KWIK GOAL FUSION 120 GOAL Bedienungsanleitung

NZ252 Rev. 09/11/18

86”

Base (2)

(Part# UZ1290)

84”

Right Post (1)

(Part# UZ1273)

280”

Crossbar (1)

(Part# UZ987)

84”

Date of

manufacture

sticker

Left Post (1)

(Part# UZ1276)

140 Pacific Drive Quakertown, PA 18951

(P) 215-536-2200 / (P) 800-531-4252 / (F) 215-536-4309 / (F) 800-778-8869

Visit our website @ kwikgoal.com

2006, Rev. 2018 Kwik Goal Ltd.

280”

Back Bottom Bar (1)

(Part# UZ966)

***CAUTION***

This goal has been designed to be used for the game of soccer only. Goal posts must be anchored AT ALL TIMES

and shall be secured against overturning. Do not climb on the net or goal framework at any time! All fastenings

must be checked to insure they are fully tightened before and after each use of this product. Goal posts not in use

must be disassembled and properly stored in a safe, secure area (See included Guidelines for Moveable Soccer Goal

Safety.). Assembled goal posts should not be left unattended. Remove nets when goals are not in use. Do not use

this equipment during the threat of high winds. Goal posts should be checked for safety before and after each use.

All warning and safety labels included with this product must be visible at all times.

Any modifications to this or any Kwik Goal product will void any and all warranties.

ASSEMBLY INSTRUCTIONS FOR 2B3906 FUSION 120 GOAL

1. Unpack all parts and check for damage that may have occurred during shipping. If damage has occurred,

notify Kwik Goal immediately. Lay out all parts. Remove all cardboard and packaging immediately. Wet or

damp packaging may damage contents.

2. Read through entire instruction before beginning assembly and installation.

NOTE: Components may be packaged in one or more additional boxes.

140 Pacific Drive Quakertown, PA 18951

(P) 215-536-2200 / (P) 800-531-4252 / (F) 215-536-4309 / (F) 800-778-8869

Visit our website @ kwikgoal.com

1998 rev 2009 Kwik Goal Ltd.

IMPORTANT GOAL SAFETY INSTRUCTIONS

READ CAREFULLY

1. Check for structural integrity and proper connecting hardware before every

use. Replace damaged or missing parts or fasteners immediately.

2. Safety/Warning labels must be clearly visible.

3. Securely anchor moveable soccer goals at ALL times.

4. Always instruct players, managers, coaches, trainers, teachers, maintenance

workers and all other personnel who might come in contact with the goal,

on the safe handling of and potential dangers associated with moveable

soccer goals.

5. Always exercise extreme caution when moving goals and provide adequate

manpower to move goals of varied sizes and weights. Moveable soccer goals

should only be moved by authorized personnel.

6. NEVER allow anyone to climb on the net or goal framework.

7. Moveable soccer goals should only be used on LEVEL fields, NEVER on a

slope or hill area.

8. Remove nets when goals are not in use.

9. Most of the tip-over injuries occurred when goals were unattended. Anchor

or chain one goal to another or to nearby fence posts, dugouts, or any other

similar sturdy fixture when not in use. If this is not practical, store moveable

soccer goals in a place where children cannot have access to them.

10. Fully disassemble goals for seasonal storage.

NZ252 Rev. 09/11/18

Hardware

Note: Hardware may be packaged separately

in one or more boxes. Open all packages

before beginning assembly.

3/8“ x 1-3/4” Hex Bolt (Part# TZ227) (26)

3/8" x 7/8" Hex Bolt (Part# TZ249) (12)

3/8“ Lock Washer (Part# TZ65) (34)

3/8“ Flat Washer (Part# TZ60) (38)

3/8” Lock Nut (Part# TZ197) (4)

3/8" Square Nut (Part# TZ247) (12)

5/16" Eyebolt (Part# TZ270) (2)

5/16" Flat Washer (Part# TZ269) (2)

5/16” Lock Nut (Part# TZ5) (2)

7/16” x 5 1/2” Bolt Hex (Part# TZ291) (4)

7/16" Flat Washer (Part# TZ171) (8)

7/16” Lock Nut (Part# TZ47) (4)

Backstay Brace (2)

(Part# VZ328P2)

Channel Spacer (10)

(Part# UZ812)

Post Brace (2)

(Part# 10B6201 Pack of 2)

Post Corner (2)

(Part# UZ998)

Crossbar Corner (2)

(Part# UZ989)

Backstay (2)

(Part# VZ328P1)

Net Strap (1)

(Part# 10B4406)

Assembly Tools

9/16

1/2”, 9/16”, 5/8”

& 3/4” Wrenches

Ratchet with

1/2”, 9/16”, 5/8”

& 3/4” Sockets

Scissors

AND

Back Bottom Bar

Connector (2)

(Part# UZ1033)

Chain (4)

w/ Snap Link & Anchor Plate

(Part# UZ846 )

Net (1)

(Part# 3B5921)

Base Cap (2)

(Part# UZ1035)

Anchor Bag (6)

(Part# 10B1605)