Kramer VP-424C Bedienungsanleitung

VP‑424C Quick Start

P/N:

2900- 301056QS

Rev:

Scan for full manual

VP‑424C Quick Start Guide

This guide helps YWOU install and use your VP‑424C for the first time.

Go to www.kramerav.com/downloads/VP-424C to download the latestuser manual and check if firmware

upgrades are available.

Step 1: Check what’s in the box

VP‑424C 4K HDMI/USB‑C Scaler

1 Bracket set

1 Quick start guide

1 Power adapter and cord

4 Rubber feet

Step 2: Get to know your VP‑424C

Feature

Function

ON LED

Lights green when the unit is powered.

INPUT Button

Press to toggle the input between HDMI and USB-C.

HDMI™LED

Lights when the HDMI input is selected.

USB-C LED

Lights when the USB-C input is selected.

MENU Button

Press to enter/escape the on-screen display (OSD) menu. Press together with

the –button to reset to 1080p (RESET TO 1080P).

ENTER Button

In OSD, press to choose the highlighted menu item. Press together with the

+ button to reset to XGA (RESET TO XGA).

–Button

In OSD, press to move backward through the list or to decrement the

parameter value.

+/FREEZE Button

In OSD, press to move forward through the list or to increment the parameter

value. When not in OSD, press to freeze the display.

PROG USB Connector

Connect to a USB memory stick for upgrading the firmware.

USB-C IN USB Type C Port

Connect to a USB type-C audio-video source.

HDMI™ IN Connector

Connect to an HDMI source.

HDMI™OUT Connector

Connect to an HDMI acceptor.

REMOTE 3-pin Terminal Block Connector

Connect to contact closure switches (by momentary contact between the

desired pin and GND pin) to select an input.

5V DC

+5V DC connector for powering the unit.

The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.

Step 3: Install the VP‑424C

Install VP‑424C using one of the following methods:

•Attach the rubber feet and place the unit on a flat surface.

•Fasten a bracket (included) on each side of the unit and attach it to a flat surface.

For more information go to www.kramerav.com/downloads/VP-424C.

•Mount the unit in a rack using the recommended rack adapter

(see www.kramerav.com/product/VP-424C).

Step 4: Connect the inputs and outputs

Always switch OFF the power on each device before connecting it to your VP‑424C. For best results, we recommend that you

always use Kramer high-performance cables to connect AV equipment to the VP‑424C.

Step 5: Connect the power

Connect the power cord to VP‑424C and plug it into the mains electricity.

Safety Instructions

Caution:

There are no operator serviceable parts inside the unit.

Warning:

Use only the power cord that is supplied with the unit.

Warning:

Do not open the unit. High voltages can cause electrical shock! Servicing by

qualified personnel only.

Warning:

Disconnect the power and unplug the unit from the wall before installing.

See www.KramerAV.com for updated safety information

Step 6: Operate and control the VP‑424C

Select the input via the following options:

•Press the front panel INPUT button.

•Use the contact closure terminal block to select an input remotely with the

press of a button.

Press the MENU button to configure and control the device via OSD menu:

•Set brightness, contrast, color, noise reduction etc.

•Manage EDID.

•Configure HDCP behavior.

•Select resolution and aspect ratio.

•Manage auto power down (Auto Sync Off).

•View device information.

•Reset to factory default parameters.

•Control OSD display.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Kramer Medienkonverter Handbücher

Kramer

Kramer VA-256XL Bedienungsanleitung

Kramer

Kramer VM-4H Bedienungsanleitung

Kramer

Kramer VP-409 Bedienungsanleitung

Kramer

Kramer KDS-USB2 Kit Bedienungsanleitung

Kramer

Kramer VM-2DP Bedienungsanleitung

Kramer

Kramer VM-24HC Bedienungsanleitung

Kramer

Kramer KDS-EN6 Bedienungsanleitung

Kramer

Kramer VM-80HP Bedienungsanleitung

Kramer

Kramer PT-871/2xr-KIT Bedienungsanleitung

Kramer

Kramer VM-50AN Bedienungsanleitung

Kramer

Kramer DigiTOOLS VM-2HDMI Bedienungsanleitung

Kramer

Kramer FC-31xl Bedienungsanleitung

Kramer

Kramer VP-440H2 Bedienungsanleitung

Kramer

Kramer 575 Bedienungsanleitung

Kramer

Kramer FC-70R Bedienungsanleitung

Kramer

Kramer KDS-17DEC Bedienungsanleitung

Kramer

Kramer VM-218DT Bedienungsanleitung

Kramer

Kramer VP-425 Bedienungsanleitung

Kramer

Kramer VP-501x1 Bedienungsanleitung

Kramer

Kramer FC-4000 Bedienungsanleitung

Kramer

Kramer VW-16 Bedienungsanleitung

Kramer

Kramer VA-10 Bedienungsanleitung

Kramer

Kramer FC-5000 Bedienungsanleitung

Kramer

Kramer VW-9 Bedienungsanleitung

Beliebte Medienkonverter Handbücher anderer Marken

SoundTraxx

SoundTraxx Blunami BLU-2200 Bedienungsanleitung

SPROLINK

SPROLINK VA1 Bedienungsanleitung

Acclaim Lighting

Acclaim Lighting DDC-1-AC Bedienungsanleitung

Nikon

Nikon AF-S TC-20E III Bedienungsanleitung

Axis

Axis AXIS Q7406 Bedienungsanleitung

Omega

Omega TAC80B-J Bedienungsanleitung

Zoom

Zoom Thunderbolt TAC-2R Bedienungsanleitung

OST

OST iConverter 10/100M Bedienungsanleitung

Vertiv

Vertiv Netsure Bedienungsanleitung

birddog

birddog MINI Bedienungsanleitung

Roland

Roland GI-10 Bedienungsanleitung

Wallenstein

Wallenstein WX310 Bedienungsanleitung

Pace

Pace MSS 200-1 Bedienungsanleitung

Solar Converters

Solar Converters EQ 12/24-50 Bedienungsanleitung

CYP

CYP EL-7400V Bedienungsanleitung

TIE

TIE MIDI 1i1o Bedienungsanleitung

DCS

DCS Vivaldi Upsampler Bedienungsanleitung

Westermo

Westermo MCW-211 SERIES Bedienungsanleitung