VS-1616DN-EM –Introduction

About HDBaseT™ Technology

HDBaseT™ is an advanced all-in-one connectivity technology (supported by the HDBaseT

Alliance). It is particularly suitable in the consumer home environment as a digital home

networking alternative where it enables you to replace numerous cables and connectors by a

single LAN cable used to transmit, for example, uncompressed full high definition video,

audio, IR, as well as various control signals.

The products described in this user manual are HDBaseT certified.

About Power Connect™

The Power Connect™ feature here means that the VS-1616DN-EM can supply power to the

TP transmitters and receivers (for example, the TP-573 and TP-574) as long as the devices

are within 90m (270ft) of each other. The Power Connect™ feature applies as long as the

cable can carry power and the distance does not exceed 90m on standard CAT 5 cable. For

longer distances, a heavier gauge cable should be used (a TP cable is still suitable for the

video/audio transmission, but not for feeding the power at these distances).

Overview

The Kramer VS-1616DN-EM is a high-performance matrix switcher chassis for AV signals.

The unit is modular and populated from 2 x 2 to 16 x 16 ports in increments of two inputs

and/or two outputs. The unit supports various signals, depending on the type of cards

installed and includes a power supply, control module and a test module that can monitor and

test any input and output in the matrix. It features a very high bandwidth of up to 3.4Gbps (for

the chassis only, effective bandwidth of the system depends on the input / output cards, see

Using the Input / Output Cards on page 42) that ensures transparent performance even in the

most critical applications. The cards re-clock and equalize the signals and the chassis can

route any or all inputs to any or all outputs simultaneously.

The VS-1616DN-EM is highly configurable –you can add or remove inputs and outputs

independently in groups of two and mix different types of input/output cards in the same

chassis. For example, you can configure a device as a 4 x 12 or a 16 x 8 matrix switcher to

exactly suit your needs.

The VS-1616DN-EM features:

•Full 16 x 16 non-blocking matrix array to switch any of the 16 input digital signals to any

or all outputs (see Connecting the VS-1616DN-EM on page 11.

•Easy access to 60 pre-set memory locations for quick access to user-defined setups.

•Fast switching on outputs to reduce or remove switching delay.

•Redundant, hot swappable power supply (optional).

•Modular, easily replaceable, low-noise cooling system.

•Simple firmware upgrade of compatible devices (see Upgrading the VS-1616DN-EM

Firmware on page 97).

Kramer Electronics Ltd.

VS-1616DN-EM –Introduction

•Seamless integration with Kramer Network for switching, card status, port status,

firmware upgrades (of compatible cards), and more.

•A 40 character by 2 line LCD that shows the operational status or the configuration

menu.

•A lock function to prevent tampering with the front panel.

•A default EDID (Extended Display Identification Data) for each input.

•EDID Capture –Copies and stores the EDID from a display device.

•Non-volatile EDID storage.

•Kramer Core™ – Flexible infrastructure conversion. Copper, fiber or Twisted Pair, all can

be used at the same time according to input/output module selection. The matrix

receives signals from compatible Kramer transmitters, automatically converts between

available infrastructure options and sends the signals to compatible Kramer receivers.

•Max. Data Rate –10.2Gbps (3.4Gbps per graphic channel) when using compatible

cards.

•HDTV Compatible.

•HDCP Compliant –With DVI (HDCP), HDMI, F670, HDBaseT, HDMI with audio and

DGKat modules.

•HDMI Support.

•DGKat™ Signal Integration – Kramer’s unique technology for converting TMDS as well

as control and communication to signals that run over twisted pair cables.

For optimum range and performance, use recommended Kramer cables, available at

www.kramerav.com/product/VS-1616DN-EM.

•Kramer Equalization & re-Klocking™ Technology – Rebuilds the digital signal to travel

longer distances.

•Optional Fast Switching Support –For fraction of a second switching.

•Modular & Easily Configurable Platform –Input or output module types can be mixed

and added in increments of 2 from 2x2 up to 16x16.

•Versatile Selection of Modules –Including DVI, HDMI, HDCP (HDMI over DVI

connector), Dual Link DVI, HDMI over Fiber, DVI over Fiber, HDBaseT, HDBaseT Lite,

HDMI with analog audio interface, HDMI with digital audio interface, VGA and DGKat

(HDMI over twisted pair).

•Kramer Protocol 3000.

•Flexible Configuration –To disable HDCP support and convert between HDMI and DVI.

You can operate the VS-1616DN-EM via the front panel buttons or remotely via:

•RS-232 or USB (VCOM) serial commands transmitted by a touch screen system, PC or

other serial controller.

•Ethernet over a LAN.

•Kramer Network enterprise management platform.

Kramer Electronics Ltd.

VS-1616DN-EM –Introduction

The VS-1616DN-EM is a sophisticated device but has nevertheless been designed to be

simple to operate using an intuitive front panel keypad. For details of how to route inputs to

outputs, see Switching Actions on page 19.

The VS-1616DN-EM is housed in a 19" rack-mountable enclosure.

Defining the VS-1616DN-EM 2x2 to 16x16 Modular

Multi-Format Managed Digital Matrix Switcher

This section defines the front and rear panels of the VS-1616DN-EM.

Figure 1: VS-1616DN-EM Front Panel

Buttons 15, 16 and 17 function as the TAKE, MENU and LOCK buttons respectively.

Feature

Function

Double-function

Selector

Buttons Area

Menu Button

Functions

ESC

Press to exit the current operation.

EDID

Press to assign EDID channels.

STO

Press to store the current setup in a preset. After pressing

the MENU button, this button lights and is enabled.

