Kramer MV-5 Bedienungsanleitung

KRAMER ELECTRONICS LTD.

USER MANUAL

MODEL:

MV-5

5Channel Multiviewer

P/N: 2900-300134 Rev 5

MV-5 - Contents

Contents

1Introduction 1

2Getting Started 2

2.1 Achieving the Best Performance 2

2.2 Safety Instructions 2

2.3 Recycling Kramer Products 3

2.4 Accessory to Medical Equipment (IEC 60601-1) 3

3Overview 4

4Defining the MV-5 5 Channel Multiviewer 6

5Installing in a Rack 10

6Connecting the MV-5 5 Channel Multiviewer 11

6.1 Connecting to the MV-5 Using the RS-232 Connection 14

6.2 Connecting to the MV-5 Using the RS-485 Connection 14

6.3 Connecting to the MV-5 Using Ethernet 14

7Configuring and Operating the MV-5 Locally 18

7.1 Configuring the MV-5 Using the Menu 20

7.2 Operating the MV-5 Using the Front Panel Buttons 33

8Configuring and Operating the MV-5 Remotely 43

8.1 The Multiviewer Main Window 44

8.2 The Menu Bar 45

8.3 The Quick Access Toolbar 51

8.4 Using the MV-5 Multiviewer Software 53

9Upgrading the Firmware 60

10 Technical Specifications 61

11 Default Communication Parameters 62

12 Default EDID 63

13 Kramer Protocol 3000 64

13.1 Kramer Protocol 3000 Syntax 64

13.2 Kramer Protocol 3000 Commands 67

Figures

Figure 1: MV-5 5 Channel Multiviewer Front Panel 6

Figure 2: MV-5 5 Channel Multiviewer Rear Panel 8

Figure 3: Connecting the MV-5 5 Channel Multiviewer 12

Figure 4: Local Area Connection Properties Window 15

Figure 5: Internet Protocol Version 4 Properties Window 16

Figure 6: Internet Protocol Properties Window 17

Figure 7: Image Position and Scaling Example 35

Figure 8: MV-5 Controller Software Main Window 44

Figure 9: Background Color Window 46

Figure 10: Image Properties Window 47

Figure 11: Advanced Properties Window 48

Figure 12: Device Details Window 50

Figure 13: About MV-5 Window 51

Figure 14: Quick Access Toolbar 51

Figure 15: Quick Access Toolbar Icons 51

MV-5 - Introduction

Figure 16: Connection Method Window 52

Figure 17: Windows Position 53

Figure 18: Switch Buttons 54

Figure 19: Layer Order 55

Figure 20: Switching an Input to a Window 56

Figure 21: Windows Setup Window 57

Figure 22: Input Button Properties Window 59

MV-5 - Introduction

1 Introduction

Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been

providing a world of unique, creative, and affordable solutions to the vast range of

problems that confront video, audio, presentation, and broadcasting professionals

on a daily basis. In recent years, we have redesigned and upgraded most of our

line, making the best even better!

Our 1,000-plus different models now appear in 11 groups that are clearly defined

by function: GROUP 1: Distribution Amplifiers; GROUP 2: Switchers and Routers;

GROUP 3: Control Systems; GROUP 4: Format/Standards Converters; GROUP 5:

Range Extenders and Repeaters; GROUP 6: Specialty AV Products; GROUP 7:

Scan Converters and Scalers; GROUP 8: Cables and Connectors; GROUP 9:

Room Connectivity; GROUP 10: Accessories and Rack Adapters and GROUP 11:

Sierra Video Products.

Congratulations on purchasing your Kramer MV-5 5 Channel Multiviewer which is

ideal for:

Professional broadcasting and production studios

Presentation applications

Post production

MV-5 - Getting Started

2 Getting Started

We recommend that you:

Unpack the equipment carefully and save the original box and packaging

materials for possible future shipment

Review the contents of this user manual

2.1 Achieving the Best Performance

To achieve the best performance:

Use only good quality connection cables (we recommend Kramer high-

performance, high-resolution cables) to avoid interference, deterioration in

signal quality due to poor matching, and elevated noise levels (often

associated with low quality cables)

Do not secure the cables in tight bundles or roll the slack into tight coils

Avoid interference from neighboring electrical appliances that may adversely

influence signal quality

Position your MV-5 away from moisture, excessive sunlight and dust

This equipment is to be used only inside a building. It may only be

connected to other equipment that is installed inside a building.

