Kramer VM-1610 Bedienungsanleitung

VM-1610 Quick Start

P/N:

2900- 301268QS

Rev:

Scan for full manual

VM-1610 Quick Start Guide

This guide helps you install and use your VM-1610 for the first time.

Go to www.kramerav.com/downloads/VM-1610 to download the latest user manualand check if firmware

upgrades are available.

Step 1: Check what’s in the box

VM-1610 Balanced Audio-Stereo Distributor

4 Rubber feet

1 Power cord

1 Quick start guide

Step 2: Get to know your VM-1610

Feature

Function

POWER Switch

Illuminated power switch to turn the unit on and off.

CH 2 LEVEL (LEFT, RIGHT) Trimmers

Turn to adjust the left and right audio gains of channel 2.

MODE (1:10, 2x1:5) Button

Press to select 2x1:5 output, release to select 1:10 output.

CH 1 LEVEL (LEFT, RIGHT) Trimmers

Turn to adjust the left and right audio gains of channel 1.

CHANNEL 1 OUT Terminal Blocks

Connect to the channel 1 balanced stereo acceptors (1 to 5).

CHANNEL 1 INPUT Terminal Block

Connect to balanced stereo source 1.

CHANNEL 2 INPUT Terminal Block

Connect to balanced stereo source 2.

CHANNEL 2 OUT Terminal Blocks

Connect to the channel 1 balanced stereo acceptors (6 to 10) or connect to the

channel 2 balanced stereo acceptors (1 to 5).

Power Connector with Fuse

AC connector enabling power supply to the unit.

Step 3: Mount VM-1610

To rack mount the machine, attach both rack ears

(by removing the screws from each side of the

machine and replacing those screws through the

rack ears) or place the machine on a table.

•Ensure that the environment (e.g., maximum ambient temperature &

air flow) is compatible for the device.

•Avoid uneven mechanical loading.

•Appropriate consideration of equipment nameplate ratings should be

used for avoiding overloading of the circuits.

•Reliable earthing of rack-mounted equipment should be maintained.

Step 4: Connect inputs and outputs

Always switch OFF the power on each device before connecting it to your VM-1610.

To achieve specified extension distances, use the recommended Kramer cables available at www.kramerav.com/product/VM-1610.

Using third-party cables may cause damage!

Step 5: Connect power

Connect the power cord to VM-1610 and plug it into the mains electricity.

Safety Instructions (See www.kramerav.com for updated safety information)

Caution:

•For products with relay terminals and GPI\O ports, please refer to the permitted rating for an external connection, located next to the

terminal or in the User Manual.

•There are no operator serviceable parts inside the unit.

Warning:

•Use only the power cord that is supplied with the unit.

•Disconnect the power and unplug the unit from the wall before installing.

•Do not open the unit. High voltages can cause electrical shock! Servicing by qualified personnel only.

•To ensure continuous risk protection, replace fuses only according to the rating specified on the product label which located on the

bottom of the unit.

Step 6: Operate VM-1610

1. Set the MODE (1:10, 2x1:5) button to the required connection mode.

2. If required, adjust the level trimmers with a small screwdriver.

Andere Handbücher für VM-1610

Inhaltsverzeichnis

Andere Kramer Medienkonverter Handbücher

Kramer

Kramer KDS-EN3 Bedienungsanleitung

Kramer

Kramer FC-32 Bedienungsanleitung

Kramer

Kramer FC-174 Bedienungsanleitung

Kramer

Kramer VP-437N Bedienungsanleitung

Kramer

Kramer VM-2DP Bedienungsanleitung

Kramer

Kramer VP-2XL Bedienungsanleitung

Kramer

Kramer VP-2K Bedienungsanleitung

Kramer

Kramer FC-331A Bedienungsanleitung

Kramer

Kramer FC-31 Bedienungsanleitung

Kramer

Kramer VA-40 Bedienungsanleitung

Kramer

Kramer VP-409 Bedienungsanleitung

Kramer

Kramer VM-28H Bedienungsanleitung

Kramer

Kramer FC-7402 Bedienungsanleitung

Kramer

Kramer VP-419XL Bedienungsanleitung

Kramer

Kramer PIP-400 Bedienungsanleitung

Kramer

Kramer 482 Bedienungsanleitung

Kramer

Kramer VP-424C Bedienungsanleitung

Kramer

Kramer FC-14 Bedienungsanleitung

Kramer

Kramer VP-475UX Bedienungsanleitung

Kramer

Kramer VM-28H Bedienungsanleitung

Kramer

Kramer DigiTOOLS VM-2HDMI Bedienungsanleitung

Kramer

Kramer VA-10 Bedienungsanleitung

Kramer

Kramer VP-505 Bedienungsanleitung

Kramer

Kramer VS-411UHD Bedienungsanleitung

Beliebte Medienkonverter Handbücher anderer Marken

SoundTraxx

SoundTraxx Blunami BLU-2200 Bedienungsanleitung

SPROLINK

SPROLINK VA1 Bedienungsanleitung

Acclaim Lighting

Acclaim Lighting DDC-1-AC Bedienungsanleitung

Nikon

Nikon AF-S TC-20E III Bedienungsanleitung

Axis

Axis AXIS Q7406 Bedienungsanleitung

Omega

Omega TAC80B-J Bedienungsanleitung

Zoom

Zoom Thunderbolt TAC-2R Bedienungsanleitung

OST

OST iConverter 10/100M Bedienungsanleitung

Vertiv

Vertiv Netsure Bedienungsanleitung

birddog

birddog MINI Bedienungsanleitung

Roland

Roland GI-10 Bedienungsanleitung

Wallenstein

Wallenstein WX310 Bedienungsanleitung

Pace

Pace MSS 200-1 Bedienungsanleitung

Solar Converters

Solar Converters EQ 12/24-50 Bedienungsanleitung

CYP

CYP EL-7400V Bedienungsanleitung

TIE

TIE MIDI 1i1o Bedienungsanleitung

DCS

DCS Vivaldi Upsampler Bedienungsanleitung

Westermo

Westermo MCW-211 SERIES Bedienungsanleitung