ALL

Press to connect an input to all outputs. After pressing the

MENU button, this button lights and is enabled.

OFF

Press to turn off an output. After pressing the MENU

button, this button lights and is enabled.

RCL

Press to recall a preset. After pressing the MENU button,

this button lights and is enabled.

DELAY

Press to set the delay between confirming an action and

the execution of the action.

ENTER

Press to complete the input-output setup when using a

one-digit number instead of two digits. For example, to

enter input 5, you can press either 05 or 5, ENTER.

Press to enter the options in a setup menu.

BREAKAWAY Button

Press to exit a Menu (see Using the Configuration

Menu on page 23).

Kramer Electronics Ltd.

VS-1616DN-EM –Introduction

DEFAULT SETUP Button

Press to recall the default setup (see Recalling the Default

Setup on page 21).

IR Receiver

Infrared remote control sensor (for future use).

IR LED

Lights yellow when receiving commands from the IR

remote control transmitter (for future use).

PS-1 POWER LED

Lights green when power supply is active.

PS-1 ERROR LED

Lights red when an error is detected. Briefly lights red

immediately following a power disruption (e.g., cable

disconnection, power off, and so on).

TAKE Button

Press to confirm actions (see Confirming a Switching

Action on page 19).

MENU Button

Press once to enable the ALL, OFF, STO and RCL buttons

(see Using the Configuration Menu on page 23).

Press again to enter the configuration menu (see Using the

Config Menu on page 27).

When in a Menu, press to cycle through the menu items.

LOCK Button

Press and hold for approximately 2 sec to lock/unlock the

front panel buttons (see Locking the Front Panel

Buttons on page 22).

OUTPUTS/INPUTS

LCD Display

Displays the outputs (upper row) switched to the selected

inputs (lower row), (see Startup Display on page 17).

Displays user interface messages and menus.

Front Panel Locking Screws

Release the 14 front panel locking screws to open the front

panel and access the fan arrays (see Replacing a FAN-

16DN Fan Array on page 95).

Power Supply Thumbscrews

Release the 4 power supply thumbscrews to install /

remove the PS-16DN power supply (see Installing a PS-

16DN Power Supply on page 96).

Figure 2: VS-1616DN-EM Front Panel Numeric Keypad

Feature

Function

◄ (Backward)

Press to shift the sliding window to the right (the LCD display only shows 13

cross-points out of a total of 16).

1, 2, 3, 4, 5, 6, 7, 8,

9, 0

Numeric keypad, 1 to 0.

► (Forward)

Press to shift the sliding window to the left (the LCD display only shows 13

cross-points out of a total of 16).

Inhaltsverzeichnis

Andere Kramer Matrix-Umschalter Handbücher

Kramer

Kramer Sierra Video 1208V3S Bedienungsanleitung

Kramer

Kramer VS-44H2A Bedienungsanleitung

Kramer

Kramer VP-725DS Bedienungsanleitung

Kramer

Kramer VS-88HC Bedienungsanleitung

Kramer

Kramer VS-88H2A Bedienungsanleitung

Kramer

Kramer 88V5S Bedienungsanleitung

Kramer

Kramer ASPEN-32UFX Bedienungsanleitung

Kramer

Kramer VS-1602xl Bedienungsanleitung

Kramer

Kramer VS-606xl Bedienungsanleitung

Kramer

Kramer VS-88HN Bedienungsanleitung

Kramer

Kramer VS-42HN Bedienungsanleitung

Kramer

Kramer XL 1608V4 Bedienungsanleitung

Kramer

Kramer VS-48HDCPxl Bedienungsanleitung

Kramer

Kramer VS-66HN Bedienungsanleitung

Kramer

Kramer VP-4x8AK Bedienungsanleitung

Kramer

Kramer VS-3232DN Bedienungsanleitung

Kramer

Kramer MTX3-16-M Bedienungsanleitung

Kramer

Kramer XL 3216VS Bedienungsanleitung

Kramer

Kramer VS-62DT Bedienungsanleitung

Kramer

Kramer Sierra Video 3264V5xl Bedienungsanleitung

Kramer

Kramer VS-162V Bedienungsanleitung

Kramer

Kramer 88V3S Bedienungsanleitung

Kramer

Kramer XL 3232V Bedienungsanleitung

Kramer

Kramer Sierra Video 6448V5Sxl Bedienungsanleitung

Beliebte Matrix-Umschalter Handbücher anderer Marken

Broadcast Tools

Broadcast Tools SS 8.2 Bedienungsanleitung

Altimium

Altimium MATF32 Bedienungsanleitung

ALFAtron

ALFAtron ALF-MUK44N Bedienungsanleitung

Monoprice

Monoprice Blackbird 15377 Bedienungsanleitung

PTN

PTN FMX12 Bedienungsanleitung

CYP

CYP nT15GX01 Bedienungsanleitung

TESmart

TESmart HMA0402A40 Bedienungsanleitung

Octava

Octava HD4XSTPMX Bedienungsanleitung

Intelix

Intelix FLX-88 Betriebsanleitung

Roland

Roland XS-1HD Bedienungsanleitung

Atlona

Atlona AT-HDMI-22M Bedienungsanleitung

Link

Link HD8X8 Bedienungsanleitung

AMX

AMX AVS-OP-2020-117 Anleitungen und Rezepte

Lindy

Lindy 38042 Bedienungsanleitung

Extron electronics

Extron electronics MTPX Plus Series Bedienungsanleitung

Key Digital

Key Digital Champion KD-16x16CS Bedienungsanleitung

Shinybow USA

Shinybow USA SB-8811 Bedienungsanleitung

Optimus

Optimus Compact Bedienungsanleitung