KWIK GOAL 2B3024 Bedienungsanleitung

NZ468 Rev. 02/16/21

Base (2)

(Part# UZ1695)

24-3/4”

Crossbar Corner (4)

(Part# UZ810)

Post Corner (2)

(Part# UZ811)

Crossbar (2)

(Part# UZ1088)

279-3/4”

Post (2)

(Part# KP-290-050)

24-3/4”

Right Post (1)

(Part# UZ1697)

24-3/4”

Left Post (1)

(Part# UZ1696)

24-3/4”

ID STICKER

140 Pacific Drive Quakertown, PA 18951

800-531-4252 Kwikgoal.com

2021 Kwik Goal Ltd. ©

Any modifications to this or any Kwik Goal product will void any and all warranties.

***CAUTION***

This goal has been designed to be used for the game of soccer only. Goal posts must be anchored AT ALL TIMES

and shall be secured against overturning. Do not climb on the net or goal framework at any time! All fastenings

must be checked to insure they are fully tightened before and after each use of this product. Goal posts not in use

must be disassembled and properly stored in a safe, secure area (See included Guidelines for Movable Soccer Goal

Safety.). Assembled goal posts should not be left unattended. Remove nets when goals are not in use. Do not use

this equipment during the threat of high winds. Goal posts should be checked for safety before and after each use.

All warning and safety labels included with this product must be visible at all times.

02/16/21 - CREATED - JS

Revisions:

1. Unpack all parts and check for damage that may have occurred during shipping. If damage has occurred,

notify Kwik Goal immediately. Lay out all parts. Remove all cardboard and packaging immediately. Wet or

damp packaging may damage contents.

2. Read through entire instruction before beginning assembly and installation.

NOTE: Components may be packaged in one or more additional boxes.

ASSEMBLY INSTRUCTIONS FOR 2B3024 FINISHING GOAL

NZ468 Rev. 02/16/21

140 Pacific Drive Quakertown, PA 18951

800-531-4252 Kwikgoal.com

2019 Kwik Goal Ltd. ©

6. NEVER allow anyone to climb on the net or goal framework.

7. Movable soccer goals should only be used on LEVEL fields, NEVER on a slope

or hill area.

IMPORTANT GOAL SAFETY INSTRUCTIONS

READ CAREFULLY

1. Check for structural integrity and proper connecting hardware before every

use. Replace damaged or missing parts or fasteners immediately.

2. Safety/Warning labels must be clearly visible.

3. Securely anchor movable soccer goals at ALL times.

4. Always instruct players, managers, coaches, trainers, teachers, maintenance

workers and all other personnel who might come in contact with the goal,

on the safe handling of and potential dangers associated with movable

soccer goals.

5. Always exercise extreme caution when moving goals and provide adequate

manpower to move goals of varied sizes and weights. Movable soccer goals

should only be moved by authorized personnel.

9. Most of the tip-over injuries occurred when goals were unattended. Anchor

or chain one goal to another or to nearby fence posts, dugouts, or any

other similar sturdy fixture when not in use. If this is not practical, store

movable soccer goals in a place where children cannot have access to them.

8. Remove nets when goals are not in use.

10. Fully disassemble goals for seasonal storage.

WARNING

NZ468 Rev. 02/16/21

before beginning assembly.

3/8“ Flat Washer (Part# TZ60) (24)

Hardware

3/8“ Lock Washer (Part# TZ65) (24)

3/8“ x 1-3/4” Hex Bolt (Part# TZ227) (24)

Note: Hardware may be packaged separately

in one or more boxes. Open all packages

Channel Spacer (12)

(Part# UZ812)

Net Clip (80)

(Part# 10B3101 Pack of 100)

Net (1)

(Part# 3B3024)

Assembly Tools

Scissors

9/16”

Wrench

9/16

Ratchet with

9/16”

Socket

Mallet

“J” Anchor (4)

(Part# 10B9001 Pack of 4)