2.2 Safety Instructions

Caution:

There are no operator serviceable parts inside the unit

Warning:

Use only the power cord that is supplied with the unit

Warning:

Do not open the unit. High voltages can cause

electrical shock! Servicing by qualified personnel only

Warning:

Disconnect the power and unplug the unit from the wall

before installing

MV-5 - Getting Started

2.3 Recycling Kramer Products

The Waste Electrical and Electronic Equipment (WEEE) Directive 2002/96/EC

aims to reduce the amount of WEEE sent for disposal to landfill or incineration by

requiring it to be collected and recycled. To comply with the WEEE Directive,

Kramer Electronics has made arrangements with the European Advanced

Recycling Network (EARN) and will cover any costs of treatment, recycling and

recovery of waste Kramer Electronics branded equipment on arrival at the EARN

facility.

2.4 Accessory to Medical Equipment (IEC 60601-1)

In the modern medical environment remote access is essential, for example, to

transfer clinical data between doctors and to train to medical students. The MV-5 is

certified according to the IEC 60601-1-2, Clause 2.1.3, Medical Electrical

Equipment, Part 1: General Requirements for EMC standard which is required

when accessory devices are used at locations where medical personnel and

patients are present.

The MV-5 constitutes an optional component that can be considered necessary

and suitable as part of medical equipment or for use as part of a medical system to

provide real time simultaneous video feeds to those present at the local medical

environment and at remote locations. In this environment, the MV-5 can be added

to the system ONLY if the connecting equipment has been evaluated and meets

the IEC 60601-1-2 EMC standards. Note, that when attaching accessory devices

to a digital or analog interface, they must comply with the IEC standard for which

they are used: EMC Standard (IEC 60601-1-2), Information Technology equipment

(IEC 60950-1 (2ed)).

MV-5 - Overview

3 Overview

The MV-5 is a versatile, high-performance video and graphic multi-viewer for DVI

signals, SD and HD analog signals up to 1920x1200@60Hz, and SDI signals up to

3G HD-SDI. The device can window up to four sources (plus a background) in any

layout and output the image as SDI, DVI, component and composite video signals.

Both preprogrammed and customizable screen division is supported.

In particular, the MV-5 features:

16 inputs with rapid selection and switching

An input bandwidth of up to 3Gbps which supports standard definition, high

definition and 3G high definition serial digital video signals

SMPTE 259M, 292M and 424M input compliance and support for data rates

of 270Mbps, 1.4835Gbps, 1.485Gbps, 2.967Gbps and 2.97Gbps

Input-cable equalization up to 350m (1150ft) for SD signals, 140m (459ft) for

1.5GHz HD signals, and 120m (394ft) for 3GHz HD signals

SD means an NTSC or PAL compatible video format, consisting of 480 (for NTSC) or

576 (for PAL) lines of interlaced video. HD means a video format consisting of 720

active lines of progressive video or 1080 lines of progressive or interlaced video

Any format to any format cross-conversion

Any Standard to any standard cross-conversion

HDCP support on DVI inputs/outputs

Four independent chroma-key engines for each image layer

Window and image scaling, zooming (up to 1000%), and aspect ratio control

Independent layer transparency control

Brightness, contrast, color and sharpness control

Window or input label insertion

Any frozen image capture can be saved in a file (up to four still images

1920x1200)

Recall an image from any file and represent it in any window or background

MV-5 - Overview

Image file exchange between MV-5 and a PC application using serial or

Ethernet ports

Loading any synthesized test pattern image

Multi-video output formats; SD-SDI (259M), HD-SDI (292M) and 3G HD-SDI

(SMPTE 424M), HDMI, HD, SD, analog and composite

Kramer re-Klocking™ and equalization on each input—rebuilds the digital

signal to travel longer distances

Flexible control options; front panel with menu LCD, Ethernet and RS-232

Screen handling buttons; freeze, size, position

16 user-definable screen layouts

A front panel lock button

The MV-5 is housed in a 19" 2U rack mountable enclosure and is fed from a

100-240 VAC universal switching power supply.

You can control the MV-5 using the front panel buttons, or remotely via:

RS-232/RS-485 serial commands transmitted by a serial controller (see

Section 6.1 and Section 6.2)

A PC connected to the Ethernet port on the device via a LAN using the

control software (see Section 6.3)

4 Defining the MV-5 5 Channel Multiviewer

Figure 1 defines the front panel of the MV-5.

Figure 1: MV-5 5 Channel Multiviewer Front Panel

Feature

Function

DVI INPUTS 1~4 Buttons

Press to select one of the DVI sources

WINDOWS 1~4 Buttons

Press to make one of the windows the upper-most window (see Section 7.2.1). The order of the other

windows is not changed

SDI INPUTS 1~4 Buttons

Press to select one of the SDI sources

FREEZE Button

Press to freeze and release the selected window signal

LCD 2 Line x 20 Character

Text Display

Displays the current configuration or menu

SAVE ASPECT Button

Press to turn on the Save Aspect mode whereby the window or image aspect is locked during size

adjustments (see Section 7.2.1)

MV-5 –Defining the MV-5 5 Channel Multiviewer

Inhaltsverzeichnis

Andere Kramer Medienkonverter Handbücher

Kramer

Kramer KDS-SW3-EN7 Bedienungsanleitung

Kramer

Kramer 401C Bedienungsanleitung

Kramer

Kramer DigiTOOLS 7408 Bedienungsanleitung

Kramer

Kramer VP-473 Bedienungsanleitung

Kramer

Kramer KDS-10 Bedienungsanleitung

Kramer

Kramer VP-420 Bedienungsanleitung

Kramer

Kramer FC-5000 Bedienungsanleitung

Kramer

Kramer VP-428H2 Bedienungsanleitung

Kramer

Kramer FC-49 Bedienungsanleitung

Kramer

Kramer PT-1H Bedienungsanleitung

Kramer

Kramer FC-69 Bedienungsanleitung

Kramer

Kramer KDS-EN6 Bedienungsanleitung

Kramer

Kramer VM-100CB Bedienungsanleitung

Kramer

Kramer VM-1120 Bedienungsanleitung

Kramer

Kramer VP-410 Bedienungsanleitung

Kramer

Kramer VP-424 Bedienungsanleitung

Kramer

Kramer TOOLS VP-100 Bedienungsanleitung

Kramer

Kramer VP-2K Bedienungsanleitung

Kramer

Kramer VP-501XL Bedienungsanleitung

Kramer

Kramer VP-472 Bedienungsanleitung

Kramer

Kramer VM-50AN Bedienungsanleitung

Kramer

Kramer VP-701XL Bedienungsanleitung

Kramer

Kramer VA-40 Bedienungsanleitung

Kramer

Kramer FC-4002 Bedienungsanleitung

Beliebte Medienkonverter Handbücher anderer Marken

SoundTraxx

SoundTraxx Blunami BLU-2200 Bedienungsanleitung

SPROLINK

SPROLINK VA1 Bedienungsanleitung

Acclaim Lighting

Acclaim Lighting DDC-1-AC Bedienungsanleitung

Nikon

Nikon AF-S TC-20E III Bedienungsanleitung

Axis

Axis AXIS Q7406 Bedienungsanleitung

Omega

Omega TAC80B-J Bedienungsanleitung

Zoom

Zoom Thunderbolt TAC-2R Bedienungsanleitung

OST

OST iConverter 10/100M Bedienungsanleitung

Vertiv

Vertiv Netsure Bedienungsanleitung

birddog

birddog MINI Bedienungsanleitung

Roland

Roland GI-10 Bedienungsanleitung

Wallenstein

Wallenstein WX310 Bedienungsanleitung

Pace

Pace MSS 200-1 Bedienungsanleitung

Solar Converters

Solar Converters EQ 12/24-50 Bedienungsanleitung

CYP

CYP EL-7400V Bedienungsanleitung

TIE

TIE MIDI 1i1o Bedienungsanleitung

DCS

DCS Vivaldi Upsampler Bedienungsanleitung

Westermo

Westermo MCW-211 SERIES Bedienungsanleitung